Permanently elastic sealing tape of synthetic rubber for fastening all types of vacuum films to the edges of moulds. On one side with removable backing film.

• Good adhesion to a wide range of substrates
• Good UV resistance
• Good formability
• Good chemical resistence to diluted acids and alkalis
• Low resistance to organic solvents
• Easy and accurate to use with little waste and no mess
• Remains flexible throughout its service life

Technical data:

• Dynamic tensile adhesion (N/cm²): 40
• Dynamic shear adhesion (N/cm²): 12
• 90 ° Peel adhesion (N/cm²): 7
• 180 ° Peel adhesion (N/cm²): 8
• Density: 1.7 g/cm³
• Extensibility: approx. 140 %
• Moisture vapour transmission rate (g/m2/24hr/mm): 0.17
• Max. temperature: -40 °C up to +90 °C
• Short term temperature range: 120 °C
• Application temperature range: +5 °C up to +40 °C
• Colour: grey
• Dimensions: 3 x 12 mm x 15 m

Application:
Very well suited for sealing the openings in vacuum bags (film to film). Glues permanently, films can only be removed mechanically.

Good adhesion to GRP, aluminium, steel, wood, other plastics incl. PE.

Tolerances:

• Thickness: ± 10%
• Width: ± 1 mm