Junsi CB12-XH adapter plate XHR connector system - for Align/E-Sky, XHRIntended for connecting Lipo batteries with XHR balancer connector to Junsi iCharger X12The following connectors are available on the board:- 2x 3S- 2x 4S- 2x 5S- 2x 6S- Thus the following battery packs can be charged without further adapters:3s to 6s as single pack2 packs each connected in series - 3S+3S or 4S+4S or 5S+5S or 6S+6SWhen connecting 2 packs in series, the balancer connector of the battery connected to the main negative must always be in the first port on the board. The first port is marked by the long white line on the minus side of the board.If the order of the balancer connectors of the 2 packs is wrong, there are some SMD components on the bottom of the board that provide some reverse polarity protection for the balancer connectors. MT1759

MT1705

SK600020-04

89863002

MT1748

Multi Balancer Board 2-6 cells XH,EH, HP/PQ, TP/FP.(does not fit on Graupner and Power Peak chargers) SK600056

The HITEC Universal Balancer Board finally solves the problem that all battery manufacturers use different balancer systems. All common balancer systems are combined on one board. Whichever LiXX battery you want to charge, you will find the right adapter from 2-6 cells. The HITEC Universal Balancer Board comes with an XH connection cable for direct connection to all HiTEC chargers. In addition, we supply a second EH connection cable so that you can also plug it into all Graupner and Robbe chargers. Special mention should also be made of the stable and safe design, which sets this product clearly apart from those of other manufacturers. The HITEC Universal Balancer Board is indispensable for safe charging of your LiXX batteries. 118300

6-Fach Ladeadapter mit 4 mm Goldkontakt-Stecker zum laden von 1S LiPo-Akkupacks wie z.B. die Eflite Ultra Micro und Kyosho Minium Serie benötigen. HP-LGUM6PADAP

The balancer adapters are designed for the use of LiPo battery packs with other balancer connector systems to use the LiPo-Balancer 5 plus order no. 61562 and LiPo-Balancer 6 plus order no. 66038 or ULTRAMAT 8 order no. 61562.The GRAUPNER LiPo-Balancer 5 plus and LiPo-Balancer 6 plus can now also be used with other LiPo battery packs using the corresponding adapter. For transmitters of remote control systems: 2007 -1. 3065.XH

With the PC-4860S Safe Parallel Adapter, several batteries of the same type can be charged simultaneously via one charger. ISDT chargers for which the connection cables are included are particularly suitable for this purpose.specification:Max input current: 40AMax output current: 30A / portMax balancing current: 2ABalance Cells: 1s ~ 8sConnector: XT60 PC-4860S

MT1752