HACKER A30 12XL V4 BRUSHLESS MOTOR
Product number:
9738392
Manufacturer number:
15716108
€104.99*
Only a few left in stock, ready for shipment within 1 working day. Delivery time 1-3 working days.
| Housing-Ø (mm): | 37,2 |
|---|---|
| Housing length (mm): | 46 |
| LiPo (S): | 3-4 |
| Plug (mm): | 3,5 |
| Shaft-Ø (mm): | 5 |
| Propeller: | 3S 14x8/ 4S 11x8,5/12x8 |
| Weight (g): | 177 |
| Examples of use: | E-Modelle 1,8-3kg, Gleitschirmen, 3D |
| RPM/V: | 700 |
| Engine-type: | External rotor |
| recom. Controller: | 55-70A |
| Innenwiderstand (mOhm): | 0,034 |
| Number of poles: | 14 |
| Leerlaufstrom (A): | 1,5 |
| Weight category (g): | 100 to 250 |
This small and lightweight outrunner is offered in four lengths (S, M, L, XL). The A30 motors, are perfect for operation on 3S or 4S LiPo batteries. The A30-V4 series comes with an optimized integrated fan and high quality ball bearings. This increases efficiency, stability and increases the range of use. The perfect drive in motor models, electric gliders, paragliders and 3D models.
This weight-optimized high-end motor with a weight of only 177g fits perfectly in motor models up to 1.8 kg and gliders up to 3kg.
Specifications:
Scope of delivery / features
This weight-optimized high-end motor with a weight of only 177g fits perfectly in motor models up to 1.8 kg and gliders up to 3kg.
Specifications:
- Maximum power in watts (max. 15 sec): 650
- Number of poles: 14
- No-load current (I0) at 8.4V [A]: 1.5
- Internal resistance (Ri) [Ohm]: 0.034
- Recommended timing [°]: 20 - 25
- Recommended clock frequency [kHz]: 8
- Recommended controller [A] (depending on setup): 55 - 70
- No-load speed per volt (kV): 700
Scope of delivery / features
- Prop driver: Yes
- Mounting cross: Yes
- Gold connector mm (soldered): 3.5
- Backmountable: Yes
- Frontmountable: Yes
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
HACKER Motoren GmbH
Schinderstrassl 32
84030 Ergolding
DEUTSCHLAND
Tel: 0049/871953628-0
[email protected]