Filter
–
TRAXXAS RC-Backpack black/red, 58,5X30X30 CM
€149.99*
Product no.:
9796780
Manufacturer no.:
TRX9916
Based on the pro-quality bags our team uses in the field, the Traxxas backpack protects your gear and gets you to your destination in style. The main compartment is perfect for TRX-4 and other 1/10 scale vehicles with semi-rigid front and rear plates for support and thick padded sidewalls. The backpack features two large zippered compartments on the front and four additional hooded pockets on the side. Protect your valuable investment and travel like a pro with the Traxxas RC backpack.The large main compartment offers ample space for most 1/10 scale Traxxas vehicles with padded sidewalls for extra protection. Zippered front pockets are perfect for tools, spare parts, and other gear. Bottom side pockets are subdivided into eight individual compartments to hold even the largest Power Cell 4s LiPo batteries and the padded top side pockets will accommodate the EZ-Peak® Live Dual charger.The Traxxas backpack is built to the same standard as the trucks it transports. The high quality Nylon fabric is both strong and lightweight with heavy duty reinforced zippers. The durable weather-resistant material repels water and protects against tears and punctures with robust padding. Heavy duty adjustable shoulder straps and a padded back panel position the weight for maximum comfort on long hauls. A reinforced bottom panel also features tough plastic feet to reduce wear and scuffs for years of service.Features:Perfect for TRX-4 and other 1/10 scale vehiclesThick, weather-resistant Nylon constructionHeavy duty zippersPadded adjustable shoulder straps and chest strapBack panel padded for comfortReinforced bottom panel with protective feetAmple StorageLarge padded center compartmentDual front zipper pocketsTwo subdivided battery compartments with room for eight batteriesTwo hooded compartments for and tools, parts, and gearMain compartment size:23? long (585 mm) x 11.8? wide (300 mm) x 11.8? tall (300 mm)** Backpack dimensions are approximate; larger models may fit with tires removed.Accessory part for these models:1/16 E-Revo® VXL1/16 E-Revo®1/16 Slash 4WD1/16 Summit™1/18 LaTrax® Desert Prerunner1/18 LaTrax® Rally1/18 LaTrax® Teton®4-Tec® 2.0 AWD Chassis4-Tec® 2.0 VXL AWD ChassisBandit® VXLBandit®BIGFOOT® No. 1 Officially Licensed ReplicaChevrolet® Corvette® StingrayDrag Slash 1967 Chevrolet® C10 TruckDrag Slash Ford® Mustang® 5.0Factory Five '33 Hot Rod CoupeFactory Five '35 Hot Rod TruckFord® F-150 RaptorFord® Fiesta® ST RallyFord® GTFord® Mustang GT®Hoss® 4X4 VXLJato®LaTrax® Alias® Quad Rotor HelicopterNitro Rustler®Nitro SlashRustler® 4X4 VXLRustler® 4X4Rustler® VXLRustler®Slash 2WD Unassembled KitSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Slash VXLSlashSlayer® Pro 4X4Stampede® 4X4 VXLStampede® 4X4Stampede® VXLStampede®Toyota® GR Supra GT4®TRX-4M™ 1/18 Ford® Bronco®TRX-4M™ 1/18 Land Rover® Defender®TRX-4® 1972 Chevrolet® Blazer® High Trail Edition™TRX-4® 1979 Chevrolet® Blazer®TRX-4® 1979 Ford® Bronco®TRX-4® Chevrolet® K10 High Trail Edition™TRX-4® Equipped with Traxx®TRX-4® Ford® Bronco®TRX-4® Ford® F-150® High Trail Edition™TRX-4® Land Rover® Defender®TRX-4® Sport High Trail Edition™TRX-4® Sport Unassembled KitTRX-4® SportTRX-4® Unassembled Kit TRX9916
TRAXXAS RC duffel bag (without shoulder strap) black/red, 74,5X30X30 CM
€119.99*
Product no.:
9796779
Manufacturer no.:
TRX9917
