Downloads
Description "Robbe Modellsport MISTRAL 2.0 ARF STYRO/GRP/ABACHI AREA"
The Mistral now has a high-strength, abachi-planked wing in the 2.0 version. Although this increases the weight by approx. 150g compared to its predecessor, which has been tried and tested hundreds of times, it gives the Mistral 2.0 significantly more robustness in everyday use.
In flight, the Mistral 2.0 gets even more pull through and the hotliner-typical characteristics come to the fore much better.
The Mistral 2.0 is a multi-talent and the absolute fun model for the end of the working day! Thanks to the modified RG-15 profile and our recommended Ro-Power BL drive, vertical climbs are possible without any problems and are therefore reminiscent of a hotliner. Of course the Mistral 2.0 is not the same as a full-grp Hotliner, but that was not the goal.
The eye-catching and modern, neon-coloured hotliner design should help you to recognize the model well in the sky at any time and to distinguish it from other models in the air and on the ground.
Let yourself be impressed by the high speed range of the Mistral 2.0. A landing with flaps set is always a pleasure and absolutely stress-free, which is why the model is also suitable for advanced pilots.
Features:
- two-piece, Oracover covered Styro/GRP/Abachi surface with CFP plugging
- continuous sandwich beam (coal-pine coal) for maximum bending stiffness
- lacquered GRP hull with built-in wooden frames and CFP reinforcements
- large canopy for easy battery replacement
- ready hinged rudder
- prefabricated rudder linkage with articulated parts from German production
- ready-cut servo shaft and linkage covers
- modern, highly visible design
Test report RC-Network:
http://www.rc-network.de/forum/content.php/1120-Mistral-2-0-von-robbe
In flight, the Mistral 2.0 gets even more pull through and the hotliner-typical characteristics come to the fore much better.
The Mistral 2.0 is a multi-talent and the absolute fun model for the end of the working day! Thanks to the modified RG-15 profile and our recommended Ro-Power BL drive, vertical climbs are possible without any problems and are therefore reminiscent of a hotliner. Of course the Mistral 2.0 is not the same as a full-grp Hotliner, but that was not the goal.
The eye-catching and modern, neon-coloured hotliner design should help you to recognize the model well in the sky at any time and to distinguish it from other models in the air and on the ground.
Let yourself be impressed by the high speed range of the Mistral 2.0. A landing with flaps set is always a pleasure and absolutely stress-free, which is why the model is also suitable for advanced pilots.
Features:
- two-piece, Oracover covered Styro/GRP/Abachi surface with CFP plugging
- continuous sandwich beam (coal-pine coal) for maximum bending stiffness
- lacquered GRP hull with built-in wooden frames and CFP reinforcements
- large canopy for easy battery replacement
- ready hinged rudder
- prefabricated rudder linkage with articulated parts from German production
- ready-cut servo shaft and linkage covers
- modern, highly visible design
Test report RC-Network:
http://www.rc-network.de/forum/content.php/1120-Mistral-2-0-von-robbe
Technical data
Wing-span (mm): | 2000 |
---|---|
Flight weight approx. (g): | 1770 |
Empty weight approx. (g): | - |
Control: | H,S,Q,M,WK |
Length (mm): | - |
Manufacturer: | Robbe |
Fuselage: | GFK |
Wings: | Styro/Fiberglass/Abachi |
Rec. engine: | 35er Brushless Motor mit ca. 400W |
Rec. Battery: | 4S/2000-2500mAh LiXX |
Version: | ARF - ALMOST READY TO FLY |
Airfoil: | - |
Flight Skill: | Advanced |
Build Skill: | Advanced |
Drive Type: | Electric |
Box contents
- Model MISTRAL 2.0 incl. two-piece Styro/GfK/Abachi surface covered with Oracover
- CfK Surface plugging
- lacquered GRP hull with CfK reinforcements
- small items
- Assembly instructions in German/English
- CfK Surface plugging
- lacquered GRP hull with CfK reinforcements
- small items
- Assembly instructions in German/English
Das Produkt MISTRAL 2.0 ARF STYRO/GFK/ABACHI FLÄCHE von Robbe Modellsport in der Kategorie Electric Glider Models hat eine Spannweite von 2000 sowie ein Gewicht von 1770. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M,WK. Das Modell ist als ARF - ALMOST READY TO FLY ausgeführt . Wir empfehlen einen 4S/2000-2500mAh LiXX Akku für dieses Elektroflugmodell.
* Erklärung Steuerfunktionen:
* Erklärung Steuerfunktionen:
- H ... Höhenruder
- S ... Seitenruder
- Q ... Querruder
- M ... Motorsteuerung
- V ... Vektorsteuerung
- LK ... Landeklappen
- SK ... Störklappen
- WK ... Wölbklappen
- EZFW ... Einziehfahrwerk
- SKU ... Schleppkupplung
- ( ) ... optional - in Klammer geschriebene Steuerfunktionen sind bei dem beschriebenen Modell optional verfügbar