Filter
–
–
–
Robbe Modellsport ASW 15b KIT w/o electronic electric glider plane
€129.99*
Product no.:
9774729
Manufacturer no.:
3404
New version 2024 with the following improvementsnew servos with metal gears (PNP)flaps installed as standard (PNP)improved foam quality, with smoother surfaceredesigned, more true-to-scale cockpitBall joints for rudder linkagesredesigned servo covers in the wingServo cable duct and reinforcement profile in the wing covered with adhesive tape (white)Painted canopy frameASW 15b is a semi-scale model, with good-natured and powerful flight characteristics. This makes the model suitable for those who want to switch from 2-axis to 3-axis models, as well as for experienced model pilots who want to enjoy flying. By upgrading to flaps (optional: # 34020009) the range of use can be extended. Extended thermal flights, rapid descents in butterfly configuration and subsequent accurate spot landings are thus even easier. The powerful drive motor helps the model to reach altitude quickly even without updrafts. The robust model, made of EPO foam, is largely prefabricated and requires little time for final assembly. The tailplane and the wing have quick-release latches, which allow the assembly and disassembly of the model quickly. 3404
Robbe Modellsport ASW 15b PNP electric glider plane
€229.99*
Product no.:
9774727
Manufacturer no.:
3402
New version 2024 with the following improvementsnew servos with metal gears (PNP)flaps installed as standard (PNP)improved foam quality, with smoother surfaceredesigned, more true-to-scale cockpitBall joints for rudder linkagesredesigned servo covers in the wingServo cable duct and reinforcement profile in the wing covered with adhesive tape (white)Painted canopy frameASW 15b is a semi-scale model, with good-natured and powerful flight characteristics. This makes the model suitable for those who want to switch from 2-axis to 3-axis models, as well as for experienced model pilots who want to enjoy flying. By upgrading to flaps (optional: # 34020009) the range of use can be extended. Extended thermal flights, rapid descents in butterfly configuration and subsequent accurate spot landings are thus even easier. The powerful drive motor helps the model to reach altitude quickly even without updrafts. The robust model, made of EPO foam, is largely prefabricated and requires little time for final assembly. The tailplane and the wing have quick-release latches, which allow the assembly and disassembly of the model quickly. 3402
Robbe Modellsport Scirocco XS 3.25m ARF (lime) Full-GFRP High performance glider with 4 flap wings
€999.99*
Product no.:
9791743
Manufacturer no.:
2674
The new Scirocco "XS" is the further downsized and enhanced version of our successful Scirocco "L" and "S" models. At your request, we have developed an even more compact version of our Scirocco. The Scirocco XS has a newly developed fuselage, which has even more strength in the rear due to its oval shape. The wing geometry has been optimized in the outer area for the smaller wingspan. With its 3.25m wingspan, it is even more compact and significantly more maneuverable, making it ideal for flying on slopes in alpine regions. Just as well, however, on the flat or in dynamic aerobatics, the Scirocco XS shows its full temperament. The Scirocco XS is a high performance glider model in modern GRP/CFRP shell construction with very high strength. The H-shaped main spar in sandwich construction made of Airex as support material with laminated carbon fiber fabric has been significantly reinforced. Suitable for the hobby pilot looking for an all-round glider with emphasis on maneuverability, aerobatics/slope. The elaborate shapely design allows as usual excellent attitude recognition. The wing joins from the center section to the outer surfaces are force-fitted and cleanly by CFRP square spar. The model is available in two versions (ARF/PNP) and is largely pre-assembled in the PNP version. The Ro-Power Torque 4356 motor, spinner, Aeronaut propeller and servos including wiring are pre-installed in the PNP version, so that the construction effort is reduced to a minimum. In the ARF version, you have the option to use individual RC components as you see fit. Features: compact wingspan of 3.25m 3-part wing with new geometry at edge arches new oval fuselage shape in the tail strengthened sandwich CfK/Airex spar significantly higher maneuverability continuous ailerons/flaps (no web anymore) installation of black interchangeable frames for the 6-pin connectors provided in the form (already installed in PNP) formed WK linkage covers separating groove for Multilock system in form 2674
Robbe Modellsport Sapphire ARF 2,8m Styro/glasf./Abachi wing
€489.99*
Product no.:
9781090
Manufacturer no.:
2677
