HACKER A40 -10S V4G kv1600 + 6.7:1 PG
Product number:
9800548
Manufacturer number:
10109537
€279.00*
Not in stock. Available only by special order in approx. 7 to 21 business days.
- 1x A40-10S V4G kv1600 + 6,7:1 PG
- Manual
| Housing-Ø (mm): | 41,7 |
|---|---|
| Housing length (mm): | 74 |
| LiPo (S): | 6 |
| Plug (mm): | ohne |
| Shaft-Ø (mm): | 6 |
| Propeller: | RFM 20x13/23x12, Falcon 21x13/22x12 |
| Weight (g): | 247 |
| Examples of use: | Segler 8kg |
| RPM/V: | 1600 |
| Engine-type: | External rotor |
| recom. Controller: | 70-90A |
| Innenwiderstand (mOhm): | 0,012 |
| Number of poles: | 8 |
| Leerlaufstrom (A): | 2,75 |
| Weight category (g): | 100 to 250 |
This A40 gear drive is equipped with the 8-pole version of the A40-S motor, which has proven itself thousands of times over. The high-torque, high-speed external rotor in combination with the efficient 6.7:1 planetary gearbox has been specially developed for larger electric gliders up to approx. 8 kg take-off weight. Thanks to the perfect coordination of motor and gearbox, this power pack can drive propellers up to 23 inches efficiently and powerfully. It is a very robust and reliable system that works reliably even under extreme conditions and high loads.
This weight-optimised high-end motor with a weight of only 247g fits perfectly in gliders up to 8 kg.
Specifications:
This weight-optimised high-end motor with a weight of only 247g fits perfectly in gliders up to 8 kg.
Specifications:
- Maximum power in watts (max. 15 seconds): 1500
- Number of poles: 8
- Turns: 10
- No-load current (I0) at 8.4V [A]: 2.75
- Internal resistance (Ri) [Ohm]: 0.012
- Gear ratio: 6.7:1
- Recommended timing [°]: 15-20
- Recommended clock frequency [kHz]: 8
- Recommended speed controller [A] (depending on setup): 70-90
- No-load speed per volt (kV) without gear: 1600
- Prop driver: No
- Mounting cross: No
- Gold connector mm (soldered): No
- Gold connector mm (recommended): 4
- Backmount mountable: No
- Front mountable: Yes
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
HACKER Motoren GmbH
Schinderstrassl 32
84030 Ergolding
DEUTSCHLAND
Tel: 0049/871953628-0
[email protected]