The Mega Tamiya Sale

Tamiya reissues the legendary Holiday Buggy from 1980! The blue hard plastic body, however, is not mounted on the original Holiday Buggy but on a modern DT02 chassis, as it is already known from the Super Fighter G, Desert Gator, Sand Viper or Neo Falcon. 300058470

This is a 1/10 scale R/C model assembly kit.Length: 450mm, width: 185mm, height: 130mm. Wheelbase: 257mm. The lightweight, durable 1.0mm thick polycarbonate body realistically captures the sleek form in style. The kit is based upon the shaft-driven 4WD TT-02 chassis which gives great adaptability with various kinds of setups. Rally dish wheels molded in white are paired with tread pattern racing radial tires. Comes with stickers and masking stickers for use in the paint job. Please note that body requires cuting out, painting, application of stickers, and other work. 300058718

Reissue of the legendary 2WD buggy The Hornet from 1984, the Hornet is not only a top model for TAMIYA collectors, but also for all sand buggy fans.Technical details:2WD rear-wheel drive friction damper Pin studded tyres rear and front grooved tyres sealed gear box tub chassis with side ramming bars Polycarbonate bodyworkDriver figure 300058336

Bekannt als Super Fighter G bildet dieses Chassis ( DT-02 ) das Fahrwerk der Sand Viper. Komplett kugelgelagert und mit elektronischem Fahrtenregler ausgerüstet, ist dieser Buggy Dank des geschlossenen Getriebegehäuses ein echter Geländerenner mit Ausbauoptionen wie bei den Wettbewerbsbuggys (Tamiya Fighter-Cup). Der Typ 540 Motor gibt dem 2WD Renner die nötige Power für maximale Leistung.Features:ÖldruckdämpferAntriebswellen aus MetallRadachsen aus Metall 300058374

This is a 1/10 scale R/C model assembly kit. Length: 425mm, width: 189mm, height: 145mm. Wheelbase: 257mm.Features a 1.0mm polycarbonate body, and includes clear body for export and pre-painted body for the Japanese market. Separate parts are included for side mirrors and rear wing.Dish-type wheels (previously used on Item 58257, etc.) are molded in white ABS plastic, and paired with treaded tires.Stickers and masking stickers for use in the paint job are also included.The TT-02 chassis is a highly versatile shaft-driven 4WD unit, based around a durable bathtub.4-wheel independent double wishbone suspension has identical arm and upright parts for ease of maintenance.A wide range of Hop-Up Option parts is available to customize your chassis.Warning notices:Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model.When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury.Read and follow the instructions supplied with paints and/or cement, if used (not included in kit).Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads. 300058691

Tamiya welcomes another release on our popular TT-02 chassis; this time, the Motul Autech Z! The Motul Autech Z is raced by the NISMO team in the 2023 Super GT series. Although it inherits elements of the NISSAN Z road car design, it is very different, with a carbon fiber body and a front 550hp-plus 2-liter 4-cylinder single turbo engine. It got off to a great start, winning the opening race of 2023 in Okayama.Product detailsThis is a 1/10 scale R/C model assembly kit. Length: 468mm, width: 188mm, height: 120mm. Wheelbase: 257mm.The authentic form of the Motul Autech Z is captured in style by a lightweight, rigid polycarbonate body with separate polycarbonate front and rear light cases (LEDs are not attachable) and canards.Separate black ABS plastic parts realistically depict distinctive side mirrors and a large rear wing.The model utilizes the shaft-driven 4WD TT-02 chassis which features superior adaptability and stability.6-spoke black wheels are paired with slick tires.Includes Item 51007 (Urethane Bumper M (TT-01/TGS)) to keep the body in top condition.Comes with stickers and masking stickers for use in the paint job. 300058735

This Tamiya R/C kit recreates the Toyota GR 86 as a 1/10 R/C product. The Toyota GR 86 is a lightweight front- engine, rear-wheel-drive sports car which was announced in April 2021. It has a broad stance, low center of gravity, and employs aerodynamic components rooted in motorsports. The aluminum engine hood, roof and front fenders are lightweight and the suspension features front strut and rear double wishbone systems. This car is powered by a 2.4-liter horizontally opposed four-cylinder DOHC engine capable of 235hp.Adaptable TT-02 Chassis offers balanced shaft driven 4WDThe shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.The Toyota GR 86 is made of polycarbonate with front/rear polycarbonate light cases (NOTE: LED lights are not attachable) Includes black ABS plastic side mirrors.Features the shaft-driven 4WD TT-02 chassis which gives high adaptability with various kinds of setups.Black 10-spoke one-piece wheels are paired with racing radial tires.Body requires painting, cutting out, attachment of parts, application of stickers, and other work.Includes: TBLE-04S ESC & 540 Torque-Tuned motor.Requires: 2-channel radio, steering servo, 7.2volt battery with compatible charger, and Tamiya PS paint. 300058694

The Supra was the fourth generation of Toyota (JZA80) which was announced as a Toyota’s flagship sportscar in 1993. Its top grade RZ model employed a 3-liter inline-6 twin turbo engine capable of 280hp, 6-speed transmission, 4-wheel double wishbone suspension and ventilated disc brakes for front and rear. The muscular form and high-spec performance mesmerized fans all over the world and achieved success in motorsports races.The 2WD BT-01 chassis gives a choice of two types of wheelbase (257mm or 251mm), and front- or rear- wheel drive system.Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars.?(Six setups are available in total.)Product detailsThis is a 1/10 scale R/C model assembly kit.Length: 457mm, width: 185mm, height: 135mm. Wheelbase: 257mmThe lightweight, durable 1.0mm-thick polycarbonate bodyThe 2WD BT-01 chassis gives a choice of two types of wheelbase (257mm or 251mm), and front- or rear- wheel drive system.Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars.?(Six setups are available in total.)The 4-wheel double wishbone suspension features symmetrical structure and friction dampers.Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.Many Hop-Up Option parts for TT-chassis cars can be used to fine-tune setupIncluding ESCWARNING!Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model.When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury.Read and follow the instructions supplied with paints and/or cement, if used (not included in kit).Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.Warning! Not suitable for children under 14 years. 300058733

Tamiya is proud to introduce the Lotus Europa Special as a 1/10 R/C product paired with the M-06 chassis. The Lotus Europa debuted in 1966, showcasing what was then a revolutionary midship layout, with a lightweight FRP body, making a global splash. In 1972 perhaps the finest model - Lotus Europa Special - in the series was released with 1.6-liter inline-4 engine (big valve twin-cam engine) capable of 126hp which was the largest maximum output among the Lotus Europa series. Also, the car had two transmission options, with the choice of the standard and 5-speed transmission.FeaturesThis is a 1/10 scale R/C model assembly kit. Length: 390mm, width: 176mm, height: 114mm.The sharp low-slung form of the car is accurately captured in lightweight and durable polycarbonate. Separate parts depict side mirrors, light cases, and rear wing.The model is based upon the rear-wheel drive M-06 chassis which allows stable performance.The M-06 chassis features a rear-mounted motor, and a longitudinally-mounted battery pack with R/C units positioned on either side for optimum balance and a low center of gravity.This model utilizes the 225mm wheelbase M-06M chassis.Dedicated stickers are also included to recreate gold body pinstripes inspired by the Lotus car which flourished in Formula One.Includes marking stickers, and masking stickers for use during the paint job.A variety of Hop-Up Option parts are available to customize the chassis. 300058698

Tamiya welcomes this 1/10 R/C model assembly kit – which depicts the high-performance rally-oriented RS version of the 1998 debut Ford Focus compact car with various customizations – based upon our popular TT_02 chassis. In 2003, the Ford Motor Co. Team chief engineer Christian Loriaux made various changes such as seat position, roll cage and suspension to the Ford Focus, and improved aerodynamics with the updated bumper shape, hood intake position and large rear wing and more. The 2-liter inline-4 turbo engine was capable of 300PS and 550Nm. This rally car secured the second place of the Manufacturer ranking four times during 7-year races, and showed off its strength. This time, the kit recreates a custom street version without sponsor logos.This is a 1/10 scale R/C model assembly kit. Length: 427mm, width: 185mm, height: 145mm. Wheelbase: 257mm.The lightweight, durable 1.0mm-thick polycarbonate body authentically captures the 2003 Ford Focus RS Custom in style.Separate plastic parts realistically depict side mirrors and rear wing.The model utilizes the efficient shaft-driven 4WD TT-02 chassis which features superior adaptability and stability.White 16-spoke wheels are paired with tread pattern racing radial tires.Comes with stickers and masking stickers for use in the paint job. 300058724

This is a limited-edition version of the 2003 Ford Focus RS Custom (Item 58724-A) kit with pre-painted, pre-cut body and wheel arches, great for not only beginners but also veterans of the hobby.The R/C model assembly kit recreates the rally oriented 2003 Ford Focus RS Custom on the easy to assemble and drive TT-02 chassis. In 2003, the Ford Motor Co. Team chief engineer Christian Loriaux made various changes to the Focus such as seat position, roll cage and suspension, and improved aerodynamics with the updated bumper shape, hood intake position and large rear wing and more. The 2-liter inline-4 turbo engine was capable of 300PS and 550Nm. This rally car secured second place in the Manufacturer ranking four times during its 7-year race campaign and showed off its strength. This kit recreates a custom street version without sponsor logos.TT-02: Adaptable, balanced shaft driven 4WD.The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.Specifications:width: 185mm height: 145mm Wheelbase: 257mm 300047495