The SAPPHIRE is the new thermal and all-round glider at Robbe Modellsport. The V-tail increases its maneuverability when thermal circling. The PNP version has servos already installed, electrical connector and original multilocks as wing locks.The flight characteristics can be described as very good-natured. The SAPPHIRE can be flown as a slow thermal glider or as an all-rounder.The ready-covered wings are constructed of styro core, fiberglass plies, abachi planking and a carbon fiber reinforced spar. The ratio of weight and strength has been optimally achieved.The SAPPHIRE is suitable for advanced model pilots.Features:two-part, ready Oracovered Styro/GfK/Abachi surface with CfK connectioncontinuous sandwich spar (carbon-pine-carbon) for maximum bending stiffnessbuilt-in digital Robbe servos FS-277 with ball bearings and metal gearbox (PNP version only)ready-made wiring of all servos with MPX 6-pin connectors between wing and fuselage (PNP version only)finished rudder flaps with mounted rudder hornspainted GRP fuselage with built-in wooden formers and CfK reinforcementspowerful Ro-Power Torque 3526-870 K/V outrunner, optimized for 4S (PNP version only)large canopy for easy battery changeready hinged rudder flapsprefabricated rudder linkages with linkage parts from German productionpre-cut servo well and linkage coversanodized 38mm aluminum spinner with straight center section (PNP version only)high-strength carbon fiber airscrew 13x7" (PNP version only)modern, highly visible design 2677
Robbe Modellsport Slider QE High Performance 4-Flap Wing Electric Glider
€279.99*
Product no.:
9784580
Manufacturer no.:
2686
"SLIDER QE" is a high performance electric flight model in revolutionary plywood/balsa construction with a 4 flap wing. This construction method enables extraordinary strength in combination with low weight and represents the link to the full GRP/CFRP shell construction. The model has outstanding all-round flight characteristics and, thanks to the innovative construction, is also convincing in terms of flight dynamics. By using the flaps, the range of use can be individually shifted, either towards thermals, or more towards flight dynamics. In addition, the butterfly configuration enables steep approaches and precise landings. The model has removable outer surfaces for better transportability. All servo cable connections are made automatically with plugs in the root ribs or spring-loaded contacts between fuselage and wing. The pendulum elevator is ball bearing mounted for optimum precision.The extensive kit with many parts is made of carefully selected wood and includes all necessary wooden parts as well as small material such as wing plugs, GRP rudder horns, hinges etc. Assembly is quick and easy thanks to many building aids such as auxiliary frames for the fuselage and wing, but requires experience in working with more complex wooden kits.Extensive illustrated building instructions and a 1:1 construction plan are also included.The model is completely developed and manufactured in Austria. 2686
Robbe Modellsport SCIROCCO XL 4,5M ARF (RED ) FULL-GRP
€1,299.99*
Product no.:
9780898
Manufacturer no.:
2672
The new Scirocco "XL" is the enlarged and further developed version of our successful Scirocco "L" model. At your request, we have developed here a larger version of our Scirocco. With its 4.5m wingspan, it is much more suitable for thermals than its predecessors. The Scirocco XL is a high performance glider model in modern GRP/CFRP shell construction with very high strength. The H-shaped main spar in sandwich construction made of Airex as support material with laminated carbon fiber fabric has been significantly reinforced. Suitable for the hobby pilot who is looking for an all-round glider with a focus on thermal flight, but still does not want to miss out on light aerobatics like rolls, loops, turns, etc. The elaborate shapely design allows as usual excellent attitude recognition. The wing connection from the center section to the outer surfaces is force-fitted and neatly done by CFRP square spar. The model is available in two versions (ARF/PNP) and is largely pre-assembled in the PNP version. The Ro-Power Torque 4356 motor, spinner, Aeronaut propeller and the servos including wiring are pre-installed in the PNP version, so that the construction effort is reduced to a minimum. In the ARF version, you have the option to use individual RC components as you see fit. Features: large wingspan of 4.5m 3-piece wing solid sandwich CfK/Airex spar significantly increased thermal characteristics continuous ailerons/flaps (no web anymore) Installation of black interchangeable frames for the 6-pin connectors provided in mold (already installed in PNP) Molded WK linkage covers separating groove for Multilock system in form 2672
Robbe Modellsport SCIROCCO L 4,0M ARF (Gelb) FULL-GRP HIGH PERFORMANCE GLIDER W. 4-FLAP WING
€1,099.99*
Product no.:
9780887
Manufacturer no.:
2670
High performance,- F5J model in modern GFK/.CFRP shell construction. The new Scirocco "L" is the further developed version of our successful Scirocco model.The Scirocco L is a high performance F5J model in modern GRP/CFRP shell construction with appropriate strength. Due to the dynamic flight characteristics, the model is suitable for almost any application. Whether in weak thermals or stronger winds, "SCIROCCO" always shows its good-natured and easily controllable side. The hand launch of the 4.0m model is no problem thanks to the strong drive and the low basic speed and can be performed safely by the pilot alone.But also during faster and tighter aerobatics the Scirocco L unfolds its true temperament and masters the figures. Despite its electric design, it is also being used more and more often on slopes. The elaborate shapely design allows excellent attitude recognition. The wing connection from the center section to the outer surfaces is force-fitted and neatly done by CFRP square spar.The model is available in two versions (ARF/PNP) and is largely pre-assembled in the PNP version. The motor, servos and wiring are pre-installed in the PNP version, reducing construction time to a minimum. In the ARF version, you have the option to use individual RC components as you see fit.Features:compact wingspan of 4.0m3-part winghigher maneuverabilitycontinuous ailerons/flaps (no more bridge)Installation of black interchangeable frames for the 6pin connectors provided in mold (already installed in PNP)formed flap linkage coversseparating groove for Multilock system in form 2670