Based on the pro-quality bags our team uses in the field, the Traxxas duffel bag protects your gear and gets you to your destination in style. The main padded compartment accommodates standard 1/8 and 1/10 scale vehicles and features dual ventilated mesh side pockets. Large zippered compartments on each end are subdivided with ample room for a transmitter, tools, batteries, and other gear. Protect your valuable investment and travel like a pro with the Traxxas RC duffel bag.The large main compartment offers ample space for most 1/8 and 1/10 scale Traxxas vehicles with dual side pockets to stow extra gear. Large end compartments feature adjustable straps to secure a transmitter and charger safely in place. Additional hooded pockets organize batteries, tools, and other gear in separate compartments for easy access.The Traxxas duffel bag is built to the same standard as the trucks it transports. The high quality Nylon fabric is both strong and lightweight with heavy duty reinforced zippers. The durable weather-resistant material repels water and protects against tears and punctures with robust padding on all sides. Carry handles utilize thick Nylon straps with metal loops for the optional 9924 shoulder strap (sold separately). The reinforced bottom panel also features tough plastic foot rails to reduce wear and scuffs for years of service.Features:Holds most 1/8 and 1/10 scale vehiclesThick, weather-resistant Nylon constructionHeavy duty zippersReinforced carry handlesMetal rings for optional shoulder strapProtective foot railsAmple StorageLarge center compartment with dual mesh pocketsDual oversize outer pocketsAdjustable hook and loop straps to secure transmitter and chargerHooded compartments for batteries and tools29.4? long (745 mm) x 11.8? wide (300 mm) x 11.8? tall (300 mm)** Bag dimensions are approximate; larger models may fit with tires removed.Accessory part for these models:1/16 E-Revo® VXL1/16 E-Revo®1/16 Slash 4WD1/16 Summit™1/18 LaTrax® Desert Prerunner1/18 LaTrax® Rally1/18 LaTrax® Teton®4-Tec® 2.0 AWD Chassis4-Tec® 2.0 VXL AWD ChassisBandit® VXLBandit®BIGFOOT® No. 1 Officially Licensed ReplicaChevrolet® Corvette® StingrayDrag Slash 1967 Chevrolet® C10 TruckDrag Slash Ford® Mustang® 5.0Factory Five '33 Hot Rod CoupeFactory Five '35 Hot Rod TruckFord® F-150 RaptorFord® F-150® Raptor R™ 4X4Ford® Fiesta® ST RallyFord® GTFord® Mustang GT®Hoss® 4X4 VXLJato®LaTrax® Alias® Quad Rotor HelicopterNitro Rustler®Nitro SlashRustler® 4X4 VXLRustler® 4X4Rustler® VXLRustler®Slash 2WD Unassembled KitSlash 4X4 UltimateSlash 4X4 VXLSlash 4X4Slash VXLSlashSlayer® Pro 4X4Stampede® 4X4 VXLStampede® 4X4Stampede® VXLStampede®SummitToyota® GR Supra GT4®TRX-4M™ 1/18 Ford® Bronco®TRX-4M™ 1/18 Land Rover® Defender®TRX-4® 1972 Chevrolet® Blazer® High Trail Edition™TRX-4® 1979 Chevrolet® Blazer®TRX-4® 1979 Ford® Bronco®TRX-4® Chevrolet® K10 High Trail Edition™TRX-4® Equipped with Traxx®TRX-4® Ford® Bronco®TRX-4® Ford® F-150® High Trail Edition™TRX-4® Land Rover® Defender®TRX-4® Sport High Trail Edition™TRX-4® Sport Unassembled KitTRX-4® SportTRX-4® Unassembled Kit TRX9917
SWORKZ Bag for oils Medium 20x17x10.5cm
€35.99*
Product no.:
9795510
Manufacturer no.:
SW950012M
Top quality SWORKz bag for transporting all SWORKz oils for shock absorbers and differentials.The interior of the bag is fully padded and has reinforced walls to protect all of the contents inside the bag.The bag is ideally suited for rough use in racing.The medium size fits perfectly with medium 60ml silicone oils from SWORKz.The zippers with SWORKz applications and the typical SWORKz design of the bag will cause a stir. SW950012M
-16%
SWORKZ Hard Case Bag with Intelligent Foam LxWxH: 20x16x6cm
€20.99*
€24.99*
(16.01% saved)
Product no.:
9795509
Manufacturer no.:
SW950014
Top quality SWORKz bag for transporting all accessories that are needed for racing.The inside of the bag has reinforced walls, and an additional mesh in the zipped lidThe bag is ideally suited for rough use in racing.The zippers with SWORKz applications and the typical SWORKz design of the bag will cause a stir.The inside of the SWORKz bag can be individually adjusted and allows various products such as batteries, electric motors and much more to be safely stowed away and transported.The Smart Foam works very simply:The foam insert is pre-cut into many small cubes and you can choose the shape you want by simply removing the cubes. The cubes can also be reinserted as needed to change the shape of the interior again. SW950014