This radio-controlled model assembly kit recreates the Peugeot 306 Maxi. The kit is based on the beginner friendly and highly customizable BT-01 chassis, which allows hobbyists to grow as their driving and building skills develop. Like the full-size car it depicts, the chassis configuration on the BT-01 chassis is set up in the front motor, front drive configuration for unparalleled realism.About the Peugeot:Based upon the FF hatchback Peugeot 306, the Peugeot 306 Maxi was developed with dedicated components for rallying. A 2.0-liter naturally aspirated engine in front was capable of 280hp, and the car had enlarged fenders, roof spoiler, and a lightened body. Including the victories in 1996 and 1997 rally races in France, this car achieved many racing successes such as the class championship in the 1996 rally in Monte Carlo and third place in the 5th and 6th races on the 1997 global rally circuit. This R/C model assembly kit is inspired by such rally champions.About the BT-01 Chassis:The 2WD BT-01 chassis gives the choice of two types of wheelbases, and front-or rear-wheel drive system. Without removing the battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front-and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as the motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.1/10 scale R/C model assembly kit. Length: 404mm, width: 187mm, height: 155mm. Wheelbase: 257mm (standard).BT-01 chassis is set up for the front motor, front drive configuration for this model.The form of the Peugeot 306 Maxi is authentically recreated in lightweight polycarbonate.6-spoke wheels are paired with racing radial tires.Separate molded plastic parts recreate side mirrors and the rear wing.Livery markings are Tamiya original design to recreate fictitious team.Includes 540-Type Torque Tuned brushed motor and Hobbywing produced ESC.Required to complete: 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger and Tamiya PS paint. 300058746

The ever-increasing stable of Tamiya R/C cars welcomes a brand new model of a classic car, with the addition of the Volkswagen Karmann Ghia to the line-up, on the RWD M-06 chassis. The Karmann Ghia was a stylish coupé based upon the same platform as the legendary Beetle. Its body was designed by Italian firm Ghia and manufactured by the German company Karmann.About the ModelThis is a 1/10 scale R/C model assembly kit. Length: 410mm, width: 182mm, height: 125mm.The classic form of the car is accurately captured in lightweight and durable polycarbonate. Separate plated parts depict side mirror, bumpers and light cases.Includes marking stickers, and masking stickers for use during the paint job.The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C units positioned on either side for optimum balance and a low center of gravity.This model utilizes the 239mm wheelbase M-06L chassis.Metal-plated wheels make for a great look, and are paired with front radial and rear super grip radials for superior stability and sharp handling.A host of Hop-Up Option parts are available to customize the chassis to your driving needs.WARNINGS:Before you start the assembly, you should have read and understood all instructions. If a child is assembling the model, a supervising adult should also have read the assembly instructions.Tools including a knife are used to assemble the kit. Special care should be taken to avoid injury.If difficulties occur during assembly, ask an adult to supervise the work or a model builder with RC experience or a specialist dealer.Use tools only for their intended purpose. There is a risk of injury if used incorrectly.If you use paints and/or adhesives (not included in the kit), observe and follow the instructions enclosed with the kit.Keep the kit away from small children. Prevent children from putting any components in their mouth or pulling plastic bags over their head.Caution! Not suitable for children under 14 years of age. 300058677

An old favorite in a shiny new outfit! The Midnight Pumpkin Metallic Special features numerous chrome-plated parts. This pickup, sporting the iconic '53 Ford F-100 body, flattens everything in its path with its massive monster tires. 300058365

The Raybrig NSX Concept-GT is also released on the reliable shaft-driven 4WD of the TT-02 Chassis. The racing car was developed to race in the 2014 Japanese Super GT Series, and features a 1.6-liter turbocharged direct injection engine with anti-lag, plus a midship layout that optimizes distribution of car's weight, particularly taking into account its unique hybrid system.About the ModelThis is a 1/10 scale R/C model assembly kit. Wheelbase: 257mm.The durable polycarbonate body accurately captures the low nose and complex make up of the front and rear ends.The TT-02 is a highly versatile and easy-to-maintain chassis.Separate parts are included to recreate dynamic rear wing and unique door mirrors.Comes with black 10-spoke wheels.Includes body markings and masking stickers for use when painting the model.A wide range of option parts is available to tune and customize TT-02 Chassis cars.Please note that R/C equipment and battery pack are separately required. 300058599

Another one of Tamiya's classic creations, the R/C Lunch Box (1st released, 1987) was loved for its camp appearance as much as for its R/C performance. The boxy minivan body raised up over monster truck wheels ensure that this R/C van will get attention anywhere you choose to drive it. Use the sides of the van as a canvas to paint your own original designs for the ultimate conversation piece!Features:1/10 scale R/C assembly kitBody is white ABSwheels are yellow ABSBox type frame 2WD chassis is equipped with front swing axle and rear rolling rigid suspensionFully-enclosed gearbox protects against dirt and debris115mm diameter tiresWheelie bar includedTamiya TEU-105BK forward and reverse brushed motor speed control. (equipped with low voltage protection feature)Includes Tamiya 540 brushed motor 300058347

This kit model is a faithful replica of the NISMO GT-R in scale 1:10. The 2014 version won the Super GT GT series GT500 and the Super GT can be compared with the DTM in Europe. In both racing series there are exact regulations and this makes the races especially exciting. With the TAMIYA Motul Autech GT-R you can now bring the GT500 to RC racing tracks. The TAMIYA model is based on the entry-level TT-02 chassis, which is based on the proven TT-01 chassis and is particularly stable and low-maintenance. With the assembly you get to know the RC technique almost playfully and you automatically become your own team leader! The model has an enclosed all-wheel drive, independent wheel suspension, powerful 540 electric motor and an electronic brushless/brushed speed controller. Numerous tuning parts are available for the TT-02 chassis to make the model even faster and more stable. Features:Kit model in scale 1/10Enclosed 4WD all-wheel drivetrue to the original, transparent Motul Autech GT-R polycarbonate body.powerful 540 electric motorindependent front and rear suspensionelectronic brushless/brushed speed controllermany tuning parts optionally available 300058625

Tamiya is delighted to welcome the 1992 Audi V8 Touring as a model on our popular TT-02 chassis. The 1992 Audi V8 Touring employed an improved 3.6-liter V8 engine, Audi’s famed quattro four-wheel drive, and an imposing body. It overcame significant ballast handicaps and showed off overwhelming strength, particularly in a podium sweep at the 1st race of the 2nd meet at the Nürburgring.This is a 1/10 R/C model assembly kit. Length: 463mm, width: 188mm, height: 138mm. Wheelbase: 257mm.The powerful, imposing body is molded accurately in lightweight and durable polycarbonate (clear). Stickers are included to recreate the markings for the 1992 Audi V8 Touring. Masking stickers will aid in the paint job.Two-piece mesh wheels have silver color rims and spokes. They are paired with racing slick tires.Separate parts are included to depict side mirrors.The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly.4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride.A wealth of Hop-Up Option parts is available to tune the TT-02 chassis to your needs 300058699

This model will recreate the Subaru WRX STI car which took an impressive victory in the SP3T class of the Nürburgring 24 Hours race at the legendary German circuit in May 2016. The car is powered by the same engine as in its production model - the EJ20 2-liter horizontally-opposed turbo engine.About the Model“ This is a 1/10 scale R/C model assembly kit.“ The aerodynamically-optimized form of the race version of the WRX STI is accurately rendered in lightweight and durable polycarbonate.“ Separately molded parts are included in the kit to recreate side mirrors and rear wing.“ The beginner-friendly yet highly adaptable TT-02 is a versatile and easy-to-maintain chassis.“ Gun metal color mesh type wheels are paired with slick tires.“ Stickers are included to recreate the markings of the car, as are masking stickers for use when painting.“ An extensive TT-02 option parts line-up offers a number of opportunities to tune your car.“ Please note that R/C equipment and battery pack are separately required. 300058645

Tamiya is proud to announce the release of the Toyota GR Supra GT500 as a 1/10 R/C model assembly kit based on the TT-02 chassis. The GR Supra GT500 was developed in accordance with GT500 class regulations as a replacement for the LEXUS LC500 which flourished in three seasons from 2017 to 2019. With the streamlined car design of the roadgoing GR Supra, this racing car features a carbon monocoque frame, dedicated aerodynamic components and transmission, plus a 2,000cc inline 4-cylinder direct injection turbo-charged engine "RI4AG."This is a 1/10 scale R/C model assembly kit. Length: 466mm, width: 188mm, height: 125mm. Wheelbase: 257mm.The powerful form of the GR Supra GT500 is captured in style by a lightweight, rigid polycarbonate body (clear) with separate polycarbonate front light cases (LEDs are not attachable) and canards.Separate black ABS resin parts realistically depict distinctive side mirrors and a large rear wing.The model utilizes the shaft-driven 4WD TT-02 chassis which features superior adaptability and stability.12-spoke gun metal wheels are paired with racing slick tires.Includes Item 51007 (Urethane Bumper M (TT-01/TGS)) to keep the body in top condition.Comes with stickers and masking stickers for use in the paint job 300058703

