HACKER A50 12L GLIDER WITH LONG SHAFT 355/KV FOR EXAMPLE SAILPLANES UP TO 14KG BRUSHLESS MOTOR
Product number:
9709699
Manufacturer number:
97826833
| Housing-Ø (mm): | 48,7 |
|---|---|
| Housing length (mm): | 73,5 |
| LiPo (S): | 6-8 |
| Plug (mm): | ohne |
| Shaft-Ø (mm): | 6 |
| Propeller: | 6S 18,5x10, 8S 13x10 |
| Weight (g): | 503 |
| Examples of use: | Segler 11,5-15kg |
| RPM/V: | 355 |
| Engine-type: | External rotor |
| recom. Controller: | 70A |
| Innenwiderstand (mOhm): | 0,021 |
| Number of poles: | 14 |
| Leerlaufstrom (A): | 1,5 |
| Weight category (g): | 500 to 750 |
The Glider motor fits seamlessly into our range of sail noses/FES drives. Due to the shaft extension with integrated support bearing, this drive can also be installed in slim sail noses. The shaft can be easily moved by loosening the three M3 screws on the back. The model can be converted to a glider in no time. It is possible to switch between electric flight and glider towing. The shaft has a diameter of 6 mm, for the use of the usual prop drivers and scalespinners.
This weight-optimised high-end motor with a weight of only 503g fits perfectly in large glider models Ventus 2CX, 6m wingspan, 11.5kg to approx. 15kg
Specifications
For a long time Hacker Motor GmbH has been offering a wide variety of drive setups for sailors, especially with gearboxes. Now we have special versions of our well-known reliable and high-quality external rotor in our range. Conversion kits are also available for various engine types. These offer a long shaft and a front support ball bearing for perfect concentricity. For example, Scale sailors' models can be equipped almost invisibly with a Hacker brushless motor, a visually disturbing spinner is then no longer necessary.
This weight-optimised high-end motor with a weight of only 503g fits perfectly in large glider models Ventus 2CX, 6m wingspan, 11.5kg to approx. 15kg
Specifications
- Max. power in watts (max. 15 seconds): 1650
- Poles: 14
- Turns: 12
- No-load current (I0) at 8.4V [A]: 1.5
- Internal resistance (Ri) [Ohm]: 0.021
- Recommended timing [°]: 20 - 25
- Recommended clock frequency [kHz]: 8
- Recommended speed controller [A] (depending on setup): 70
- No-load speed per volt (kV): 355
- Prop Adapter: No
- Mounting cross: Yes
- Gold plug mm (recommended): 4
- Backmount mountable: No
- Front mountable: Yes
For a long time Hacker Motor GmbH has been offering a wide variety of drive setups for sailors, especially with gearboxes. Now we have special versions of our well-known reliable and high-quality external rotor in our range. Conversion kits are also available for various engine types. These offer a long shaft and a front support ball bearing for perfect concentricity. For example, Scale sailors' models can be equipped almost invisibly with a Hacker brushless motor, a visually disturbing spinner is then no longer necessary.
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
HACKER Motoren GmbH
Schinderstrassl 32
84030 Ergolding
DEUTSCHLAND
Tel: 0049/871953628-0
[email protected]