-16%
SWORKZ Bag for oils Large 25x21x13.5cm
€31.99*
€37.99*
(15.79% saved)
Product no.:
9795511
Manufacturer no.:
SW950012L
Top quality SWORKz bag for transporting all SWORKz oils for shock absorbers and differentials.The interior of the bag is fully padded and has reinforced walls to protect all of the contents inside the bag.The bag is ideally suited for rough use in racing.The large size fits perfectly with large 130ml & 150ml silicone oils from SWORKz.The medium size fits perfectly with medium 60ml silicone oils from SWORKz.The zippers with SWORKz applications and the typical SWORKz design of the bag will cause a stir. SW950012L
-15%
SWORKZ Bag for accessories 24x18x8.5cm
€22.99*
€26.99*
(14.82% saved)
Product no.:
9795512
Manufacturer no.:
SW950013
Top quality SWORKz bag for transporting all accessories which you need for racing.The interior of the bag is fully padded and has reinforced walls to protect all of the contents inside the bag.The bag is ideally suited for rough use in racing.Its size is perfect for storing any tool.But engines and their accessories can also be stowed in it. The stake is unlimitedThe zippers with SWORKz applications and the typical SWORKz design of the pockets will cause a stir. SW950013
carrying bag TAMIYA for RC-Cars
€16.99*
Product no.:
9761526
Manufacturer no.:
500908178
Dimensions: about 64x29x36 cm 500908178
-20%
Transport bag Sanwa Multi-Bag
€32.90*
€41.10*
(19.95% saved)
Product no.:
9780282
Manufacturer no.:
SAN107A90356A
SAN107A90356A
ABSIMA LIPO LOADING AND TRANSPORT BAG
€8.95*
Product no.:
9774651
Manufacturer no.:
9000008
Features :Flame retardant fiberglass materialAlso suitable for loadingDimensions (L/W/H) 190 x 80 x 80 mmInternal dimensions : 170 x 70 x 70 mmWeight 68 gScope of delivery :1 pc Absima LiPo loading and transport bag 9000008
ABSIMA UNIVERSAL HARD CASE TRANSMITTER BAG
€29.95*
Product no.:
9770887
Manufacturer no.:
9000002
To protect your remote control not only during transport, but also during storage, Absima presents this Universal Hard Case Transmitter Bag. The big compartment for the remote control offers enough storage space for remote controls of all brands and models. The inlay can be individually adjusted with plucked foam. Two additional compartments in the lid offer sufficient storage space for accessories such as a second receiver or a spare battery. The entire bag is well padded and dirt resistant. The carrying strap offers sufficient grip possibilities.Features: - The "bumper" for your control unit - Universal use for almost all remote control systems - Inlay individually adaptable through "plucked foam - External dimensions (LxWxH) 350 x 250 x 150 mm - Internal dimensions (LxWxH) 320 x 220 x 130 mm - Incl. carrying strap 9000002
ROBITRONIC Car & Tire Bag for 1/8 & 1/10 models
€83.99*
Product no.:
86790
Manufacturer no.:
R14010
With this bag you can take your 1/8 Scale RC car with you anywhere. It offers sufficient storage space for the car as well as for all Your accessories such as the remote control, cables, batteries and much more.FeaturesSpace for e.g. suitable 1/8 scale carsComfortable transport thanks to two comfortable strapsLarge transport box with side compartmentSpezificationsDimensions: 750x450x210mmDimensions (Box):590x390x190mm R14010
ROBITRONIC TRANSPORT BAG FOR 1/8 MODELS
€206.99*
Product no.:
84426
Manufacturer no.:
R14001