TAMIYA presents the reissue of the Mercedes-Benz AMG CLK on the TT-02 chassis. The street version features a 4-liter V8 engine with 470 hp. The race car has been revised and received a new aerodynamic package, winning the Constructors' Championship in the German Touring Car Masters at the end of 2002.The TAMIYA model 58722 is based on the proven TT-02 chassis, which offers multiple adjustments for wheelbase, ground clearance, track width, and gear ratio. With countless optional tuning parts, the chassis can be quickly upgraded to a racer. The 4WD drivetrain with a central shaft, double wishbones, and shock absorbers on all four wheels provide a realistic driving appearance and excellent traction. The underside of the chassis is specially designed to be smooth, and the battery compartment accommodates all common battery types. A visual highlight is the wheel hubs, which have attached brake disc replicas.The included body is unpainted and can be painted with TAMIYA polycarbonate paints.Required accessories:Remote control with receiver, steering servo, 7.2V NiMH battery pack, charger, paint for polycarbonate body (TAMIYA PS-)4WD kit model, TT-02 chassis,Electronic speed controller, 540 torque-tuned motor, polycarbonate body with attachments,Cardan drive, shock absorbers,Independent suspension, profile tires,Tub chassis,InstructionsWARNING!Before starting assembly, please read and understand all instructions. If a child assembles the model, a supervising adult should also read the assembly instructions.Tools, including knives, will be used during assembly. Extra caution is necessary to avoid injury.If difficulties arise during assembly, ask an adult who is supervising or a model builder with RC experience or a specialist dealer for assistance.Use tools only for their intended purpose. Improper use may pose a risk of injury.When using paints and/or adhesives (not included in the kit), please observe and follow the instructions provided.Keep the kit away from small children. Prevent children from putting any parts in their mouths or pulling plastic bags over their heads.Product detailsKit model in 1/10 scaleBeginner-friendly TT-02 chassis - extremely robustLength: 444mm, Width: 185mm, Height: 125mm, Wheelbase: 257mmSealed 4WD all-wheel driveRealistic, unpainted polycarbonate bodyABS attachments: Side mirrors and large rear wingSpoke wheels with 26mm tiresIndependent suspension front and rearElectronic speed controllerMany optional tuning parts available 300058722

The TT-02 chassis is Tamiya's latest entry level 4WD full independent suspension assembly kit that offers ease of assembly and easy maintenance. The TT-02D is the Drift Spec variant that includes special parts to make it a fun to drive drifting machine.Features:Includes Super Driftech tires (24mm width) which feature a special resin compound suited to drift driving.Includes full ball bearings and CVA (oil-filled) Super Mini shocks.Tamiya Sport-Tuned Motor and Aluminum heat sink is included.Brake disc-shaped wheel hubs (silver color) and battery holder (blue) are metal-plated parts.The TT-02 chassis offers 2 different wheelbases and tread settings without the addition of Option Parts. It also supports 10 different gear ratios.The skid-shaped underside of the bathtub type frame minimizes contact with the road surface.Body is not included in this kit. Purchase a separately-sold body of your choosing and fit it to the chassis. 300058584

58607

The Grasshopper II is one of Tamiya's iconic radio control car kits from the late 1980's. It was an enhanced follow up release to the original Grasshopper kit. This re-release (2017) kit features a number of updates while keeping largely faithful to the original model. Its streamlined construction process makes this kit perfect for less experienced users and R/C veterans alike, while separately sold option parts can be used to enhance the model.About the ChassisA rugged ABS resin chassis is more than up to the stresses of off-road driving, and features lightweight durable plastic suspension arms, gearboxes and so on - the result is a lightweight and durable unit. Front swing axle and rear rolling rigid suspension combine for a responsive drive, while a fully enclosed gearbox is integrated with the rear axle and has a built-in differential gear to aid smooth cornering. One-piece wheels are paired with front grooved and rear spike tires for solid performance.Features:1/10 scale R/C 2WD buggy model assembly kit. Length: 400mm, width: 221mm, height: 139mm.The Grasshopper II body is molded in durable white polystyrene resin.Includes a driver figure for attachment to the body.Features a rugged ABS resin bathtub chassis to withstand the rough-and-tumble fun of off-road driving.Front swing axle and rear rolling rigid suspension setups are actuated by coil-spring friction dampers.Fully enclosed rear gearbox contains a differential gear to aid smooth cornering.Front ribbed tires give great straight-line grip, and rear spike tires provide powerful drive. They are matched with 8-spoke one-piece lightweight wheels.Compatible with tune-up parts such as standard Type 540 motors (requires nine 1150 ball bearings & one 850 ball bearing) and CVA mini oil dampers.Kit comes with 380 size motor.Includes the Tamiya ESCRequires 2-channel radio, Tamiya TS spray paint, 7.2volt battery, and compatible charger. 300058643

This R/C assembly kit recreates the 2021 Subaru BRZ (ZD8). We have faithfully recreated the BRZ body in lightweight polycarbonate material and have matched it up to our easy to assemble TT-02 chassis platform.About the Subaru BRZ (ZD8)The BRZ – Subaru’s first rear-wheel drive sports car, which debuted in 2012 - welcomed a second model in April, 2021. With the basic style carried over, the body features the low center of gravity with a 2.4-liter horizontally opposed four-cylinder boxer engine capable of 235hp. This engine offers higher power and torque and the best balance of easy handling and superior performance. It also employs the modular unibody automobile platform Subaru Global Platform (SGP) to facilitate improved rigidity and collision safety performance, plus Subaru’s original driving support system EyeSight.TT-02: Adaptable, balanced shaft driven 4WDThe shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gun metal color 10-spoke wheels and slick tires make for a racy finish.1/10 scale R/C model assembly kit. Length: 426mm, width: 188mm, height: 131mm. Wheelbase: 257mm.Polycarbonate body with front/rear polycarbonate light cases (NOTE: LED lights are not attachable)Black ABS plastic side mirrors.Differences from its sister car, the Toyota GR 86 are accurately captured: headlights, grille design, air intakes and more.10-spoke one-piece are paired with racing radial tires (Item 50419).Body requires cutting out, painting, attachment of parts, application of stickers, and other work.Includes 540 Type brushed motor.Requires: 2-channel radio, steering servo, ESC, 7.2-7.4volt battery & charger, and Tamiya PS paint. 300058702

The Alfa Romeo Giulia Sprint GTA Club Racer is showcased on the new and versatile MB-01 chassis platform. This time, the MB-01 is configured for the medium wheelbase with the specification "Midship Rear Motor/Rear Wheel Drive" (MR). The Alfa Romeo Giulia Sprint GTA was developed as a lightweight, tuned racing version of the two-door coupe Giulia Sprint GT and was launched in 1965. A total of 500 units were produced, and in the late 1960s, the factory car won several class championships in the European Touring Car Championship; it was also campaigned by other racing teams and garnered significant attention on the racetrack!The MB-01 ChassisThe compact 2WD MB-01 chassis offers a choice between three wheelbase types and front or rear-wheel drive. This model features a midship motor and rear-wheel drive. Without removing the battery, motor, and R/C equipment from the central frame, simply change the mounting direction of the pinion gears and steering linkages to switch between front and rear-wheel drive; for vehicles with rear-wheel drive, a low or high motor position can be selected. The four-wheel double wishbone suspension has a symmetrical structure and friction dampers. Standardized sections such as the motor mount, final gear, and suspension facilitate assembly and effective maintenance.R/C model kit in 1:10 scale. Length: 385 mm, Width: 167 mm, Height: 132 mm. Wheelbase: 225 mm (medium wheelbase).The shape of the Alfa Romeo Giulia Sprint GTA Club Racer is modeled from lightweight polycarbonate.Equipped with 60 mm tires at the front and rear.This kit includes decals to create a design inspired by numerous amateur club racing drivers.Includes a type 540 brushed motor and an ESC.Required to complete: 2-channel radio, steering servo, 7.2-7.4 volt battery with compatible charger, and Tamiya PS paint. 300058732

Tamiya's extensive line-up of touring car models has a welcome addition with the NSX (NC1)! This supercar is the second generation of the famed NSX model and was unleashed on an expectant public in 2015. Its lightweight body featuring aluminum and ultra-high tensile plate components is paired with the Sport Hybrid SH-AWD 4WD system, which teams up a longitudinally mounted midship 3.5-liter V6 twin turbo, and three electric motors. The result: next-generation performance with outstanding cornering.About the Model:This is a 1/10 scale R/C model assembly kit. The sleek form of the NSX (NC1) is accurately captured in durable polycarbonate, with separate molded side mirror and front light case (please note that light cases are not compatible with LEDs) parts. The TT-02 chassis features a shaft-driven 4WD system to offer easy handling and great customizability. Stickers are included to recreate both Acura (U.S.) and Honda (Japan) spec car exteriors, as are masking stickers for use when painting. Utilizes gun metal color mesh wheels (those used on Item 58510 Ferrari 599XX). A wide range of option parts is available to tune the TT-02 chassis. 300058634

This radio-controlled model assembly kit recreates the Audi 90 quattro Racing with a stunning and highly detailed polycarbonate body. The kit is based on the beginner friendly and highly customizable TT-02 chassis, which allows hobbyists to grow as their driving and building skills develop.About the Audi 90 quattro RacingThe Audi 90 quattro Racing flourished at American races in 1989. With a 2.2-liter inline-5 turbo engine capable of over 700hp, the 4WD quattro system gave it superior traction. Wider than the road car, its body had a large rear wing, and carbon and aluminum were largely used for its lightweight panels.1/10 scale R/C model assembly kit. Length: 446mm, width: 192mm, height: 127mm. Wheelbase: 251mm.The Audi 90 quattro Racing is made of lightweight, rigid polycarbonate.Separate red ABS plastic parts realistically depict distinctive side mirrors, a rear wing and air ducts.Newly designed white dish wheels (+4mm offset) are paired with slick tires.The model utilizes the shaft-driven 4WD TT-02 chassis which features superior adaptability and stability.Includes Item 51226 (Urethane Bumper L (TT-01, TGS)) to keep the body in top condition.Includes: 540-size Tamiya Torque Tuned brushed motor and Hobbywing produced ESC.Required to complete: 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS paints. 300058744

