MODELLBAU LINDINGER Towing hitch profi with ball (DIPPI"

Product number: 9777602
Manufacturer number: SK1
EAN-Code: 9010189217763

€89.99*

In stock. Usually ships within 1 business day.

Description "MODELLBAU LINDINGER Towing hitch profi with ball (DIPPI""
Latzenfreie Schleppkupplung System Dipperer

Tow release for model gliders from 4 meters wingspan which ALWAYS opens: The Dipperer ball-coupling system has been tested for 50 years by many pilots in aero-tow operations and is also used in championships by professionals. High quality materials guarantee a safe function when installed properly - easy installation and indestructible!

- No more annoying insertion of the towing line!

Ball towing hitch system Dipperer

Installation instructions:

1. drill a 12 mm hole in the tip of the fuselage
2. fit the tow release, the leading edge should be flush with the fuselage nose
CAUTION: Do not machine the front part of the coupling (notch opening)!
3. fill the coupling opening with paper to avoid the penetration of glue during the gluing process
4. carefully glue the clutch housing with epoxy resin in the entire area of the knurled grilles
5. install a steering gear (servo) with an actuating force of 6-10 kg at the height of the tow release
6. for control on the rudder machine, fit a ball head connector on the innermost hole of the servo lever
7. set the servo lever to the rear dead center (side facing away from the tow release, see sketch)
8. make the connection to the steering gear with a 1,5 mm steel wire or rope. Cut the connecting rope or linkage to length so that the ball head connection is 3 mm in front of the ball head centre.
9. hanging position: coupling is open and the towing ball connection can be inserted
10. release position: by moving the servo (half turn of the servo lever) the ball locks in the clutch, servo is relieved