Robbe Modellsport SCIROCCO S 3,75M ARF (Petrol) FULL-GRP HIGH PERFORMANCE GLIDER WITH 4 FLAP WINGS
€1,099.99*
Product no.:
9780880
Manufacturer no.:
2668
The new Scirocco "S" is the slightly smaller and further developed version of our successful Scirocco model.With its 3.75m wingspan it is a bit more compact and maneuverable, but is in no way inferior to its big brother. The Scirocco S is a high performance F5J model in modern GRP/CFRP shell construction with appropriate strength. Due to the dynamic flight characteristics, the model is suitable for almost any application. Whether in weak thermals or stronger winds, "SCIROCCO" always shows its good-natured and easily controllable side. The hand launch of the 3.75m model is no problem thanks to the low basic speed and can be performed safely by the pilot alone.But also during faster and tighter aerobatics the Scirocco S unfolds its true temperament and masters the figures.Despite its electric design, it is also being used more and more often on slopes.The elaborate shapely design allows excellent attitude recognition. The wing connection from the center section to the outer surfaces is force-fitted and neatly done by CFRP square spar.The model is available in two versions (ARF/PNP) and is largely pre-assembled in the PNP version. The motor, servos and wiring are pre-installed, reducing the build time to a minimum. In the ARF version, you have the option to use individual RC components as you see fit.Features:more compact wingspanhigher maneuverabilitycontinuous ailerons/flaps (no more bar)Installation of black interchangeable frames for the 6-pin connectors provided in moldseparation groove for multilock system in mold 2668
Robbe Modellsport SCIROCCO S 3,75M PNP FULL-GRP HIGH PERFORMANCE GLIDER WITH 4 FLAP WING
€1,599.99*
Product no.:
9780886
Manufacturer no.:
2669
The new Scirocco "S" is the slightly smaller and further developed version of our successful Scirocco model.With its 3.75m wingspan it is a bit more compact and maneuverable, but is in no way inferior to its big brother. The Scirocco S is a high performance F5J model in modern GRP/CFRP shell construction with appropriate strength. Due to the dynamic flight characteristics, the model is suitable for almost any application. Whether in weak thermals or stronger winds, "SCIROCCO" always shows its good-natured and easily controllable side. The hand launch of the 3.75m model is no problem thanks to the low basic speed and can be performed safely by the pilot alone.But also during faster and tighter aerobatics the Scirocco S unfolds its true temperament and masters the figures.Despite its electric design, it is also being used more and more often on slopes.The elaborate shapely design allows excellent attitude recognition. The wing connection from the center section to the outer surfaces is force-fitted and neatly done by CFRP square spar.The model is available in two versions (ARF/PNP) and is largely pre-assembled in the PNP version. The motor, servos and wiring are pre-installed, reducing the build time to a minimum. In the ARF version, you have the option to use individual RC components as you see fit.Features:more compact wingspanhigher maneuverabilitycontinuous ailerons/flaps (no more bar)Installation of black interchangeable frames for the 6-pin connectors provided in moldseparation groove for multilock system in mold 2669
Robbe Modellsport MDM-1 FOX 3,5M glider PNP full GFRP/CFRP painted orange aerobatic glider
€1,799.99*
Product no.:
9777661
Manufacturer no.:
2661
The MDM-1 FOX is a two-seat aerobatic legend in the glider sky, in the man-carrying, as well as in the model construction area. This has good reasons, because the machine was developed for uncompromising aerobatics and offers many expansion possibilities (EDF or turbine drive). The potential of the FOX is far reaching!The mold-painted full-Gfk kit offers all the prerequisites for this and has received numerous reinforcements made of CfK that we have tried and tested.We have deliberately chosen a scale of 1:4 to give you a compact, thoroughbred aerobatic glider with the flight characteristics of a large model. Therefore we also deliberately chose a 4 flap wing to give you the possibility to warp the airfoil accordingly and adapt it to the flight conditions, as well as to increase the maneuverability around the longitudinal axis in aerobatics.The wing stub is made of 18x1mm aluminum tube with solid CfK rod inside. The included parts of the cockpit even allow for a prototype-like extension at your own discretion.The flight characteristics can be classified as extremely good-natured. The FOX flies in any situation as if on rails, even in aerobatics it reacts agilely and dynamically.Features:- Wing and tailplane in GRP shell construction with CFRP reinforcements.