The Volkswagen Beetle needs little introduction to most people around the world. A record 21 million Beetles were produced over a production period spanning 60-plus years, and the distinctive rounded form of the car is a familiar sight. It was the brainchild of the famed German designer Ferdinand Porsche, and saw military service during the Second World War. The R/C model of this car was released in 19xx on the M-04 chassis and it now comes out on the modern M-06 chassis.About the ItemThis is a 1/10 scale R/C assembly kit.The polycarbonate body captures the instantly-recognizable form of the car. Metal-plated parts for front/rear bumper and side mirrors included to enhance realism.Metal-plated wheels also included.The M-06 chassis features a Rear-Motor, Rear-Wheel Drive setup and offers nimble handling performance. 300058572

This radio-controlled model assembly kit recreates the Volkswagen Golf II GTI 16valve. The kit is based on the beginner friendly and highly customizable BT-01 chassis, which allows hobbyists to grow as their driving and building skills develop. Like the full-size car it depicts, the chassis configuration on the MB-01 chassis is set up in the front motor, front drive configuration for unparalleled realism.About the Golf II 16VThe FF drivetrain Golf is one of Volkswagen’s most iconic cars. From its first appearance in 1974, Volkswagen Golf continued to develop and lead the worldwide compact car class. In 1986, the Golf II GTI 16V was added to the second-generation model Golf II lineup which had made its debut in 1983. With a 1,781cc inline-4 DOHC 16-valve engine, a tuned car took part in global rally races, and in the U.S. became a fan favorite hatchback of the 1980’s era.About the MB-01 chassisThe compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and a front- or rear- wheel drive system. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.1/10 scale R/C model assembly kit. Length: 383mm, width: 170mm, height: 138mm. Wheelbase: 239mm (Long).Polycarbonate body.Separate plastic parts molded in black realistically depict side mirrors and bumpers.Separate transparent parts capture headlights and taillights.Porous dish wheels are paired with radial tires.Includes 540-Type Torque Tuned brushed motor and Hobbywing produced ESC.Required to complete: 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger and Tamiya PS paint. 300058748

This is a R/C car replica of the 1992 Diebels-Alt sponsored Team Zakspeed Mercedes-Benz 190 E 2.5-16 Evo.II as it competed in the 1992 DTM racing series in Germany.Tamiya has faithfully reproduced this sleek racing machine in 1/10 scale on the TT-01 Type E entry-level on-road chassis. The TT-01E chassis incorporates many features to make it easy for the new R/C kit builder to assemble and learn from. In addition to the TT-01E being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Hop-Up Options available to increase the cars speed and performance.The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action. The low center of gravity, highly balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Gold color 6-spoke wheels are paired with racing slick tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E!Features:1/10 scale R/C model assembly kit. Length: 445mm, width: 184mm.The 190 E form is expertly depicted in durable polycarbonate, with separate molded mirror, wing and grille parts, as well as a plated Mercedes-Benz 3-star emblem.Marking stickers are included to recreate the numerous sponsor logos, car numbers, etc.6 spoke wheels (same design as Celica GT-Four '97 Monte-Carlo - Item 50770) are molded in gold, and paired with slick tires.The TT-01 Type-E chassis features shaft-driven 4WD system which offers easy handling.A wide range of option parts is available to tune the TT-01 Type-E chassis.Torque-tuned motor is included.Includes the Tamiya TBLE-02S ESC (brushless motor and brushed motor compatible)Requires 2-channel radio, Tamiya PS spray paint, 7.2volt battery, and compatible charger. 300058638

This is the latest release on the MF-01X chassis, and it features a rally version of a true classic car. The Volkswagen Beetle - thanks to its superlative reliability and uncomplicated upkeep - was a fixture on the global rally circuit from the 1950s through to the 1980s, and this model is inspired by such rallying Beetles. Whatbetter chassis to pair it with than the shaft-driven 4WD MF-01X, which is at home on a range of surfaces from road to flat dirt?About the ModelThis is a 1/10 scale R/C model assembly kit. Length: 397mm, width: 163mm.The model uses the 239mm L wheelbase.The playful form of the Beetle is captured artfully in polycarbonate. Bumpers and side mirrors are recreated using separate metal-plated parts.Front light pods and brand new rally-style stickers are included to give the model a rally car air. Rally block tires offer excellent grip.The MF-01X is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension.Power from the rear mounted motor is transmitted by gear differential to the rear wheels, and via a propeller shaft to the front. The chassis can be assembled into S and M wheelbases using separately sold propeller shafts.A host of Hop-Up Option parts are available to tune the MF-01X chassis. 300058650

This radio-controlled model assembly kit recreates the Audi R8 LMS 2008 with a stunning and highly detailed polycarbonate body. The kit is based on the beginner friendly and highly customizable TT-02 chassis, which allows hobbyists to grow as their driving and building skills develop.About the Audi R8 LMSBased upon the Audi sportscar R8 and conforming to GT3 regulations, the Audi R8 LMS was announced in 2008. A 5.2-liter V10 midship engine capable of over 500hp was mounted in a lightweight aluminum space frame. Body sections were modified, and the drivetrain was changed from 4WD to a rear-wheel drive system. From 2009 onward, this car was delivered to racing teams around the world and achieved many racing successes.Adaptable TT-02 Chassis offers balanced shaft driven 4WD:The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Mesh-type wheels are paired with racing slick tires.1/10 scale R/C model assembly kit. Length: 434mm, width: 194mm, height: 120mm. Wheelbase: 257mm.1.0mm-thick polycarbonate body.The efficient shaft-driven 4WD TT-02 chassis features superior adaptability and stability.Black 16-spoke wheels are paired with racing slick tires.Includes stickers and window masking tape for use in the painting process.Includes 540-Type Torque Tuned brushed motor and Hobbywing produced ESC.Required to complete: 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger and Tamiya PS paint. 300058749

Based on 1-seater buggies seen tearing-up dirt tracks across the U.S. in the 80's, the Grasshopper first made its appearance in R/C stores in 1984. Boasting easy assembly and easy control, the lightweight Grasshopper proved an instant hit as the perfect entry level R/C kit. Also compatible with a full range of optional parts such as oil dampers, 540 motor and ball bearings, the Grasshopper was an entry level car that could keep up with the owners’ driving experience. Packed with all the fantastic features of the original kit, this fun LIMITED EDTION “Black Edition” celebrates the 2WD buggy as it’s fun to blast around the park. Whether it was your first or will be your first, the Grasshopper guarantees to please R/C builders across the globe!The perfect combination of simple assembly and tough exterior is what made the Grasshopper so special. Durable plastic body is fastened to bathtub resin monocoque chassis by screws, creating a solid frame that can absorb any type of rough handling. Off-road tracks can be tackled with ease thanks to coil spring dampers, and independent swing axle front and rigid axle rear suspension. Diff loaded sealed gearbox keeps out the dirt and stones for smooth driving and cornering. Paddle style rear tires and grooved front tires combine with 3-piece assembly type wheels for excellent grip performance on dirt tracks. Half-body driver figure adds a final addition to a fun off-road R/C car. 300047522

Die sportliche Weiterentwicklung des TT-02!Bei dieser sportlichen Weiterentwicklung des TT-02-Chassis wurde die effiziente, wellengetriebene Allradantriebseinheit mit neu entwickelten Teilen ausgestattet und bietet dem Nutzer die Möglichkeit, umfassende Einstellungsanpassungen vorzunehmen – ideal für den Rennsport! Es ist mit langen, umkehrbaren Querlenkern und stabilen Metall-Aufhängungshalterungen ausgestattet. Das Heck ist mit 3° Vorspur eingestellt. CVA-Öldämpfer sind an speziell entwickelten, 3,0 mm dicken FRP-Dämpferhaltern befestigt, wobei der optimale Dämpferwinkel und der optimale Rückprallhub für hervorragende Straßenlage sorgen. Obere Querlenker mit Spannschrauben und Lenkgestänge ermöglichen eine mühelose Einstellung von Sturz und Vorspur vorne. Der Leistungsverlust wird durch den Einsatz von Vollkugellagern sowie Metallgelenken und Antriebswellen minimiert.Besondere KomponentenUmkehrbare Querlenker CVA-Öldämpfer FRP-Dämpferhalterungen vorne und hinten (neu entwickelt) Metall-Aufhängungshalterungen (mit 3° Spur innen hinten) Metall-Radachsen, Getriebegelenke und Antriebswellen Vollkugellager Spannschrauben-Oberarme und Lenkgestänge Sechskant-Radnaben aus Druckgussmetall3 mm dicke FRP-Dämpferhalterungen vorne/hinten (NEUES Teil)Metall-Aufhängungshalterungen (NEUES Teil)Artikel 51297 Umkehrbare Aufhängungsarme (lang)CVA-ÖldämpferSpreizbolzen-Vorder-/Hinterrad-OberarmeSpreizbolzen-SpurstangenDrehmomentoptimierter Motor Typ 540Artikel 51023 Mittel-schmale Radial-RennreifenMetall-Gelenkköpfe, Metall-AntriebswellenSechskant-Radnaben aus Aluminiumdruckguss 300058600

Tamiya is proud to add a new version of the Alpine A110 with an orange Jägermeister livery to our M-06 chassis series. The Alpine A110 was a French compact coupe featuring a lightweight FRP body based upon a steel backbone, rear-wheel drive chassis with the rear-mounted inline-4 engine positioned longitudinally. Production continued from its debut year 1963 until 1977, and the A110 attained fame after victory in the 1971 rally in Monte Carlo. In 1973, this car become the first World Rally champion and its Jägermeister orange livery version achieved a class victory in German circuit races.About the ModelThis is a 1/10 scale R/C model assembly kit. Length: 395mm, width: 168mm, height: 121mm. Wheelbase: 210mm.The lightweight, durable 1.0mm thick polycarbonate body realistically captures the distinctive 2-door coupe form in style.Separate parts authentically depict headlights, front/rear bumpers and side mirrors.The model is based upon the rear-wheel drive M-06 chassis (210mm wheelbase setup) featuring a rearmounted motor.Dish wheels molded in silver are paired with 60D radial tires (Item 50683) at front and 60D super radial tires (Item 54999) at rear.Stickers are included to recreate sponsor logos, race numbers and more. Masking stickers will aid in the paint job.A wealth of Hop-Up Option parts is available to tune the M-06 chassis to your needs. 300058708

