HACKER A60-6M V4 28-Pole FesEx kv240
Product number:
9793947
Manufacturer number:
10109214
€303.99*
Not in stock. Available only by special order in approx. 7 to 21 business days.
- 1x A60-6M V4 28-Pole Glider kv240
- 1x mounting cross
- 4x screws
| Housing-Ø (mm): | 60 |
|---|---|
| Housing length (mm): | 72,8 |
| LiPo (S): | 8-10 |
| Plug (mm): | ohne |
| Shaft-Ø (mm): | 8 |
| Propeller: | 8s 20x13/23x12, 10s 17x13/18,5x12 |
| Weight (g): | 740 |
| Examples of use: | Segler bis 20kg |
| RPM/V: | 180 |
| Engine-type: | External rotor |
| recom. Controller: | 80-120A |
| Innenwiderstand (mOhm): | 0,018 |
| Number of poles: | 28 |
| Leerlaufstrom (A): | 1,58 |
| Weight category (g): | 500 to 750 |
The A60-6M FesEx is perfect for large glider models weighing up to 20 kilograms and with an 8s or 10s drive battery.
Accessories: FesEx-Uni8 system
Thanks to its special shaft, the motor can be equipped with the FesEx-Uni8 system (see accessories tab) without any further modifications. The propeller can then be removed with just the push of a button, and the model still looks like a fully-fledged glider. The change from a self-launching Fes model to a pure glider can be done in seconds.
Specifications:
Accessories: FesEx-Uni8 system
Thanks to its special shaft, the motor can be equipped with the FesEx-Uni8 system (see accessories tab) without any further modifications. The propeller can then be removed with just the push of a button, and the model still looks like a fully-fledged glider. The change from a self-launching Fes model to a pure glider can be done in seconds.
Specifications:
- Number of poles: 28
- Turns: 6
- No-load current (I0) at 8.4V [A]: 1.58
- Internal resistance (Ri) [Ohm]: 0.018
- Recommended timing [°]: 20 - 25
- Recommended clock frequency [kHz]: 8
- Recommended speed controller [A] (depending on setup): 80 - 120
- No-load speed per volt (kV): 240
- Prop driver: No
- Mounting cross: Yes
- Gold connector mm (recommended): 4 - 5.5
- Backmountable: No
- Frontmountable: Yes
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
HACKER Motoren GmbH
Schinderstrassl 32
84030 Ergolding
DEUTSCHLAND
Tel: 0049/871953628-0
[email protected]