- Inrunner with reducting gear
- GRP spacer ring
- special drive grease
- mounting and operating manual
| Housing-Ø (mm): | 46 |
|---|---|
| Housing length (mm): | 109,85 |
| LiPo (S): | 10 |
| Shaft-Ø (mm): | 6 |
| Propeller: | 17x13 |
| Weight (g): | 520 |
| Examples of use: | sportliche Segler mit ca. 16-18kg |
| RPM/V: | 1960 |
| Engine-type: | Internal rotor |
| recom. Controller: | 130-135A |
| Innenwiderstand (mOhm): | 0,009 |
| Number of poles: | 4 |
| Leerlaufstrom (A): | 3,5 |
| Weight category (g): | 500 to 750 |
Compact 4 pole inrunner motor with 6.7:1 reducting gear and 6 millimeter shaft e. g. suitable in combination with the the FesEx-Uni8 system.
Drive recommendation
This setup is recommended for sport gliders with approx. 16 to 18 kilograms take-off weight and 10S LiPo drive battery.
Drive recommendation
This setup is recommended for sport gliders with approx. 16 to 18 kilograms take-off weight and 10S LiPo drive battery.
- Propeller: RFM 17x13
- Voltage (Cells LiPo): 37.5V (10S)
- Current: 118A
- Power: 4366W
- RPM: 9980
- Controller: MasterMEZON 130, MasterMEZON 135 opto or MasterMEZON opto lite
- Turns1,5 Y
- Idle current (I0) at 37V [A]3,5
- Internal resistance (Ri) [Ohm]0,009
- Gear reducing6,7:1
- Output shaft6mm
- Recommended timing [°]5-10
- Switching Frequency [kHz]8000
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
HACKER Motoren GmbH
Schinderstrassl 32
84030 Ergolding
DEUTSCHLAND
Tel: 0049/871953628-0
[email protected]
HACKER C54-2D XL Glider 6,7:1 Competition Kv 1960
Product number:
9796258
Manufacturer number:
10108908
€689.00*
Not in stock. Available only by special order in approx. 7 to 21 business days.
Additionally selected items:
- Inrunner with reducting gear
- GRP spacer ring
- special drive grease
- mounting and operating manual
| Housing-Ø (mm): | 46 |
|---|---|
| Housing length (mm): | 109,85 |
| LiPo (S): | 10 |
| Shaft-Ø (mm): | 6 |
| Propeller: | 17x13 |
| Weight (g): | 520 |
| Examples of use: | sportliche Segler mit ca. 16-18kg |
| RPM/V: | 1960 |
| Engine-type: | Internal rotor |
| recom. Controller: | 130-135A |
| Innenwiderstand (mOhm): | 0,009 |
| Number of poles: | 4 |
| Leerlaufstrom (A): | 3,5 |
| Weight category (g): | 500 to 750 |
Compact 4 pole inrunner motor with 6.7:1 reducting gear and 6 millimeter shaft e. g. suitable in combination with the the FesEx-Uni8 system.
Drive recommendation
This setup is recommended for sport gliders with approx. 16 to 18 kilograms take-off weight and 10S LiPo drive battery.
Drive recommendation
This setup is recommended for sport gliders with approx. 16 to 18 kilograms take-off weight and 10S LiPo drive battery.
- Propeller: RFM 17x13
- Voltage (Cells LiPo): 37.5V (10S)
- Current: 118A
- Power: 4366W
- RPM: 9980
- Controller: MasterMEZON 130, MasterMEZON 135 opto or MasterMEZON opto lite
- Turns1,5 Y
- Idle current (I0) at 37V [A]3,5
- Internal resistance (Ri) [Ohm]0,009
- Gear reducing6,7:1
- Output shaft6mm
- Recommended timing [°]5-10
- Switching Frequency [kHz]8000
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
HACKER Motoren GmbH
Schinderstrassl 32
84030 Ergolding
DEUTSCHLAND
Tel: 0049/871953628-0
[email protected]