This is a limited-edition version of the Citroën DS . (Item 58734) It includes a pre-painted body, cut out wheel arches and premade body mount holes that makes the body construction process simpler for beginner builders. The kit recreates the Citroën DS which made its debut in 1955 and caught people’s attention with its innovative structure and style. Over 1,450,000 were sold up to 1975, and it became one of the better- known cars of the 20th century. This car was used as the official car for the President of France and achieved the overall championship in 1966 global rallies. The version recreated in this assembly kit recreates the early-period model featuring two rounded headlights. The polycarbonate body sits on top of the MB-01 chassis configured in the long wheelbase and front motor / front wheel drive (FF) configuration.The MB-01 ChassisThe compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and front- or rear- wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.1/10 scale R/C model assembly kit. Length: 419mm, width: 198mm, height: 137mm. Wheelbase: 239mm (Long wheelbase).Polycarbonate body pre-painted in Tamiya Blue (PS-4). Windows are tinted in Tamiya Smoke (PS-31).Just like the actual vehicle, the front tread is wider than the rear tread.Features 60mm front and rear tires.Includes ESC and 540-brushed type motor.Required to complete: 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger.NOTE: Body requires cutting out, application of stickers, and other work. 300047502

Go wild!The Wild Willy 2 is a reproduction of the popular original Wild Willy from the mid 80s. The new Wild Willy has an all new chassis and larger tires allowing it to tread over rough terrain. Of course, the Wild Willys trade mark is the animated wheelie capability thanks to an all new wheelie bar.WR-02 Chassis:The WR-02 chassis features a heavy duty monocoque which has side frames to increase rigidity. R/C unit, motor, and battery pack are positioned along the centerline of the chassis and the motor's power is delivered to the rear wheels via a fully-enclosed gearbox equipped with a differential. A wheelie bar is fitted to enable exciting, wheels in the air driving action. 4-wheel double wishbone suspension and 2-piece steering tie-rod offer smooth steering response. Tires/wheels and the gearbox/motor come pre-assembled for ease of assembly.Features1/12 Scale?Length: 345mm, Width: 270mm, Height: 270mmWheelbase: 170mmWeight: 1,360g (not including R/C units and battery pack)?Type 540 MotorRear-Wheel DriveTire Width/Diameter: (F/R) 113/70mm?Tread: 265mm (Front), 270mm (Rear)Monocoque Frame Chassis?3-Bevel Differentials2-Piece Steering Tie-Rod4-Wheel Double Wishbone SuspensionGear Ratio=1:18.3WARNINGS:Before you start assembling, read and understand all the instructions. If a child assembles the model, a supervising adult should also have read the building instructions.Tools including knives are used when assembling the kit. Special caution should be exercised to avoid injury. If you encounter any difficulties during assembly, ask an adult to supervise the work or ask a model builder with RC experience or a specialist dealer.Use tools only for the intended purpose. Incorrect use may result in injury.If you use paint and/or glue (not included in the kit), follow and follow the instructions provided. Keep kit away from small children. Avoid children taking any components into their mouths or pulling plastic bags over their heads. 300058242

The Tamiya line of racing truck models welcomes a newcomer in the form of the Actros raced in the 2019 ETRC, and which carried the team to 4th place on the year, with veteran Hungarian driver Norbert Kiss 6th overall in the drivers’ standings. The model is based upon the proven shaftdriven 4WD of the TT-01 Type-E chassis.About the ModelThis is a 1/14 scale R/C model assembly kit. Length: 441mm, width: 188mm. Wheelbase: 257mm.Please note that in Japan, this model will have a pre-painted body with pre-cut wheel arches.The racing Actros form is captured by a brand new three-part polycarbonate body with components for body, cab and coupler.Separately molded plastic parts depict side mirrors, front and rear light cases, plus the grille emblem.Includes stickers recreating the sponsors and livery.Silver color molded wheels and 70mm diameter radial tires are specifically designed for racing truck models.The TT-01 Type-E chassis features shaft-driven 4WD with easy handling 300058683

No Guts No Glory! Limited edition of the legendary TAMIYA model The Frog from 1983. Top equipped and with many revised parts, the Frog has the charm of the original and modern technology.Features:Electric motor type 540electronic speed controller2WD rear-wheel driveIndependent wheel suspensionOil pressure shock absorbersGrooved front tyres and pin studded rear tyresPolycarbonate body 300058354

Tamiya welcomes another R/C kit using the MB-01 chassis – this time, long wheelbase and front motor / front wheel drive (FF). This R/C kit recreates the Citroën DS which made its debut in 1955 and caught people’s attention with its innovative structure and style. Over 1,450,000 were sold up to 1975, and it became one of the betterknowncars of the 20th century. This car was used as the official car for the President of France, and achieved the overall championship in 1966 global rallies. This kit recreates the early-period model featuring two rounded headlights.Product detailsAbout the ModelThis is a 1/10 scale R/C model assembly kit. Length: 419mm, width: 198mm, height: 137mm. Wheelbase: 239mm (Long wheelbase).The form of the Citroën DS is recreated in lightweight polycarbonate. Just like the actual vehicle, front tread is wider than the rear tread.Features 60mm front and rear tires. Use 60D tires when changing tires.Please note that export model bodies are not pre-painted (only domestic model bodies are pre-painted).About the MB-01 chassis?The compact, 2WD MB-01 chassis gives a choice of three types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.WARNING!Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model.When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury.Read and follow the instructions supplied with paints and/or cement, if used (not included in kit).Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.Warning! Not suitable for children under 14 years. 300058734

Here is another R/C kit with the MB-01 chassis – this time, middle wheelbase and midship rear motor / rear wheel drive (MR). This R/C kit recreates the Alfa Romeo Giulia Sprint GTA Club Racer. The Alfa Romeo Giulia Sprint GTA was developed as the lightweight, tuned race version of the 2-door coupe Giulia Sprint GT and released in 1965. 500 units were produced and in the late 1960s the works car became class champion several times in the European Touring Car Championship; also run by other racing teams, it caught many an eye at the racetrack.Product detailsThis is a 1/10 scale R/C model assembly kit. Length: 385mm, width: 167mm, height: 132mm. Wheelbase: 225mm (Middle wheelbase).The form of the Alfa Romeo Giulia Sprint GTA Club Racer is recreated in lightweight polycarbonate (prepainted).Features 60mm front and rear tires. Use 60D tires when changing tires.This kit includes stickers to create a design inspired by the numerous club racers driven run by amateur drivers.About the MB-01 chassis?The compact, 2WD MB-01 chassis gives a choice of three types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low orhigh motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. 300047501

Tamiya is excited to announce this model on the new Tamiya standard for drift driving, the TT-02D chassis. The R33 was the fourth generation of the famous Nissan Skyline GT-R; the RB26DETT 2.6-liter inline-6 engine was a carryover from its R32 predecessor, and this time the twin turbo powerplant was fitted with a 16-bit engine control unit. The vehicle was 13cm longer than the R32, with a wheelbase extended by 10.5cm. The body was also widened and strengthened, and given an adjustable rear spoiler. Other features on this high-powered car included ATTESA E-TS 4-wheel drive system and Brembo brakes.About the ModelThis is a 1/10 scale R/C model assembly kit.The distinctive, powerful body of the R33 is recreated in durable polycarbonate.The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02.Features CVA oil dampers, full ball bearings, a Sport-Tuned motor and aluminum motor heat sink.Stickers and masking stickers are included in the kit.Mesh-type wheels are paired with super driftech tires.Features1/10 scale kit modelWheelbase 257mmDetailed polycarbonate body (incl. window masking film for painting)Robust TT-02D chassis (drift tuned)CVA oil pressure shock absorbersBall-bearingAluminum radiatorDrifttech tires4WD shaft drive with protected drive trainIncl. electronic speed controllerPowerful 540 SPORT TUNED engine 300058604

The legendary Hornet gets a dramatic makeover with this Jun Watanabe color scheme that pairs a black-spotted white body with pink tires and purple chassis, bumper and side guard parts. Damper springs in white add a nice flourish to the model, as do other details like the pink 4mm wheel nuts.The Hornet is built around a simple yet robust chassis with an ABS box type frame and durable front swing axle and rear rolling rigid suspension setups. The rear oil dampers give it the muscle to take on tough surfaces, while the gearbox is a sealed design to help keep out dirt and debris; the differential gear inside ensures smooth cornering. Three-piece wheels are employed front and rear and paired with front grooved and rear pin spike tires. Black tires are also included in the kit.Length: 400mm, width: 230mm, height: 150mm. Weight: 874gWheelbase: 251mmGround clearance: 16mm.Type 540 motorRear-wheel drive.Tread: 172mm (front), 185mm (rear)3-bevel differential gear2-piece steering tie-rodIndependent swing axle front suspensionRolling rigid axle rear suspensionGear ratio = 8.2:1Includes 540-type brushed motor and ESC.Required to complete: 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS paint. 300058527