One of the most popular transport bags in the world is the 1/8 bag from Robitronic. It can be transported perfectly, whether worn, carried around or pulled over the rollers. In addition, it offers an enormous storage space in your 5 compartments, the upper tool compartment or the 4 side pockets. The unsurpassed overall appearance is further emphasized by the outstanding workmanship. In the upper large main compartment of the bag finds a 1/8 buggy or flat track player playful place. Also all the necessary material such as tools, tires, setup tools, starter box, spare parts, and much more can easily find its place in this small space miracle. The 5 drawers are made of plastic and have a handle to open or close them easily.On the rear side is a generous pocket with Velcro closure where, for example, a setup board, instructions, or other parts can be accommodated.At the top is also a very useful and quickly accessible tool and small parts area. Here you will find 20 rubber loops that provide order and hold screwdrivers and sockets or pliers in place. Furthermore, there are two large boxes of 25 x 5.5 x 9cm (LxHxW) in which small parts can be stored. So the screws is even more fun, just put the bag in the paddock next to you, open the top flap and you have everything you need in front of you - order is half the battle!Thanks to a telescopic handle and the skater wheels you can transport the bag even fully loaded effortlessly from A to B like a trolley. The handle can then be pushed completely into the bag to waste as little space as possible in the car.Technical data:Dimensions (WxHxD)- Complete bag: 550 x 580 x 360mm- Large drawer: 490 x 195 x 350mm- Small drawers: 235 x 120 x 350mm- 20 rubber loops for tools- 2 small boxes: 9 x 5,5 x 25cm- Easy to clean material- Retractable telescopic handle- 2 skate wheels- weight: 8,6kg R14001
ROBITRONIC ERMITTER BAG UNIVERSAL
€30.99*
Product no.:
83116
Manufacturer no.:
R14003
Die Sendertasche ist aus hochwertigem und widerstandsfähigem Material gefertigt. Durch den gepolsterten Nylonstoff ist Ihre Fernbedienung sicher verwahrt und beim Transport geschützt! R14003
TRAXXAS SHOULDER STRAP FOR TRX9917 BLACK
€12.99*
Product no.:
9796781
Manufacturer no.:
TRX9924
Padded Nylon shoulder strap for use with the TRX9917 Traxxas RC duffel bag. TRX9924
CARSON Carrying bag TAMIYA Design
€73.99*
Product no.:
9792833
Manufacturer no.:
500908124
The stylish RC car transport bag in the TAMIYA design swallows everything that racers need on the road and is suitable for all purposes in model making. The large bag is perfectly designed for transporting 1:10 scale RC cars. Two sturdy plastic drawers ensure the safety of models and equipment. The interior can be easily removed completely through the huge front flap with all-round zip, then larger models can also be accommodated in the TAMIYA RC car transport bag.External dimensionsLength about 52 cmWidth about 34 cmHeight about 35 cmInternal dimensions of the drawersLength approx. 48 cmWidth approx. 29.5 cmHeight approx. 14.5 cm 500908124
ROBITRONIC Transport BAG für 1/10 Models
€124.99*
Product no.:
9784348
Manufacturer no.:
R14002
This 1/10 bag from Robitronic has the same genes as its big brother the 1/8 bag. It is THE solution for all those who think a 1/8 bag is too big or who need a second bag next to the 1/8 bag. This bag can be carried perfectly, whether worn, carried around or pulled over the wheels. In addition, it offers enormous storage space in its 5 compartments, the upper tool compartment or the 2 side pockets. Thanks to the perfect mix of materials, it looks great and is also easy to clean. The unsurpassed overall appearance is further underlined by the outstanding workmanship. The bag's large upper main compartment easily accommodates a 1/10 flat track (190 of 200mm width). All the necessary material such as tools, tyres, setup tools, starter box, spare parts, etc. can also easily find a place in this small space miracle. The 5 drawers are made of plastic and have a catch for easy opening and closing.On the rear side there is a generous pocket with Velcro fastening where, for example, a setup board, instructions or other parts can be stored.On the top, there is also a very useful and quickly accessible tool. Here you will find rubber loops that keep screwdrivers, sockets and pliers in place. This makes wrenching even more fun, simply place