Hobby Plus RC EVO Crawler "Power Wagon V2" 1/18 orange 2-Gear RTR
Product number:
9798176
Manufacturer number:
AB1810109
€159.95*
Not in stock. Available in approx. 7 to 21 business days.
- 1x Mini EVO Crawler
- 1x 2.4GHz radio system
- 1x LiPo battery 7.4V 600mAh
- 1x USB charging cable
- 1x Sticker sheet
- 1x Manual DE/EN/FR
- 1x Mini tool set
Needed to Complete (not included):
- 4x AAA Batteries for the radio
| Engine Type: | Electric |
|---|---|
| Drivetrain: | 4WD |
| Scale: | 1:18 |
| Use: | OFFROAD |
| Länge (mm).: | 250 |
| Breite (mm).: | 125 |
| Rec. engine: | included |
| Version: | RTR - READY TO RUN |
| Driving Experience: | Beginners |
| Build Skill: | Beginners |
It doesn't need much space and the "playground" is made quickly. Simply throw a few cushions on the floor or build a course at your desk at lunchtime and the fun can begin! Thanks to the proportional radio remote control, the finest driving maneuvers are possible to overcome even the most complicated-looking obstacles.
The "V2 Evolution Upgrade" raises this little powerhouse to a level never seen before in its class!
Highlights
New EVO Features and Functions:
Features:
The "V2 Evolution Upgrade" raises this little powerhouse to a level never seen before in its class!
Highlights
New EVO Features and Functions:
- New* oversized 130 "Crawler Spec" brushed motor (100T)
- New* developed 2-speed steel gear shift (switchable on radio CH3)
- New extreme portal axles with steel gears for even more ground clearance
- New* motor mount (even for bigger motors like 180 & 240 size)
- New* reinforced drive shafts front & rear
- New* LCG-optimized chassis layout (Low Center of Gravity)
- 2.4GHz radio system
- Vehicle lighting operated from the transmitter (CH4)
- Oversize 1.2" AT wheels with internal beadlock system
- 1kg steering servo with panhard bar
- PPX4 water-resistant electronics
- Metal chassis frame
- Painted 1.2mm Lexan body
- Tight turning circle of 80cm
- Driving time of up to 45 minutes
- Steering angle of up to 45°
- Maximum ground clearance thanks to portal axels and 1.2" wheels
- Portal axles front and rear for increased ground clearance
- LED lighting front and rear. Operated via channel 4 on the transmitter
- Newly developed and reinforced front and rear drive shafts
- Specially developed portal axle with new drive ratio. This ensures a butter-soft response at low speeds and even more torque. The new axle also achieves a steering angle of up to 45°. The gearbox in the axles is made of tool steel.
- Newly developed 2-speed high-performance gearbox - 1st gear ratio: 98:1 / 2nd gear ratio: 24.5:1 switchable via CH3 on the remote control. Gears made of tool steel is also used here.
- The motor mount is compatible with brushed and brushless motors up to a size of 240
- Super-soft 1.2" "All Terrain" wheels with internal bead lock design
- Simple, balanced and easily accessible "LCG" chassis layout with high-performance drivetrain
Features:
- Scale: 1:18
- 4WD all-wheel drive
- 2.4GHz radio system
- "High Torque" 2-speed steel gears, 1st gear ratio: 98:1 / 2nd gear ratio: 24.5:1(CH4)
- 100T / 130size brushed motor
- Differentials fully locked (front & rear)
- Telescopic UJ cardan shafts
- Metal chassis frame
- Drag/Mountain brake (prevents rolling on hills)
- Digital proportional control for sensitive driving maneuvers
- LED lighting (CH4)
- Scale body with many attachment parts
- 1.2" bead lock wheels with super soft AT tires
- Waterproof 1kg mini steering servo
- 2-in-1 speed controller/receiver unit
- Driving time: approx. 45 minutes
- Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50A
- Remote control: 2.4GHz, 4-channel
- Steering servo: 1kg actuating force, waterproof
- Motor: 100T - 130 oversize
- Newly developed 2-speed gears
- Steel drive and portal axle gears
- Gear ratio: 1st gear: 98:1 / 2nd gear: 24.5:1
- Battery: LiPo 7.4V/2S 600mAh
- Battery connector system: Molex 2-pin
- Wheelbase: 160mm
- Ground clearance: 37mm
- Track width: 110mm
- Length: 250mm
- Width: 125mm
- Height: 135mm
- Weight: 390g (incl. drive battery)
- Wheels: 19.5x58mm
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
ABSIMA GmbH
Gibitzenhofstraße 127A
90443 NÜRNBERG
DEUTSCHLAND
Tel: +49/911 650841 34
[email protected]