ABSIMA ATC 3.4BL HOT SHOT BRUSHLESS TOURING CAR 4WD 1/10 RTR

Product number: 9770296
Manufacturer number: 12241
GTIN/EAN: 4250650937591

€239.95*

% €259.95* (7.69% saved)

Only a few left in stock, ready for shipment within 1 working day. Delivery time 1-3 working days.

Description "ABSIMA ATC 3.4BL HOT SHOT BRUSHLESS TOURING CAR 4WD 1/10 RTR"
A myth doesn't follow a line, a myth breaks rules. The ATC BL in the 3rd generation has grown into a super sports car. The combination of sportiness, dynamics and efficiency makes the ATC3.4 special and an exceptional performer.

With its 3S Ready heart, supported by the fiber-reinforced lightweight chassis, the ATC3.4 delivers track performance with addictive potential.

"E-Mobility-Power" made by Absima - because we always can !

Highlights ATC3.4 Brushless Version :
-+ 60 KM/H fast
-Waterproof speed controller - 3S Lipo battery ready for use
all-wheel drive (4 WD)

Equipment :
-Fully assembled and equipped
-All-wheel drive
-Incl. 2.4 GHz remote control
-Waterproof Brushless Regulator with T-Plug Battery Plug
Water-resistant and powerful steering servo with 4 kg actuating force
-3300 KV Brushless motor size 540
-Fully encapsulated main drive - prevents penetration of small stones or other foreign bodies
-Aluminium cardan drive with steel holders
The vehicle is completely ball bearing mounted and therefore very smooth-running and durable.
Two built-in cone differentials transmit torque optimally and compensate for speed differences, e.g. when cornering
-Differential steel outputs
-12mm aluminium oil pressure shock absorber adjustable via knurled screw
-Aluminium Motor bracket
-steel shafts on the front axle
-Track rods adjustable via right/left-hand thread
-Chassis stiffeners made of aluminium
-7mm Damper bridges V/H
-Extremely robust body ready designed
-The reinforced plastic parts are on the one hand very resistant and on the other hand provide the necessary degree of deformation to withstand many an "accident" without damage.
-metal - spur gear and motor pinion

Technical data :
-Dimensions ( L/W/H) 450 x 190 x 125 mm
-Weight 1425 g
-Wheelbase 260 mm
-Ground clearance 20 mm
-track front 170 mm
-track rear 170 mm
-Tyres : Ø ± 65 mm / width 27 mm front - 27 mm rear
-Chassis ATC
-Viscosity damper oil : 300 v/h
-spring strength damper : medium
-Damper length : front 62 mm / rear 62 mm
-Viscosity Differential oil : front 5.000 / rear 5.000
-Internal gear ratio : bevel pinion 13T / ring gear 38T
-engine ratio : spur gear 64T / motor pinion 29T ( module 0.6 )

Technical data speed controller Thrust :
- Waterproof 50A controller incl. fan
- 3S LiPo ready for use
- T-Plug battery plug
- Motor connection via 3.5mm gold contact plugs and sockets
- Immediately ready to drive
- Easy calibration
- Sensorless
- NiMH 4 - 9 cells & LiPo 2 - 3 cells Operation
- 95° overheating protection
- Short-term load 300A
- BEC 6V / 3A
- Operating voltage 4.8 - 11.1V
-Motor timing 18.75 deg.
-Motor limit @2S LiPo / 6 cells NiMH = Onroad < 8T / Offroad < 11T and motor limit @3S LiPo / 9 cells NiMH = Onroad < 11T / Offroad < 14T
-The following functions can be programmed directly via the integrated Set Up button:
+ Brake power 25% - 100%
+ Neutral brake 0% - 40%
+ Driving mode Forward - Brake - Reverse or Forward - Brake
+ Start Punch from soft to aggressive
+ Voltage switch-off from without up to 3.4V ( ex works LiPo switch-off 3.0V/cell )
-Dimensions (L/W/H) : 48.5 x 38 x 32 mm
-Weight incl. cable : 90 g

Technical Data Motor Thrust :
-3300 KV
-27,400 rpm @ 7.4 volts
-4 poles
-Operating voltage 4.8 - 11.1V
-Size 540
-Housing length : 52.0 mm
-Housing Ø : 36.0 mm
-Wavelength : 14.5 mm
-shaft diameter : 3,17 mm
-Weight : 200 g

Technical Data Servo S40PH :
-Size - Car Standard
-Actuating force 4,0 Kg @ 4,8V
-Actuating time 0.16 Sec / 60° @ 4.8V
-Gearbox - Nylon
-gear rim - 25 teeth
-connector system - JR
-Dimensions (LxWxHxD) 40.2 mm x 20.4 mm x 39.8 mm
-hole spacing - 49.7 mm
-voltage - 4.8 - 6.6V
-Weight - 43 g
-1 Ball bearing

Technical data remote control :
-2 channel transmitter
-3 Channel Mini Receiver
-reverse function
-Dual Rate and Trim adjustable
-Battery compartment for 4 Mignon AA cells ( not included )

Scope of delivery :
-1 St. Touring Car "ATC 3.4" BL RTR
-2.4 GHz Remote control CR2SV2
-Instruction

Required accessories :
-Battery
-charger
-4 Mignon cells AA for remote control

Technical data
Engine Type: Brushless Elektro
Drivetrain: 4WD
Scale: 1:10
Version: RTR - READY TO RUN
Driving Experience: Fortgeschritten
Build Skill: Advanced
The company ABSIMA was founded in September 2011 in Nürnberg, Germany. As exclusive dealer for Team C Racing in Europe, Absima is one of the leaders in the RC Car industry worldwide. Absima offers a large selection of Cars in 1:10 and 1:8 scale, as well as thousands of quality spare and tuning parts, RC transmitters, servos, speed controllers, electric and glow motors, battery packs, and RC boats. From Ready to Run beginner kits to competition RC models, Absima has you covered!