the bag next to you in the paddock or at home, open the top flap and you have everything you need right in front of you ... - Tidiness is half the battle!Thanks to a telescopic handle and two wheels, the bag can be transported effortlessly from A to B like a trolley, even when fully packed. The handle can then be pushed completely into the bag to waste as little space as possible in the car.Technical data:Dimensions (WxHxD)- Complete bag: 550 x 500 x 260mm- Large drawer: 510 x 135 x 240mm- Small drawers: 250 x 130 x 240mm- 14 pcs. Rubber loops for tools- Easy to clean material- Retractable telescopic handle- 2 castors- weight: 4,6kg R14002
ROBITRONIC Dirtbag carrying bag for 1/5 and 1/6 Big Scale
€32.99*
Product no.:
9781188
Manufacturer no.:
R14016
After a great day on the race track, off-road or in the car park, the model car is marked by the strains of the day. Depending on the location, it is full of dirt, mud, dust, grass or similar and somehow it has to go home. Usually with the car, but then it looks like the s... But Robitronic offers the solution with the dirtbags for model cars, the vehicle is simply placed completely in the bag and this is closed with a simple pull on a cord as far as possible with your model. Now the bag can be stored clean and dry in the boot or on the back seat with the practical carrying handles.The Dirtbag is made of a synthetic material and can be easily washed out with water or soapy water if necessary. The material used also prevents or makes it difficult for oils and fuel to penetrate.The bag encloses the complete vehicle including the tyres, an elastic edge adapts optimally to the model and encloses the model car tightly. The bag can also be further secured with a drawstring at the edge.A carrying strap on the left and right can be connected or disconnected with a Velcro fastener on the handle, thus ensuring easy carrying or transporting of the bag.Due to the dimensions, the Dirtbags are also extremely practical for other applications such as transporting tyres!Technical data:Dimensions (WxLxH): 54cm x 88cm x 23cm R14016
ROBITRONIC Dirtbag carrying bag for 1/8 buggy
€21.99*
Product no.:
9781187
Manufacturer no.:
R14013
After a great day on the race track, off-road or in the car park, the model car is marked by the strains of the day. Depending on the location, it is full of dirt, mud, dust, grass or similar and somehow it has to go home. Usually with the car, but then it looks like the s... But Robitronic offers the solution with the dirtbags for model cars, the vehicle is simply placed completely in the bag and this is closed with a simple pull on a cord as far as possible with your model. Now the bag can be stored clean and dry in the boot or on the back seat with the practical carrying handles.The Dirtbag is made of a synthetic material and can be easily washed out with water or soapy water if necessary. The material used also prevents or makes it difficult for oils and fuel to penetrate.The bag encloses the complete vehicle including the tyres, an elastic edge adapts optimally to the model and encloses the model car tightly. The bag can also be further secured with a drawstring at the edge.A carrying strap on the left and right can be connected or disconnected with a Velcro fastener on the handle, thus ensuring easy carrying or transporting of the bag.Due to the dimensions, the Dirtbags are also extremely practical for other applications such as transporting tyres!Technical data:Dimensions (WxLxH): 33cm x 57cm x 15cm R14013
ROBITRONIC Dirtbag Carrying Bag for Crawler
€19.99*
Product no.:
9781186
Manufacturer no.:
R14015