- GRP fuselage with CfK reinforcements- Model ready painted in the mold- Wing pluggable by means of aluminum CFRP round rod- Ailerons, flaps and elevator as elastic flaps, rudder as cove- Wing profile: HQ/W 2.5/11- Elevator profile: NACA 0010RC Functions:- Rudder- Elevator- Aileron- FlapsRequired accessories (not included):B-No.: 1 piece 8717 ROBBE RO-CONTROL PRO 14-130 6-14S -130(160)A OPTO controllerB-No.: 2 pieces 7370 Ro-Power Ultra Maxamp 4200mAh 14,8V battery packB-No.: 1 piece - Ro-BEC HVB-No.: 1 piece 46091 XT-90 Adapter serialB-Nr.: 1 piece 46037 Charging cable XT-90B-No.: 1 piece 70700 Start trolleyB-Nr.: 1 piece 21150 Protective bags 2661
Robbe Modellsport Limit Pro PNP PETROL with built-in motor and servos, full-GRP/CRP
€649.99*
Product no.:
9781142
Manufacturer no.:
2680
The "LIMIT Pro" is a classic hotliner in modern CFK/GFK shell construction with first-class all-round flight characteristics and impressive design.With the drive of the PNP version, breathtaking climbing flights are achievable. Reached altitude is spontaneously converted into forward speed.Low overflights with high speed are spectacular and demonstrate the performance of the model."Limit Pro" can also be flown softly and is a good choice for updrafts. Therefore the model is also suitable for a more comfortable operation.The handling is always easy and well controllable and will not cause any difficulties for the experienced pilot."Limit Pro" is available in two versions (ARF/PNP). With the PNP version the drive is already installed, as well as all servo and the wiring. 2680
Robbe Modellsport Limit Pro PNP ORANGE with built-in motor and servos, full-GRP/CRP
€649.99*
Product no.:
9781144
Manufacturer no.:
2682
The "LIMIT Pro" is a classic hotliner in modern CFK/GFK shell construction with first-class all-round flight characteristics and impressive design.With the drive of the PNP version, breathtaking climbing flights are achievable. Reached altitude is spontaneously converted into forward speed.Low overflights with high speed are spectacular and demonstrate the performance of the model."Limit Pro" can also be flown softly and is a good choice for updrafts. Therefore the model is also suitable for a more comfortable operation.The handling is always easy and well controllable and will not cause any difficulties for the experienced pilot."Limit Pro" is available in two versions (ARF/PNP). With the PNP version the drive is already installed, as well as all servo and the wiring. 2682
Robbe Modellsport Limit Pro ARF PETROL Full-GRP/CRP
€419.99*
Product no.:
9781141
Manufacturer no.:
2679
The "LIMIT Pro" is a classic hotliner in modern CFK/GFK shell construction with first-class all-round flight characteristics and impressive design.With the drive of the PNP version, breathtaking climbing flights are achievable. Reached altitude is spontaneously converted into forward speed.Low overflights with high speed are spectacular and demonstrate the performance of the model."Limit Pro" can also be flown softly and is a good choice for updrafts. Therefore the model is also suitable for a more comfortable operation.The handling is always easy and well controllable and will not cause any difficulties for the experienced pilot."Limit Pro" is available in two versions (ARF/PNP). With the PNP version the drive is already installed, as well as all servo and the wiring. 2679
Robbe Modellsport Limit Pro ARF ORANGE Full-GRP/CRP
€419.99*
Product no.:
9781143
Manufacturer no.:
2681
The "LIMIT Pro" is a classic hotliner in modern CFK/GFK shell construction with first-class all-round flight characteristics and impressive design.With the drive of the PNP version, breathtaking climbing flights are achievable. Reached altitude is spontaneously converted into forward speed.Low overflights with high speed are spectacular and demonstrate the performance of the model."Limit Pro" can also be flown softly and is a good choice for updrafts. Therefore the model is also suitable for a more comfortable operation.The handling is always easy and well controllable and will not cause any difficulties for the experienced pilot."Limit Pro" is available in two versions (ARF/PNP). With the PNP version the drive is already installed, as well as all servo and the wiring. 2681
Robbe Modellsport Cyclone XT 6,2M ARF mit GRP FUSELAGE 4-piece wing with abachi planking
€999.99*
Product no.:
9780693
Manufacturer no.:
2665