This improved version of the TT-02 chassis contains a wealth of tuning parts and some new parts to make it raceable. The included racing parts improve the suspension, the engine mount, the drive shafts, the differential exits etc.. The suspension contains metal parts and CVA oil dampers. The versatility and simple handling of the TT-02 are retained.Included tuning parts:Newly developed rear axle carriers made of aluminium with 3 degree toe-in aluminium engine bracket- 300053159 4mm Aluminum Flange Lock Nut (Blue)- 300053642 5mmAluminum Ball Connector (Blue)- 300054247 3x18mm Aluminum Turnbuckle Shaft (Blue) x2- 300054500 TT-02 High-Speed Gear Set (68T)- 300054501 TT-02 Aluminum Propeller Shaft 54502 TT-02 Aluminum Propeller JointTechnical Details:- RC kit in scale 1:10- Newly developed rear axle carriers with 3 degree toe-in offer greater stability in curves.- Better smooth running due to aluminium shaft with axle mounts.- CVA oil dampers in silver for the first time on this model.- Black springs are used.- Fashionable 10-spoke rims are included.Please note that body, battery, engine and RC equipment are not included. Warnings: Before you begin assembly, you should read and understand all instructions. If a child is assembling the model, a supervising adult should also have read the assembly instructions. Tools, including knives, are used to assemble the kit. Special care should be taken to avoid injury. If difficulties arise during assembly, ask an adult to supervise the work or a model builder with RC experience or a specialist dealer. Only use tools for their intended purpose. Incorrect use may result in injury. If you use paint and/or glue (not included in the kit), follow the instructions provided with the kit. Keep the kit away from small children. Do not allow children to put any components in their mouths or pull plastic bags over their heads. 300047326

Here is a new entry to the X-SA series of models, and yet another Tamiya classic: the Midnight Pumpkin. This is a finished model of the Midnight Pumpkin (as it appeared in Item 58547); all you require to get going with this adaptable, lightweight and beginner-friendly 2WD monster is your own transmitter, receiver, servo and a powersource!Features:This is a 1/12 scale finished R/C model. Length: 385mm, width: 290mm, height: 260mm.Features a stylish, tough styrene body, which comes with markings already applied.The durable, easy-assembly 2WD chassis employs a box type frame with front swing arm independent and rear rolling rigid suspension setups.Big 115mm diameter semi-pneumatic tires on yellow wheels offer a dynamic drive on even the toughest of surfaces.The sealed rear gearbox protects the differential inside from dust and dirt, for a consistently smooth drive.A rear wheelie bar supports the model for wheels-in-the-air action when you slam on the throttle.Comes with the TEU-105BK ESC.Requires separately sold R/C equipment, battery pack and charger. 300046705

Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Audi V8 touring car with a 456hp 3.6-liter V8 which graced the DTM (Deutsche Tourenwagen Masters) in 1991. That season, it took four victories overall and carried Frank Biela to the drivers’ title.About the ModelThis is a 1/10 R/C model assembly kit.The powerful, imposing body is molded accurately in lightweight and durable polycarbonate.Stickers are included to recreate the markings for the no.45 car driven by 1991 champion Frank Biela. Masking stickers will aid in the paint job.Two-piece mesh wheels (Item 50548 design) have silver color rims and gold color spokes. They are paired with racing slick tires.The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly.4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride.A plethora of Hop-Up Option parts is available to tune the TT-02 chassis to your needs. 300058682

4WD kit modelMF-01X Chassis,Elect. Speed controller540 torque-tuned electric motorPolycarbonate body with add-on partsRally-block tyresSuspension strutsIndependent suspensionFrame chassisWheelbase 239mmLight insertsManual 300058714

This high-performance front-wheel-drive RC chassis kit is based on a rigid monocoque structure with an underbody and upper frame elements. It offers responsive handling and straightforward maintenance of components such as the easily accessible differential, which can be removed from the underside with minimal disassembly. The C.V.A. (Constant Volume Adjustable) oil damping system, combined with 4-wheel double wishbone suspension, features specialised long arms and steering linkage components to provide a wide range of adjustment options. A silky-smooth drivetrain utilises full-length ball bearings, an oil-filled gear differential and universal drive shafts. It can be assembled with a wheelbase of 225 mm (M) or 239 mm (L), making it compatible with existing Tamiya M-chassis body kits of the appropriate size.Special components:Monocoque frame chassis (with removable lower section)Long suspension armsCVA oil dampersFull ball bearingsGear differentialUniversal drive shaftsHigh-torque servo guard1:10 scale R/C chassis kit. Length: 332 mm, width: 164 mm.At the heart of the chassis is a one-piece monocoque with integrated upper frame members, similar to that of the TA-07 Pro. It is designed for excellent rigidity whilst allowing for easy maintenance.Choose between 2 different wheelbases (M: 225 mm, L: 239 mm) by simply changing the mounting orientation of the rear wishbones.The newly designed front and rear suspension utilises long wishbones for an ideal lever ratio in combination with long steering linkage components. The rear track width can be easily adjusted using spacers.The 4-wheel double wishbone suspension is fitted with CVA oil dampers.The M-07 is powered by the oil-filled TA06 gear differential. It is combined with universal drive shafts and full ball bearings.Compatible with standard square battery packs in accordance with IFMAR regulations (Li-Po cell type).Compatible with low-profile servos.The chassis has been designed to provide easy access to the anti-roll bars (sold separately) – for quick, precise adjustments that are crucial on the racetrack.The body mounts feature a new, reinforced design for a more secure attachment of the body.The chassis provides the driver with excellent ‘feedback’, allowing you to clearly recognise the effect of your setup changes. 300058647

The Supra was the fourth generation of Toyota (JZA80) which was announced as a Toyota’s flagship sportscar in 1993. Its top grade RZ model employed a 3-liter inline-6 twin turbo engine capable of 280hp, 6-speed transmission, 4-wheel double wishbone suspension and ventilated disc brakes for front and rear. The muscular form and high-spec performance mesmerized fans all over the world and achieved success in motorsports races.The 2WD BT-01 chassis gives a choice of two types of wheelbase (257mm or 251mm), and front- or rear- wheel drive system.Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars.?(Six setups are available in total.)Product detailsThis is a 1/10 scale R/C model assembly kit.Length: 457mm, width: 185mm, height: 135mm. Wheelbase: 257mmThe lightweight, pre-painted durable 1.0mm-thick polycarbonate bodyThe 2WD BT-01 chassis gives a choice of two types of wheelbase (257mm or 251mm), and front- or rear- wheel drive system.Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars.?(Six setups are available in total.)The 4-wheel double wishbone suspension features symmetrical structure and friction dampers.Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.Many Hop-Up Option parts for TT-chassis cars can be used to fine-tune setupIncluding ESC 300047505

The long-running and popular M-Chassis series welcomes a new member with the M-08 Concept chassis, which employs a midship motor, rear-wheel drive layout for superior rear traction, plus a main frame split into front and rear sections.This is a 1/10 scale R/C model assembly kit.The chassis is split into front (suspension and servo) and rear (motor and battery) sections. It can beassembled into three different wheelbases: S (210mm), M (225mm) or L (239mm).Rear-midship motor powers rear wheels via a differential in the MR setup.Oil-filled differential gear is the TA06 design, which was also employed on the M-07 Concept chassis.Features proven M-07 Concept designs: suspension arms, uprights, suspension mounts and aluminum parts.Includes CVA oil dampers, universal drive shafts, full ball bearings and hi-torque servo saver.Comes with new front suspension mounts (0 degrees) and hub carriers (2 degrees) for a total caster angle of 2 degrees, and smooth cornering.Compatible with M-06 Chassis bodies.Compatible with M-07 Concept Hop-Up Option parts such as Aluminum Rear Suspension Mount (Skid Angle Adjustment), Aluminum Rear Uprights and Low-Friction King Pin Pipes. 300058669

This is an updated version of the classic Plasma Edge buggy body. It features new stickers and a tweaked body design. It is mounted on the easy-to-build and maintenance TT-02B chassis. The TT-02B uses the TT-02 as its base, adding longer suspension arms, CVA shock units, and buggy bumpers to give it great off-road performance. Of course, it retains the TT-02's excellent drivability and ease of assembly and maintenance, while motor cooling ducts and receiver case add to the model's durability.FeaturesTorque-tuned motor is included!The TT-02B Chassis is the buggy evolution of Tamiya's popular 4WD entry level unit, the TT-02 Chassis.Bathtub-type frame has longitudinal battery and R/C mechanism placed flat for low center of gravity.4-wheel double wishbone suspension features long arms and white color CVA shock units, and is combined with high-grip square spike tires to give excellent traction.Features fluorescent yellow star-dish wheels.Includes stickers to decorate the body, plus masking stickers for use when painting.Front and rear gearboxes have differentials to ensure smooth cornering 300058630

The Super Clod Buster is back! This monster truck features a body that was inspired by classic pick-up trucks from the 1980"s, giving it a realistic appearance. The front grille, air intake and roll bar are recreated with metal-plated parts. The truck also features a twin-motor dual gearbox 4WD drivetrain, 8 coil spring dampers and massive 165mm diameter tires, as well as a 4-wheel drive steering system to help the model navigate tight corners.Features:Scale 1/10Shock Damper friction damper1/10 scale R/C assembly kitSticker sheet includedSpecial features: optional 4-wheel steering3-channel radio recommended for 4-wheel steering operationThe Super Clod Buster body has been reproduced in injection-molded plasticHighly-durable bathtub type monocoque chassis frameFront/rear trailing arm suspension with 8 coil spring dampersFront/rear sealed gearboxes are equipped with differential gearsKit includes TEU-103BK ESC. (Original kit included a mechanical speed controller)Two 540 motors included 300058502

