is a multi-spray with excellent properties. Quick solution of corroded screw connections, bolts and machine parts. Temporary corrosion protection for machined parts as well as moulds etc.Application:
UNI 400 infiltrates and displaces moisture and water and can therefore be used on wet parts or machinery. It is excellent for degreasing preserved profile tubes. It dissolves stubborn dirt and does not attack the paint. It has good penetrating power to loosen seized parts and is silicone-free.ADVANTAGES:
- Rapid rust loosening
- facilitates dismantling
- eliminates squeaking noises
- infiltrates and displaces moisture and water
- binds acids on metal surfaces
- Temperature range from -30°C to +180°C
- Good penetrating power to loosen seized parts
- Dissolves stubborn dirt
- Does not attack paint
Kinematic viscosity at 40°C: 1.8 mm²/s
Density at 20°C: approx. 0.815 g/ml
2.2 Labelling elements 1/2019:
Signal word: Danger
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H317 May cause an allergic skin reaction.
H319 Causes severe eye irritation.
H412 Harmful to aquatic life with long lasting effects.
EUH066 Repeated exposure may cause skin dryness or cracking.
P102 Keep out of the reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P261 Avoid inhalation of aerosol.
P273 Avoid release into the environment.
P280 Wear protective gloves/protective clothing/eye protection.
P302+P352 IF ON SKIN: Wash with plenty of water/soap.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue to rinse.
P308+P313 IF EXPOSED OR IF AFFECTED: Get medical advice/attention.
P410+P412 Protect from sunlight. Do not expose to temperatures above 50 °C/122 °F.
P501 Dispose of contents/container to hazardous or special waste collection point.
Label Information: Contains calcium sulfonate and orange terpenes.
2.3 Other hazards
Narcotic effects may occur. Asphyxiating in high concentrations.
Heating above 50 °C causes pressure rise: risk of bursting and explosion.
Vapours form explosive mixtures with air, heavier than air.
Results of PBT and vPvB assessment: No data available.