The CYCLONE XT is the consistent further development of its predecessor CYCLONE. With an incredible wingspan of 6,20m, it is the giant in the electric glider sky! The epithet XT stands for "extended". The model has a painted GRP fuselage and two 2-piece wings with Abachi planking and GRP carpet pad. Its new LS 6330-15 brushless drive is rated for 8S LiPo operation for powerful climbs and easy takeoff from the launch trolley.The outer wing design, electrical wing mating using MPX connectors in mounting frames and the new LS 6330-15 long shaft drive motor are the main features of the new Cyclone XT, along with the increased wingspan. The canopy latch has been moved to the rear under the wing/fuselage moldings as is common with large scale model gliders.The successful HQ/W airfoil has been left in place. It runs from an HQ/W-2.5/12 at the root rib to an HQ/W-2.5/11 in the center and finishes at the winglet with an HQ/W-3/10.5. This is an excellent way to fly extended thermal flights, as this is the CYCLONE XT's profession. The flight characteristics are as usual good-natured and quiet.Features:New Ro-Power Torque LS 6330-15 drive for 8S LiPo (PNP version only).Two-piece fuselage made of GFRP/Kevlar reinforced with CFRPWings completely covered with abachi for high compressive strengthReady covered with ORACOVER®Four-part wing, separableWings pluggable with MPX connectors in mounting frame for electrical connection (PNP version only)Solid 14x500mm round steel mating of the inner surfaces, 12x375mm carbon mating for the outer wingsMiddle wings on the upper side completely underlaid with 200g carbon fabric, underside 80g glass fabricOuter wings completely underlaid with 80g glass matNew canopy lock under wingHigh quality M3 linkage accessories Made in Germany Stable elevator linkage with 5/3 mm CFRP tube and M3 clevisesReinforced tail constructionContinuous sandwich spar (carbon-pine-carbon) for maximum bending stiffnessPrecisely fitted anti-twist devices in all wing sectionsHigh degree of prefabrication 2665
Robbe Modellsport AVALANCHE ARF FULL-GFK/CFK 2,8M ELECTRIC
€999.99*
Product no.:
9776971
Manufacturer no.:
2659
The Robbe AVALANCHE is a full GfK/CfK all-round electric sailplane with extremely high strength thanks to the high CfK content in the construction. It loves speed and tight manoeuvres, but can also be flown tame and slow.A model created for the ambitious model pilot with high demands!features:Full GfK/CfK model in negative shell constructionextremely torsion and bending resistantready painted in the mould4-flap wings with top-hinged rudders (cross-hinged)36x12mm carbon rectangular connectorpluggable V-tailspacious fuselage with removable canopyReady adapted connectors on tail units and wingsMotor bulkhead already glued in 2659
Robbe Modellsport ARCUS E 2.2 ARF(PNP) with retract power unit, retract landing gear and airbrakes
€209.99*
Product no.:
9705429
Manufacturer no.:
2568
Our model of the Arcus E closes the gap between the beginner gliders made of EPO-foam and the larger scale gliders in wood or GRP construction. With the Arcus E 2.2 the advanced glider model pilot has the possibility to use the numerous technical features of the large scale models, such as retractable engine, spoilers and retractable landing gear in an affordable model. At the same time, however, he retains the advantage of the robust fuselage and wing material made of EPO foam in this elegant scale glider.Features:- Functional, servo-operated spoilers- Functional retractable engine with control electronics- Rigid nose gear 2568
-12%
Robbe Modellsport ARCUS II RTF WITH FUTABA T6L SPORT WITHOUT BATTERIES, CHARGER
€229.99*
€259.99*
(11.54% saved)
Product no.:
9767658
Manufacturer no.:
2651
Whether you are an ambitious beginner or an advanced model pilot, the Arcus II is the right choice when looking for a powerful and compact glider with electric propulsion. Whether fast or slow, agile or calm, powered or gliding, with this model you always have the right all-rounder in action. The model is controlled via three axes. Thanks to its powerful drive set, the Arcus II has enough power for climbing and then gliding in good thermals. Despite its wingspan of 1,840 mm, it can be easily transported thanks to the divisible wing. The model comes with four mounted servos for aileron, rudder and elevator as well as a mounted drive set. CFRP reinforcements in the fuselage and wings, as well as the undercarriage and two plastic protectors for the fuselage complete the scope of delivery.The model can be retrofitted with flaps in no time at all. The large ailerons already have an embossed dividing line for this retrofit, as well as the mounting points for the additional rudder horns. The wings are equipped with cable ducts for the additional servos. Thus only the available retrofit set as well as two further 8 - 9 g servos, a suitable adhesive and of course a free channel at the remote control/receiver are needed. Of course, the installation is described in the illustrated building instructions. 2651
Robbe Modellsport ARCUS II NIGHT PNP WITH LED LIGHTS
€249.99*
Product no.:
9766891
Manufacturer no.:
2650
Whether you are an ambitious beginner or an advanced model pilot, the Arcus II is the right choice when looking for a powerful and compact glider with electric propulsion. Whether fast or slow, agile or calm, powered or gliding, with this model you always have the right all-rounder in action. The model is controlled via three axes. Thanks to its powerful drive set, the Arcus II has enough power for climbing and then gliding in good thermals. Despite its wingspan of 1,840 mm, it can be easily transported thanks to the divisible wing. The model comes with four mounted servos for aileron, rudder and elevator as well as a mounted drive set. CFRP reinforcements in the fuselage and wings, as well as the undercarriage and two plastic protectors for the fuselage complete the scope of delivery.The model can be retrofitted with flaps in no time at all. The large ailerons already have an embossed dividing line for this retrofit, as well as the mounting points for the additional rudder horns. The wings are equipped with cable ducts for the additional servos. Thus only the available retrofit set as well as two further 8 - 9 g servos, a suitable adhesive and of course a free channel at the remote control/receiver are needed. Of course, the installation is described in the illustrated building instructions. 2650