After a great day on the race track, off-road or in the car park, the model car is marked by the strains of the day. Depending on the location, it is full of dirt, mud, dust, grass or similar and somehow it has to go home. Usually with the car, but then it will look like the s... But Robitronic offers the solution with the dirtbags for model cars, the vehicle is simply placed completely in the bag and this is closed with a simple pull on a cord as far as possible with your model. Now the bag can be stored clean and dry in the boot or on the back seat with the practical carrying handles.The Dirtbag is made of a synthetic material and can be easily washed out with water or soapy water if necessary. The material used also prevents or makes it difficult for oils and fuel to penetrate.The bag encloses the complete vehicle including the tyres, an elastic edge adapts optimally to the model and encloses the model car tightly. The bag can also be further secured with a drawstring at the edge.A carrying strap on the left and right can be connected or disconnected with a Velcro fastener on the handle, thus ensuring easy carrying or transporting of the bag.Due to the dimensions, the Dirtbags are also extremely practical for other applications such as transporting tyres!Technical data:Dimensions (WxLxH): 29cm x 47cm x 14cm R14015
ABSIMA CARRYCOT FOR 1:8 BUGGY & CARRIER
€45.95*
Product no.:
9774650
Manufacturer no.:
9000004
Features :Your "big one" also fits in thereDimensions (Lx W x H) 600 x 400 x 290 mmInternal dimensions (L x W x H) 540 x 390 x 250 mmMaterial Synthetic fabricScope of delivery :1 pc Car transport - bag 9000004
SWORKZ RACING JUMBO TROLLEY 2.0
€164.99*
Product no.:
9771473
Manufacturer no.:
SW-950009A
The brand new SWORKz Jumbo Trolley is the most easy and light weight RC bag for air travel or any rc outings. This Jumbo Trolley is about the size of a 30 inch suitcase but only weighs 3.8kg. The internal volume is around 100L with its plastic bottom insert.It is designed for RC racing with a big handle bar that can be adjusted to a 2 step length. When you check in, there is also a zipper that can cover the handle bar. We know RC equipment is always not light, so there is a sport string with clip knot. Its 75mm high quality wheels with ball bearings hidden at the bottom provides the user the ease to move it around.All the entry covers have strong zippers and lock holes. You can also put your personal documents in the top pocket that has a strong zipper cover. This Jumbo Trolley is made from tannic materials, so it can protect your rc equipment from dust and water. SW-950009A
ROBITRONIC DIRTBAG FOR 1/8 MONSTER & TRUGGY
€24.99*
Product no.:
9750328
Manufacturer no.:
R14014
After a great day on the racetrack, off-road or in the parking lot, the model car is marked by the strains of the day. Depending on the place of use full of dirt, mud, dust, grass or similar and somehow he has to go home. Mostly with the car but then this looks like the S... But Robitronic offers the solution with the Dirtbags for model cars, the vehicle is simply put in the complete bag and closed with a simple pull on a cord as far as possible with your model. Now the bag can be stowed neatly and dryly in the boot or on the back seat with the practical carrying handles.The dirtbag is made of a synthetic material and can be easily washed out with water or soapsuds. The material used also prevents or complicates the penetration of oils and fuel.The bag encloses the complete vehicle including the tires, an elastic edge adapts itself to the model and wraps the model car tightly. The pocket can then be secured further by means of a drawstring in the edge area. A strap on the left and right side can be connected or disconnected with a Velcro fastener on the handle, which makes it easy to carry or transport the bag.Due to their dimensions, the Dirtbags are also extremely practical for other applications such as transporting tyres!Technical data:Dimensions (WxLxH): 44cm x 57cm x 16cm R14014
CARSON TRANSPORT BAG TAMIYA FIGHTER BUGGY
€37.99*
Product no.:
9716466
Manufacturer no.:
500908133
The CARSON-MODEL SPORT fighter bag in TAMIYA World ChampionTeam design.Dimensions W/H/D: approx. 64/29/36 cm 500908133