The Comical Hotshot is another model in the TAMIYA Comical series.The model is on a GF-01 4WD all-wheel drive chassis in the GF-01CB version. The 1/10th scale Hotshot is very off-road capable and features a powerful 540cc electric motor, CVA oil shocks and a monocoque chassis. With the included electronic speed controller, brushless and brushed motors can be operated.The polycarbonate body is already cut out and pre-painted in PS-2 red. Lamp housings are attached to the front bumper, which can be equipped with 5 mm LEDs (lighting not included in the kit).- Kit model in scale 1:10- 4WD all-wheel drive, directly via gearwheels- GF-01CB chassis in a special version- Red pre-painted (PS-2) polycarbonate body in the style of the legendary Tamiya Hotshot design- 2-piece rims- Hollow section tyres with block profile front and rear (width/diameter: front 45/99 mm, rear 55/99 mm)- inclusive driver figure- Front bumper with 2 different front headlights / fog lights (LEDs available separately)- CVA oil pressure shock absorber- Wheelie bar at the rear- Incl. electronic speed controller and 540cc motorWARNING:Before you start assembling, make sure you have read and understood all instructions. If a child is assembling the model, a supervising adult should also have read the assembly instructions.Tools including knives are used when assembling the kit. Extra care should be taken to avoid injury.If difficulties arise during assembly, ask an adult to supervise the work or a modeller with RC experience or specialist dealer.Use tools only for their intended purpose. There is a risk of injury if used incorrectly.If you use paints and/or glues (not included in the kit), observe and follow the instructions enclosed with them.Keep kit away from small children. Prevent children from putting any components in their mouths or pulling plastic bags over their heads. 58685

Tamiya is delighted to announce the release of the Porsche 911 GT3 (992) as a 1/10 R/C model assembly kit based on our popular TT-02 chassis. The 7th generation model, Porsche 911 GT3 featured double-wishbone front suspension – changed from MacPherson strut – and a horizontally opposed 6-cylinder engine. Lightweight and aerodynamic design extensively improved its performance. Carbon fiber reinforced plastic front hood, which was employed for production vehicles for the first time, gives lightweight design. Also, hanging type wing stay provides greater downforce and lower drag.Product detailsThis is a 1/10 scale R/C model assembly kit. Length: 467mm, width: 188mm, height: 131mm (tentative).Wheelbase: 251mm (S-size wheelbase).The lightweight, durable polycarbonate body authentically captures the powerful form of the Porsche 911 GT3 (992) in style with separate polycarbonate rear wing and light cases.Separate plastic parts molded in black realistically depict side mirrors and wing stays.The model utilizes the shaft-driven 4WD TT-02 chassis which features superior adaptability and stability.Dark gun metal color dish wheels are paired with racing radial tires (Item 50419).Includes Urethane Bumper L (TT-01, TGS) (Item 51226).Comes with stickers and masking stickers for use in the paint job. 300058712

The Mercedes-Benz 190E in the "debis" version drove in the 90s in the German DTM racing series.The 1/10th scale TAMIYA model on the TT-01E chassis has a powerful torque tuned electric motor and all-wheel drive. This combination ensures fast and uncomplicated driving pleasure. The robust and detailed polycarbonate body and decal sheet are perfect for RC hobbyists.FeaturesKit model1:10 scaleTT-01 Type E Chassis4WD four-wheel drive via cardan shaftIndependent front / rear suspension4fold strutsDimensions: length 445 mm, width 184 mmWheelbase 257 mmSuper detailed polycarbonate body (transparent) with attachmentsMercedes-Benz star and radiator grille made of chrome-plated plasticRear spoiler and mirror made of plastic faithfully reproduced6-spoke rims with 26 mm slick tiresTAMIYA Torque Tuned Motor includedElectronic controller 300058656

The Fighter Buggy R/C series of products was developed by Tamiya for use in the popular German buggy races for beginners which started in 1996 and organized by Tamiya’s leading importer in Europe. It has been 10 years since a new product was developed for this series and thanks to our design team, we have come up with the next big thing for beginners!Enter Fighter NXGEN! This is an R/C model assembly kit inspired by full size single seater racing buggies popular in the United States of America. The new DT-04 - a 2WD rear-wheel drive buggy chassis - of course offers ease of assembly and lively performance, which is a characteristic of this series. The product name "NXGEN" is based upon the English word "Next Generation" and as you can guess from the name, it gives improved off-road performance, and a wealth of setup possibilities compared to its predecessors. Also, front and rear suspension arms, gears and gearbox are shared from DT-02 and DT-03 chassis cars. Furthermore, many option parts from DT-02 and DT-03 chassis can be used for this new chassis iteration.The body is a piece to behold as it is comprised of injection molded white polycarbonate. Like the BBX (item 58719), the body components are modular pieces that are screwed onto the main chassis. Unlike the BBX, the body components as previously mentioned are injection molded white polycarbonate rather than vacuum formed clear sheet polycarbonate. The result is an easier assembly process for beginners and veterans alike without having to paint the body. All that is needed is the application of stickers!1/10 scale R/C model assembly kit. Length: 385mm (with 265mm wheelbase) / 395mm (with 280mm wheelbase), height: 120mm, width: 248mm.Two wheelbases can be selected: 265mm for emphasis on handling or 280mm for emphasis on stability. Reassemble the front section (suspension arms) to switch between two different wheelbases.The distinctive body features multiple body panels connected to pipe frames; a design inspired by full size racing buggies.Newly designed 2WD rear-wheel drive chassis features durable bathtub frame.The chassis has an inline battery pack position, and a rear-mounted motor to give the rear wheels plenty of traction.The sealed gearbox has a built-in gear differential for smooth cornering and helps keep out dust and dirt.Side pontoons have the ESC mounted on the left and the receiver on the right.Features 4-wheel independent double wishbone suspension with long arms and employs CVA oil bypass dampers.Front suspension arms have a skid angle of 22.5 degrees.The 3-piece steering tie-rod gives true steering feel. (It is the first time to employ a 3-piece steering tie-rod design in this series.)Access the battery pack from the car top. Turn the hood lever and remove the side pins then lift the roof. After that, slide the driver figure forward to access the battery.Ribbed tires are on the front, and grippy square spike tires on the rear.Features hex hubs on the front and rear to allow attachment of different wheels.Features injection molded polycarbonate, glass filled nylon, and nylon parts. (PC, PA-GF, and PA respectively)Rear damper attachment positions and rear upper arms can be changed for tuning the car.Comes with two sticker marking options and one driver figure.Many separately sold DT-02/DT-03 option parts are compatible, for the DT-04, that provide a wealth of options for fine-tuning.Includes: 540-size Tamiya Torque Tuned brushed motor and Hobbywing produced ESC.Required to complete: 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya paints to paint the driver figure. 300058741

Inspired by the Ford Shelby GT350R-C, the Ford Mustang GT4 was designed to compete in GT4 category racing across the world. Powered by a 5.2-liter V8, and sporting a 6-speed sequential paddle shift transmission, Multimatic suspension and aerodynamically refined body, the Mustang GT4 cuts a thrilling figure. Now, it makes a triumphant entrance into the Tamiya range of R/C models. The TT-02 chassis is adaptable and fun todrive – a great choice to get started with R/C touring cars!About the ModelThis is a 1/10 scale R/C model assembly kit. Length: 459mm.The muscular form is captured in polycarbonate, and was designed with access to the actual car’s CAD datafor superb accuracy. Front and rear light cases are • Wheel arches are pre-cut out for a simpler body assembly experience.The beginner-friendly, highly adaptable TT-02 is a versatile and easy to maintain shaft-driven 4WD chassis.Separately molded plastic components depict rear wing and side mirrors.Racy 10-spoke wheels are molded in gun metal and paired with slick tires.Stickers are included to create an original livery, as are masking stickers for use when painting.An extensive TT-02 option parts line-up offers a number of opportunities to tune your car. 300058664

Tamiya is delighted to announce the appearance of another classic racing car on our popular TT-02 chassis, this time the Toyota Celica GT-Four RC (ST185). The Toyota Celica GT-Four RC was developed as a homologation car to take part in global rally races, and in 1992, 5,000 units were sold around the world. With its curved, powerful body, this car employed a 2-liter turbo engine with metal turbines and water-based intercooler system, which was capable of 235ps. The 4WD system utilized a center viscous coupling and a Torsen differential at the rear for superior controllability and traction. In 1993 global rally races, the Celica GT-Four (ST185) brought both Manufacturer’s and Driver’s Championships to Toyota for the first time.Product detailsThis is a 1/10 scale R/C model assembly kit. Length: 450mm, width: 187mm, height: 136mm. Wheelbase: 257mm.The lightweight, pre-painted durable 1.0mm-thick polycarbonate body authentically captures the Toyota Celica GT-Four RC (ST185) in style.The model utilizes the efficient shaft-driven 4WD TT-02 chassis which features superior adaptability and stability.5-spoke wheels are paired with tread pattern racing radial tires.Comes with stickers and masking stickers for use in the paint job. 300047500

TAMIYA presents the reissue of the Mini Cooper Monte Carlo '94, first introduced in 1995, on the innovative M-05 chassis. The M-05 chassis is a further development of the popular M-03 and M-04 series. The steering servo and speed controller are positioned to achieve optimum weight distribution and a lower centre of gravity. In addition, 3-piece adjustable steering linkage ensures precise steering response. Stable handling on fast straights and in tight corners ensures plenty of RC driving fun. Numerous M-03 tuning parts are compatible with the M-05 chassis of the Mini Cooper, thanks in part to the variable wheelbase.Features:Includes decal sheet Three-piece steering linkage allows for precise steering manoeuvres 60D radial tyres with silver Minilite rims Robust polycarbonate body Independent suspension with double wishbones 300058483