Robbe Modellsport AMPLITUDE ARF FULL GRP/CFRP HOTLINER
€479.99*
Product no.:
9754427
Manufacturer no.:
2637
The AMPLITUDE is a modern hotliner in GFK/CFK negative shell construction with first-class all-round flight characteristics and extraordinary design with high visibility in flight.In addition to the ailerons, the carbon-fibre reinforced wing also has flaps that are cross-jointed. This allows both the manoeuvrability and the slow flight characteristics to be optimized. Landing is child's play with the butterfly position, even in tight spaces.All rudders are attached as elastic flaps.The fuselage is extremely spacious under the wing to accommodate larger batteries for high performance propulsion. Transverse and longitudinally laminated CfK reinforcements ensure high strength.With the drive of the PNP version, breathtaking climbs are achievable. In the ARF version own drive setups can be used.Low overflights at high speed are spectacular and demonstrate the performance of the model.However, the AMPLITUDE can also be flown softly and is quite happy to accept updrafts. Thus, the model is also suitable for more comfortable all-round operation.The AMPLITUDE is available in two versions (ARF and PNP). With the PNP version, the drive is already installed, as are all the servos and the cabling.Features:- large-volume fuselage for large batteries- 4 flap wings with flaps!- eye-catching modern design with extremely good recognizability- very many CfK reinforcements, therefore high strength- three M3 flat head screws with the same wrench size- length 1,04m- Profile: MH-30 - 4 flap wings (ailerons and flaps)- Empty weight approx. 725g- Flight weight approx. 1590g 2637
Robbe Modellsport LIMIT PRO ARF FULL GRP/CRP
€419.99*
Product no.:
9754430
Manufacturer no.:
2642
The "LIMIT Pro" is a classic hotliner in modern CFK/GFK shell construction with first-class all-round flight characteristics and impressive design.With the drive of the PNP version, breathtaking climbing flights are achievable. Reached altitude is spontaneously converted into forward speed.Low overflights with high speed are spectacular and demonstrate the performance of the model."Limit Pro" can also be flown softly and is a good choice for updrafts. Therefore the model is also suitable for a more comfortable operation.The handling is always easy and well controllable and will not cause any difficulties for the experienced pilot."Limit Pro" is available in two versions (ARF/PNP). With the PNP version the drive is already installed, as well as all servo and the wiring. 2642
Robbe Modellsport MILAN LASER CUT WOODEN KIT ELECTRIC GLIDER
€149.99*
Product no.:
9752781
Manufacturer no.:
4010
Milan is an elegant electric glider in the 2m class, which responds excellently to thermals. Already during the construction, joy arises, since all wooden parts are manufactured exactly fitting in the laser cut. The well thought-out construction, in which the wing is provided with a comb bar, leads to a quick assembly. The double-sided balsa planking of the wings from the leading edge to the main spar results in a light and torsion-resistant D-box. The wing is constructed in 3 parts with central piece and attachable surfaces. This creates a handy packing size for transport.The fuselage is constructed in a classic stable wooden construction, whereby the curved side parts provide an elegant appearance. The cross tail is screwed to the fuselage and can optionally be removed. The Milan is not only an electric sailor suitable for everyday use, but the ideal companion for your holiday.The Milan is equipped with a light BL motor, e.g.2834-10, which drives a folding 11 x 8" propeller. The 3s Lipo battery with 2200 mA is inserted into the fuselage via a removable fuselage cover. It has enough displacement to be able to adjust the centre of gravity exactly without trim weight. With a take-off weight of approx. 995g a safe hand take-off is possible. After 15 - 20 sec. engine running time you have already reached a flight altitude of approx. 150 m. Even small thermal beards can be flown out well with the Milan. In addition to the ailerons in the outer surfaces, the centre section has flaps that can be extended to 90°. This allows safe landings on small landing sites despite the excellent gliding characteristics. 4010
Robbe Modellsport PRIMO Q WOODEN KIT "MADE IN GERMANY"
€139.99*
Product no.:
9749534
Manufacturer no.:
2556
