Description "ORACOVER 2K-PU-Ziehspachtel 300g"
Description
ORACOLOR® 2K-PU-ZIEHSPACHTEL to be used in combination with the hardener for
Drawing spatula (component 2) in a mixing ratio of 2:1 (spatula:hardener).
This spatula is characterized by excellent adhesion to steel, aluminum, wood, GRP, CFRP, KFK.
The 2-component PU drawing filler impresses with the following features:
It was developed as a spatula for levelling out uneven surfaces. The 2-component PU drawing filler is always supplied with the associated hardener. Filling stations can be ironed over with ORACOVER® and ORATEX® or painted with ORACOLOR®.
To compensate for surface irregularities in the ground, we recommend our ORACOLOR® 2K-PU scraper. The only spatula that is permanently elastic and DOES NOT SHRINK.
Note: Fresh, large depressions or irregularities are compensated with the ORACOLOR 2K PU spatula (No 08445).
ORACOLOR® 2K-PU-ZIEHSPACHTEL to be used in combination with the hardener for
Drawing spatula (component 2) in a mixing ratio of 2:1 (spatula:hardener).
This spatula is characterized by excellent adhesion to steel, aluminum, wood, GRP, CFRP, KFK.
The 2-component PU drawing filler impresses with the following features:
- good filling properties,
- does not shrink,
- is temperature resistant,
- can be easily sanded.
It was developed as a spatula for levelling out uneven surfaces. The 2-component PU drawing filler is always supplied with the associated hardener. Filling stations can be ironed over with ORACOVER® and ORATEX® or painted with ORACOLOR®.
To compensate for surface irregularities in the ground, we recommend our ORACOLOR® 2K-PU scraper. The only spatula that is permanently elastic and DOES NOT SHRINK.
Note: Fresh, large depressions or irregularities are compensated with the ORACOLOR 2K PU spatula (No 08445).
Technical data
Menge.: | 300 g |
---|---|
Besondere Kennzeichnung: | EUH204 |
Gefahrenhinweise: | H315, H411, H317 |
Sicherheitshinweise: | P101, P102, P261, P272, P280, P302, P352, P333, P313, P363, P501 |
Piktogramme: | GHS07 |