The MDM-1 FOX is a two-seater aerobatics legend on the sailor's sky, in the man-bearing as well as in the model building sector. There are good reasons for this, because the machine was developed for uncompromising aerobatics and offers a lot of possibilities for expansion (EDF or turbine drive). The potential of FOX is far-reaching!The in the form varnished full-Gfk kit offers all conditions for this and has received numerous CfK reinforcements tested and tested by us.We have deliberately chosen the 1:4 scale in order to provide you with a compact, thoroughbred aerobatic glider with the flight characteristics of a large model. This is why we have deliberately chosen a 4-leaf wing to give you the possibility to warp the profile and adjust it to the flight conditions, as well as to increase the manoeuvrability around the longitudinal axis in aerobatics.The surface mating consists of a 18x1mm aluminium tube with an internal solid carbon fibre rod. The supplied parts of the cockpit even allow a model-like disassembly at your own discretion.The flight characteristics can be classified as extremely good-natured. The FOX flies on rails in every situation, even in aerobatics it reacts agile and dynamic.For landing with little headwind, the butterfly position can be used as a brake before the 100mm main wheel is mounted.The kit contains all small parts necessary for the construction, such as linkage, fork and ball heads, rudder horns, rope linkages, screws, wheels, etc.If you are afraid to build such a model as the MDM-1 FOX in ARF, you should take a closer look at the PNP version. After just a few hours of final assembly, it is ready to fly.Diese Version des FOX ist weiß lackiert. Die gezeigten Bilder der lackierten Version dienen nur als Anschauung.Merkmale:Wing and tailplane in GFK shell construction with CFRP reinforcementsGRP fuselage with CfK reinforcementsmodel finished painted in the mouldWing can be plugged in by means of aluminium CFK rodailerons, flaps and elevator ailerons as elastic flaps, rudder ailerons as concave throatWing profile: HQ/W 2,5/11Elevator profile: NACA 0010 21105

The MDM-1 FOX is a two-seat aerobatic legend in the glider sky, in the man-carrying, as well as in the model construction area. This has good reasons, because the machine was developed for uncompromising aerobatics and offers many expansion possibilities (EDF or turbine drive). The potential of the FOX is far reaching!The mold-painted full-Gfk kit offers all the prerequisites for this and has received numerous reinforcements made of CfK that we have tried and tested.We have deliberately chosen a scale of 1:4 to give you a compact, thoroughbred aerobatic glider with the flight characteristics of a large model. Therefore we also deliberately chose a 4 flap wing to give you the possibility to warp the airfoil accordingly and adapt it to the flight conditions, as well as to increase the maneuverability around the longitudinal axis in aerobatics.The wing stub is made of 18x1mm aluminum tube with solid CfK rod inside. The included parts of the cockpit even allow for a prototype-like extension at your own discretion.The flight characteristics can be classified as extremely good-natured. The FOX flies like on rails in every situation, even in aerobatics it reacts agilely and dynamically.For landing in light headwinds, the butterfly position can be used as a brake before touching down on the 100mm main wheel.The kit contains all the small parts necessary for building, such as linkages, clevis and ball heads, rudder horns, cable linkage, screws, wheels, etc.Those who are afraid of building such a model as the MDM-1 FOX in ARF should take a closer look at the PNP version. Because this one is ready to fly after just a few hours of final assembly.Features:- Wing and tailplane in GRP shell construction with CFRP reinforcements.- GRP glider fuselage with CfK reinforcements (closed nose)- Model ready painted in the mold- Wing pluggable by means of aluminum CFRP round rod- Ailerons, flaps and elevator as elastic flaps, rudder as cove- Wing profile: HQ/W 2.5/11- Elevator profile: NACA 0010RC Functions:- Rudder- Elevator- Aileron- Flaps 2660

Like the original, the well-known two-seater school and performance glider, our model of the SZD-54 has the necessary characteristics of a training machine, but it also satisfies the increased demands placed on an aerobatic glider.For the advanced beginner, a low basic speed and a high profiling have a positive effect on the behavior of the model during training flights - the extremely stable wings, the full-gas strength and a climbing angle under full load of approx. 80 degrees make the SZD-54 an aerobatic performance glider that will appeal to even experienced pilots.The SZD-54 stands out from many EPO foam models of this class due to these extraordinary characteristics, combined with a wingspan of more than 2.1 meters and an elegant, model-inspired lines of the trunk and narrow wings.The ARF model includes a powerful brushless motor and a Hobbywing® Skywalker BL controller. 3014