Learn to work by hand, recognize the physical demands of an airplane model and experience the joy and satisfaction when a self-built flight model makes its first trajectories in the sky. The Primo meets all these requirements and is easy to assemble and is particularly good-natured in its flight behaviour. By using ailerons, the model is much more agile and manoeuvrable and can also be a lot of fun for the experienced model pilot. The model is made of robust balsa/plywood. The construction in laser cut manufacturing is very precise and easy to assemble. Thus, even less experienced model makers should be able to assemble a wooden model without any problems. A detailed illustrated assembly instruction shows step by step and clearly visible through all construction phases. All parts required for the model are included, except electrical equipment, remote control components, covering material and adhesives. Our wooden construction kits are developed and manufactured in Germany. We are proud to be able to offer you a model with the predicate "Made in Germany". 2556
Robbe Modellsport SZD-54 EPO AEROBATIC GLIDER EPO PNP
€229.99*
Product no.:
9742634
Manufacturer no.:
3014
Like the original, the well-known two-seater school and performance glider, our model of the SZD-54 has the necessary characteristics of a training machine, but it also satisfies the increased demands placed on an aerobatic glider.For the advanced beginner, a low basic speed and a high profiling have a positive effect on the behavior of the model during training flights - the extremely stable wings, the full-gas strength and a climbing angle under full load of approx. 80 degrees make the SZD-54 an aerobatic performance glider that will appeal to even experienced pilots.The SZD-54 stands out from many EPO foam models of this class due to these extraordinary characteristics, combined with a wingspan of more than 2.1 meters and an elegant, model-inspired lines of the trunk and narrow wings.The ARF model includes a powerful brushless motor and a Hobbywing® Skywalker BL controller. 3014
Robbe Modellsport Arcus II PNP
€179.99*
Product no.:
9747358
Manufacturer no.:
2649
Whether you are an ambitious beginner or an advanced model pilot, the Arcus II is the right choice when looking for a powerful and compact glider with electric propulsion. Whether fast or slow, agile or calm, powered or gliding, with this model you always have the right all-rounder in action. The model is controlled via three axes. Thanks to its powerful drive set, the Arcus II has enough power for climbing and then gliding in good thermals. Despite its wingspan of 1,840 mm, it can be easily transported thanks to the divisible wing. The model comes with four mounted servos for aileron, rudder and elevator as well as a mounted drive set. CFRP reinforcements in the fuselage and wings, as well as the undercarriage and two plastic protectors for the fuselage complete the scope of delivery.The model can be retrofitted with flaps in no time at all. The large ailerons already have an embossed dividing line for this retrofit, as well as the mounting points for the additional rudder horns. The wings are equipped with cable ducts for the additional servos. Thus only the available retrofit set as well as two further 8 - 9 g servos, a suitable adhesive and of course a free channel at the remote control/receiver are needed. Of course, the installation is described in the illustrated building instructions. 2649
Robbe Modellsport Robby EPP free flight model 480mm glider
€10.99*
Product no.:
9796147
Manufacturer no.:
2696
Attractive free-flight model made of robust EPP with ready-glued decal set. The model only needs to be assembled and is ready to fly within a few moments. The robust material prevents major damage if the model unexpectedly hits a hard obstacle. 2696
-13%
Robbe Modellsport Rasant SPEED combustion engine anniversary edition Action SVR with 1:1 reprint of the original plan from the 70s
€129.99*
€149.99*
(13.33% saved)
Product no.:
9798182
Manufacturer no.:
9785083+9791327
The current model is a tribute to the legendary Robbe original of the early 70s and has been carefully modernized so as not to destroy the charm and character of the model, but still meet the increased requirements of more modern times. Like back then, the new edition is available in two versions. On the one hand in the classic drive version for glow ignition engines with approx. 3.5ccm, on the other hand for electric drive, but in a more modern design as 1977 for the current, more powerful brushless drives in conjunction with Lipo battery. Especially the "Speed" version with the outward tapered wing looks visually dynamic and underlines the claim of a speed model of its time. Excerpt from the 1977 Robbe catalog:"A model for advanced RC pilots who want to get involved in show flying without spending a lot of money, or who want to experience the thrill of "speeding" for their own pleasure.This new edition comes exclusively with packaging box in the design of the 70s!Note: The model is not an uncompromising high-speed model by today's standards! It comes from a generation many decades back. However, the flight characteristics are still a guarantee for speedy flying and offers uncomplicated handling in comparison. In addition, the design offers a wide field for modifications and tuning. Not least because of this, the Rasant was already a popular model in the 70s, for example, to install his own drive variants. Some modelers even installed a 6.5cc glow ignition engine with resonance tube. The flight performance was brute, but required corresponding careful and prudent handling in construction and also in flight operation, since the model was not designed then as well as today. The brushless drive recommended by us represents a successful compromise. As a combustion engine, especially engines of the 25 class such as OS MAX 25FP for real "retro pilots" or their current successors from today's time prove themselves. 9785083+9791327
