- 1 A60-8M V4 28-pole glider kv180
- 1x mounting cross and 4x screws
| Housing-Ø (mm): | 60 |
|---|---|
| Housing length (mm): | 72,8 |
| LiPo (S): | 12 |
| Plug (mm): | ohne |
| Shaft-Ø (mm): | 8 |
| Propeller: | 20x13 RFM |
| Weight (g): | 740 |
| Examples of use: | Segler 25kg |
| RPM/V: | 180 |
| Engine-type: | External rotor |
| recom. Controller: | 70-100A |
| Innenwiderstand (mOhm): | 0,03 |
| Number of poles: | 28 |
| Leerlaufstrom (A): | 1,5 |
| Weight category (g): | 500 to 750 |
The Air Zermatt Helicopter is a detailed replica of the Swiss original type EC 135. The model impresses with its particularly self-stable flight behavior. Here’s the best part: The A60-8M FesEx is perfectly suited for large sailplane models of up to approximately 25 kilograms and a 12S LiPo drive battery.
Accessories: FesEx-Uni8 System
Thanks to its special shaft, the motor can be equipped with the FesEx-Uni8 system (see Accessories tab) without any further modifications. The propeller can then be removed with just a push of a button, and the model retains its appearance as a full-fledged sailplane. The transition between a self-launching Fes model and a pure glider can be made in seconds.
Specifications:
Accessories: FesEx-Uni8 System
Thanks to its special shaft, the motor can be equipped with the FesEx-Uni8 system (see Accessories tab) without any further modifications. The propeller can then be removed with just a push of a button, and the model retains its appearance as a full-fledged sailplane. The transition between a self-launching Fes model and a pure glider can be made in seconds.
Specifications:
- Number of poles: 28
- Turns: 8
- No-load current (I0) at 8.4V [A]: 1.5
- Internal resistance (Ri) [Ohm]: 0.03
- Recommended timing [°]: 20 - 25
- Recommended clock frequency [kHz]: 8
- Recommended speed controller [A] (depending on setup): 70 - 100
- No-load speed per volt (kV): 180
- Prop driver: No
- Mounting cross: Yes
- Gold connector mm (recommended): 4 - 5.5
- Backmountable: No
- Frontmountable: Yes
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
HACKER Motoren GmbH
Schinderstrassl 32
84030 Ergolding
DEUTSCHLAND
Tel: 0049/871953628-0
[email protected]
Hacker A60-8M V4 28-pole FesEx kv180
Product number:
9804756
Manufacturer number:
15711908
€303.99*
Not in stock. Available only by special order in approx. 7 to 21 business days.
Additionally selected items:
- 1 A60-8M V4 28-pole glider kv180
- 1x mounting cross and 4x screws
| Housing-Ø (mm): | 60 |
|---|---|
| Housing length (mm): | 72,8 |
| LiPo (S): | 12 |
| Plug (mm): | ohne |
| Shaft-Ø (mm): | 8 |
| Propeller: | 20x13 RFM |
| Weight (g): | 740 |
| Examples of use: | Segler 25kg |
| RPM/V: | 180 |
| Engine-type: | External rotor |
| recom. Controller: | 70-100A |
| Innenwiderstand (mOhm): | 0,03 |
| Number of poles: | 28 |
| Leerlaufstrom (A): | 1,5 |
| Weight category (g): | 500 to 750 |
The Air Zermatt Helicopter is a detailed replica of the Swiss original type EC 135. The model impresses with its particularly self-stable flight behavior. Here’s the best part: The A60-8M FesEx is perfectly suited for large sailplane models of up to approximately 25 kilograms and a 12S LiPo drive battery.
Accessories: FesEx-Uni8 System
Thanks to its special shaft, the motor can be equipped with the FesEx-Uni8 system (see Accessories tab) without any further modifications. The propeller can then be removed with just a push of a button, and the model retains its appearance as a full-fledged sailplane. The transition between a self-launching Fes model and a pure glider can be made in seconds.
Specifications:
Accessories: FesEx-Uni8 System
Thanks to its special shaft, the motor can be equipped with the FesEx-Uni8 system (see Accessories tab) without any further modifications. The propeller can then be removed with just a push of a button, and the model retains its appearance as a full-fledged sailplane. The transition between a self-launching Fes model and a pure glider can be made in seconds.
Specifications:
- Number of poles: 28
- Turns: 8
- No-load current (I0) at 8.4V [A]: 1.5
- Internal resistance (Ri) [Ohm]: 0.03
- Recommended timing [°]: 20 - 25
- Recommended clock frequency [kHz]: 8
- Recommended speed controller [A] (depending on setup): 70 - 100
- No-load speed per volt (kV): 180
- Prop driver: No
- Mounting cross: Yes
- Gold connector mm (recommended): 4 - 5.5
- Backmountable: No
- Frontmountable: Yes
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
HACKER Motoren GmbH
Schinderstrassl 32
84030 Ergolding
DEUTSCHLAND
Tel: 0049/871953628-0
[email protected]