FREE SHIPPING from € 89,- AT / € 150,- DE 

FREE SHIPPING: AT, from 89,- € / DE, from 99,- € / CH from 199,- / FR, BE, BG, FR, IT, HR, NL from 299,- €

Housing-Ø (mm): 21
Housing length (mm): 21
LiPo (S): 2
Plug (mm): 2
Shaft-Ø (mm): 2
Propeller: 4,5x4 / 5x3
Weight (g): 15
Examples of use: Segler -700g; 3D -200g
RPM/V: 2900
Engine-type: External rotor
recom. Controller: 5 - 10 A
Innenwiderstand (mOhm): 0,185
Number of poles: 12
Leerlaufstrom (A): 1
Weight category (g): 0 to 50

The A10 motors are compact outrunner motors from our A-series and offer high efficiency at low weight. The A10 motors are available as direct drive and as gear drive for small motor and glider models. This small weight-optimized high-end direct drive is often used in motor and 3D models around 200g take-off weight.

The gearbox version is used in the HLG and RES class and is perfect for all small and light glider models up to approx. 700g take-off weight.

Specifications:
  • max. power range [W] (max.15 sec.)55
  • Poles12
  • Idle current (I0) at 8.4V [A]1
  • Internal resistance (Ri) [Ohm]0,185
  • Recommended timing [°]20 - 25
  • Switching Frequency [kHz]8
  • Controller recommendation [A] (depending on setup)5 - 10
  • Idle speed per volt (kv)2900
  • Prop AdapterYes
  • Mounting crossYes
  • Gold plug mm (soldered)2
  • Backmount mountableshaft conversion required
  • Front mountableYes


Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

HACKER Motoren GmbH
Schinderstrassl 32
84030 Ergolding
DEUTSCHLAND
Tel: 0049/871953628-0
[email protected]

HACKER A10 12S BRUSHLESS MOTOR
Product number: 66161
Manufacturer number: 97100006

€40.99*

Prices incl. VAT plus shipping costs

Not in stock. Available only by special order in approx. 7 to 21 business days.

Privacy

Housing-Ø (mm): 21
Housing length (mm): 21
LiPo (S): 2
Plug (mm): 2
Shaft-Ø (mm): 2
Propeller: 4,5x4 / 5x3
Weight (g): 15
Examples of use: Segler -700g; 3D -200g
RPM/V: 2900
Engine-type: External rotor
recom. Controller: 5 - 10 A
Innenwiderstand (mOhm): 0,185
Number of poles: 12
Leerlaufstrom (A): 1
Weight category (g): 0 to 50

The A10 motors are compact outrunner motors from our A-series and offer high efficiency at low weight. The A10 motors are available as direct drive and as gear drive for small motor and glider models. This small weight-optimized high-end direct drive is often used in motor and 3D models around 200g take-off weight.

The gearbox version is used in the HLG and RES class and is perfect for all small and light glider models up to approx. 700g take-off weight.

Specifications:
  • max. power range [W] (max.15 sec.)55
  • Poles12
  • Idle current (I0) at 8.4V [A]1
  • Internal resistance (Ri) [Ohm]0,185
  • Recommended timing [°]20 - 25
  • Switching Frequency [kHz]8
  • Controller recommendation [A] (depending on setup)5 - 10
  • Idle speed per volt (kv)2900
  • Prop AdapterYes
  • Mounting crossYes
  • Gold plug mm (soldered)2
  • Backmount mountableshaft conversion required
  • Front mountableYes


Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)

HACKER Motoren GmbH
Schinderstrassl 32
84030 Ergolding
DEUTSCHLAND
Tel: 0049/871953628-0
[email protected]

This website uses cookies to ensure the best experience possible. More information...