-13%
Robbe Modellsport Rasant SPEED electric anniversary edition Action SVR with 1:1 reprint of the original plan from the 70s
€129.99*
€149.99*
(13.33% saved)
Product no.:
9798181
Manufacturer no.:
9785082+9791327
The current model is a tribute to the legendary Robbe original of the early 70s and has been carefully modernized so as not to destroy the charm and character of the model, but still meet the increased requirements of more modern times. Like back then, the new edition is available in two versions. On the one hand in the classic drive version for glow ignition engines with approx. 3.5ccm, on the other hand for electric drive, but in a more modern design as 1977 for the current, more powerful brushless drives in conjunction with Lipo battery. Especially the "Speed" version with the outward tapered wing looks visually dynamic and underlines the claim of a speed model of its time. Excerpt from the 1977 Robbe catalog:"A model for advanced RC pilots who want to get involved in show flying without spending a lot of money, or who want to experience the thrill of "speeding" for their own pleasure.This new edition comes exclusively with packaging box in the design of the 70s!Note: The model is not an uncompromising high-speed model by today's standards! It comes from a generation many decades back. However, the flight characteristics are still a guarantee for speedy flying and offers uncomplicated handling in comparison. In addition, the design offers a wide field for modifications and tuning. Not least because of this, the Rasant was already a popular model in the 70s, for example, to install his own drive variants. Some modelers even installed a 6.5cc glow ignition engine with resonance tube. The flight performance was brute, but required corresponding careful and prudent handling in construction and also in flight operation, since the model was not designed then as well as today. The brushless drive recommended by us represents a successful compromise. As a combustion engine, especially engines of the 25 class such as OS MAX 25FP for real "retro pilots" or their current successors from today's time prove themselves. 9785082+9791327
Robbe Modellsport EVOA 3.0 PNP FRP "electric"
€1,499.99*
Product no.:
9763413
Manufacturer no.:
2691
Our new all-rounder Star is called EVOA 3.0!It has a very compact and transport-friendly size with its 3.0 m wingspan and the two-part wing, which is attached to the side of the fuselage. The wing load is transmitted via a large CFRP spar connector. The EVOA is manufactured using the latest full GRP sandwich construction and has many carbon fiber reinforcements in the critical areas. The wing is designed as a typical 4-flap wing with ailerons and flaps, which are classically cross-hinged. The lateral axis is stabilized and controlled via a laterally pluggable pendulum elevator using a bellcrank. The flight characteristics can be described as more than just good-natured, especially due to its low weight. It can be circled slowly and comfortably in thermals, but can also be flown somewhat more sportily in dynamic aerobatics.The model is available in four versions (electric and glider, each as ARF/PNP) and is largely pre-assembled in the PNP version. The Ro-Power Torque X-36 motor, spinner, Aeronaut propeller and the servos including wiring are pre-installed in the electric PNP version, so that the construction effort is reduced to a minimum. The glider PNP is just as prefabricated, but without the motor, but with a closed glider fuselage nose. In the ARF version of both versions, you have the option of using individual RC components at your own discretion. 2691
Robbe Modellsport EVOA 3.0 ARF FRP "electric"
€999.99*
Product no.:
9763412
Manufacturer no.:
2690
Our new all-rounder Star is called EVOA 3.0!It has a very compact and transport-friendly size with its 3.0 m wingspan and the two-part wing, which is attached to the side of the fuselage. The wing load is transmitted via a large CFRP spar connector. The EVOA is manufactured using the latest full GRP sandwich construction and has many carbon fiber reinforcements in the critical areas. The wing is designed as a typical 4-flap wing with ailerons and flaps, which are classically cross-hinged. The lateral axis is stabilized and controlled via a laterally pluggable pendulum elevator using a bellcrank. The flight characteristics can be described as more than just good-natured, especially due to its low weight. It can be circled slowly and comfortably in thermals, but can also be flown somewhat more sportily in dynamic aerobatics.The model is available in four versions (electric and glider, each as ARF/PNP) and is largely pre-assembled in the PNP version. The Ro-Power Torque X-36 motor, spinner, Aeronaut propeller and the servos including wiring are pre-installed in the electric PNP version, so that the construction effort is reduced to a minimum. The glider PNP is just as prefabricated, but without the motor, but with a closed glider fuselage nose. In the ARF version of both versions, you have the option of using individual RC components at your own discretion. 2690