This radio-controlled model assembly kit recreates the Porsche 911 GT3 R (992) with a stunning and highly detailed polycarbonate body. The kit is based on the beginner friendly and highly customizable TT-02 chassis, which allows hobbyists to grow as their driving and building skills develop.The full-size Porsche 911 GT3 R (992) is a car which was developed to conform to GT3 race regulations. It is used by customer teams around the world that compete globally in races such as the Fanatec GT World Challenge Powered by AWS and the SRO Motorsports Group in Europe, North America, Asia, and Australia. The harmonious shape of the 911 emphasizes its heritage while combining it with sophisticated new efficiency. Functionality is paramount too! The body is made of particularly lightweight carbon to reduce vehicle weight. The result: increased agility and precision unparalleled throughout GT racing. The perfect starting point for success on the racetrack. With its increased displacement, the heart of the vehicle – the water-cooled six-cylinder naturally aspirated boxer engine – can achieve up to 416 kW (565 hp). Its purpose is clear: race to win.Adaptable TT-02 Chassis offers balanced shaft driven 4WD:The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Mesh-type wheels are paired with racing slick tires.1/10 scale R/C model assembly kit. Length: 479mm, width: 188mm, height: 127mm (approximate). Wheelbase: 251mm (short).Polycarbonate body with separate polycarbonate rear wing and light case details.Separate plastic parts molded in black realistically depict side mirrors and wing stays.The model utilizes the shaft-driven 4WD TT-02 chassis which features superior adaptability and stability.Black mesh-type wheels are paired with slick tires.Includes Item 51226 (Urethane Bumper L (TT-01, TGS)) to keep the body in top condition.Includes stickers and window masking tape for use in the painting process.Includes 540-Type Torque Tuned brushed motor and Hobbywing produced ESC.Required to complete: 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger and Tamiya PS paint. 300058745

The BMW 318i STW Warsteiner is a classic car in race design, and the TAMIYA model perfectly reproduces all the details. It is based on the TT-01 Type E chassis, whose 4WD drive with central shaft, double wishbones and suspension struts on all four wheels ensure driving pleasure and traction. Thanks to the perfect assembly instructions and precisely manufactured components, assembly takes just 1-2 hours (excluding painting). The TAMIYA BMW 318i STW can be tuned into a competition-ready RC racer with numerous optional tuning parts.Features:TT-01 Type E tub chassis1:10 scaleRobust and detailed polycarbonate bodyCentral drive shaft4WD all-wheel driveFront/rear bevel differentialIndependent suspension with friction dampersTEU-104BK electronic speed controller (not LiPo-compatible)Type 540 electric motor 300058516

Tamiya’s line of drift spec TT-02D chassis cars welcomes this model of the iconic GT-R (R32), the thirdgeneration Skyline which went on sale in 1989 in Japan and came loaded with technological advances like HICAS 4-wheel steering and ATTESA E-TS all-wheel drive. Its RB26DETT 280 PS engine was designed for the race scene.About the ModelThis is a 1/10 scale R/C model assembly kit. Length: 452mm.LEDs are included in export versions of the kit only.The Skyline GT-R (R32) form is recreated by a durable and lightweight polycarbonate body (originally used in Item 58428).Separately molded parts are included in the kit to recreate side mirrors and rear wing.Features marking stickers to decorate the car.The TT-02D is the specially tuned drift spec of the popular shaft-driven 4WD entry chassis, the TT-02. As such, it is compatible with TT-02 option parts.Comes with 24mm width drift-spec tires on mesh wheels, CVA oil dampers, full ball bearings, a sport-tuned motor and aluminum motor heat sink. 300058651

Tamiya is delighted to announce the release of this updated version of another of our back-catalog classics, the Monster Beetle (Item 58060, from 1986). This model features a stylized version of the timeless Volkswagen Beetle body, mounted on an all-action 2WD chassis fitted out with big tires for rough-and-tumble off-road fun. This new model promises to be great fun for both beginners and Tamiya veterans alike!About the Model“ This is a 1/10 scale R/C model assembly kit. Length: 410mm, width: 290mm, height: 240mm.“ The injection-molded plastic body accurately captures the form of the early Beetle. Where possible, stickers have been kept over from the original model designs; these are joined by newly-designed markings.“ The rugged ABS space frame chassis from Item 58060 has been kept on. It utilizes double-wishbone front, and trailing arm rear suspension setups in tandem with CVA oil dampers.“ Rear universal drive shafts transfer power smoothly, and come with rubber boots to protect from dust.“ A large dust cover is included to protect the vital R/C equipment.“ The model has great off-road performance thanks to 130mm-diameter tires with a combined lug/pin spike tread. They are paired with gold color plated one-piece wheels.“ Includes a driver figure.Features1:10 scale kit modelNew edition of the TAMIYA Monster Beetle from 1986 (No. 300058060)Authentic Volkswagen Beetle body made of ABS plasticPowerful 540 electric motorIndependent front and rear suspensionProtected rear universal jointsCVA oil pressure shock absorbers130mm monster tires for rough terrainincluding driver figureelectronic speed controller 300058618

Here comes the latest new entry into the line-up of models on the adaptable and easy-driving TT-02 chassis. Itrecreates the Audi Quattro A2, which graced the 1983 WRC scene from midway through the season, contributingto driver Hannu Mikkola’s eventual Drivers’ Championship.About the ModelThis is a 1/10 scale R/C model assembly kit. Length: 458mm, width: 187mm.The classic quattro A2 body is molded accurately in lightweight and durable polycarbonate.Features separate metal-plated ABS parts for front and rear light cases, plus fog lamps. Side mirrors, wing andwing caps are molded in white ABS.Please note that light cases are compatible with separately sold LEDs; fog lamps are not.5-spoke wheels are molded in silver, and paired with racing radial tires.The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identicalsuspension arm and upright components for ease of assembly.4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride.An extensive TT-02 option parts line-up offers a number of opportunities to tune your car. 300058667

Here is another R/C kit with the MB-01 chassis – this time, long wheelbase and midship rear motor / rear wheel drive (MR). The Opel Kadett GT/E released in 1975 was a high-spec version of the Opel Kadett, a car which enjoyed great popularity in Europe in the 1970s. The GT/E had a 2-door coupe body, a high-spec 1.9-liter engine and reinforced suspension; the works Opel Eurohändler team, satellite teams and privateers took part in rally races with modified versions of this car, and in 1976 it secured second place in the manufacturer’s championship in global rally races.Product detailsThis is a 1/10 scale R/C model assembly kit. Length: 417mm, width: 174mm, height: 138mm. Wheelbase: 239mm (Long wheelbase).The form of the Opel Kadett GT/E is authentically recreated in lightweight polycarbonate and the color scheme of the works Opel Eurohändler team is employed.Features 60mm front and rear tires. Use 60D tires when changing tires.Please note that export model bodies are not pre-painted (only domestic model bodies are pre-painted).About the MB-01 chassis?The compact, 2WD MB-01 chassis gives a choice of three types of wheelbase, and front- or rear- wheel drive system. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low orhigh motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.WARNING!Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model.When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury.Read and follow the instructions supplied with paints and/or cement, if used (not included in kit).Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.Not suitable for children under 14 years. 300058729

Tamiya presents the Mercedes-Benz 190 E 2.5-16 EVO II 1991 on the popular TT-02 chassis. This car competed in the German Touring Car Championship (DTM) in 1991. Based on the compact Mercedes-Benz 190 E, it received improved aerodynamics with components such as fenders, front and rear spoilers, and a large rear wing. The engine was a 2.5-liter inline four-cylinder DOHC engine with 340 hp. In the same year, the factory car sponsored by the German beer brand König Pilsener secured second place in the championship and brought the manufacturers’ title to Mercedes-Benz.The 58750 TAMIYA 1:10 scale model is based on the proven TT-02 chassis. This allows for multiple adjustments to wheelbase, ground clearance, track width, and gear ratio. With countless optional tuning parts, the chassis can quickly be turned into a racer. The 4WD drive with central shaft, double wishbones, and shock absorbers on all four wheels ensures a realistic driving appearance and optimal traction. The chassis underside is designed extra smooth, and the battery compartment fits all common battery types. A visual highlight are the wheel hubs, which feature integrated brake disc replicas.1/10 scale kit modelBeginner-friendly TT-02 chassis – extremely robustLength: 445 mm, width: 184 mm, height: 137 mm, wheelbase: 257 mm (standard)Enclosed 4WD all-wheel driveTrue-to-original, unpainted polycarbonate bodyABS add-on parts: side mirrors and rear wingSilver rims with 26 mm slick tiresIndependent suspension front and rearIncludes electronic speed controllerIncludes torque tuned motorMany optional tuning parts available 300058752

TAMIYA presented the original in 1986 on the occasion of the 10th anniversary of RC models. This was the first model where the body was designed by an external designer: Takuya Yura. The reprint is very similar to the original version and has only been revised in some details.differences to the original version: 25T GT-Tuned 540 engineBuilt for 7.2V and 6.6V LF batteriesupdated sticker designbuilt for the use of electronic speed controllersincl. anti-wear grease for the steering systemTechnical details: Kit model in scale 1:10Aerodynamic bodywork made of polycarbonate incl. air scoopABS chassis4WD cardan drive incl. ball bearingIndependent wheel suspension on all four wheels with CVA oil pressure shock absorberSpecial rack-and-pinion steering "Rack an Pinion Steering".Dish rimsRedesigned stickers25T GT tuned engineElectronic cruise control (max. 22mm height) can be usedWARNINGS:Before you start assembling, read and understand all the instructions. If a child assembles the model, a supervising adult should also have read the building instructions.Tools including knives are used when assembling the kit. Special caution should be exercised to avoid injury. If you encounter any difficulties during assembly, ask an adult to supervise the work or ask a model builder with RC experience or a specialist dealer.Use tools only for the intended purpose. Incorrect use may result in injury.If you use paint and/or glue (not included in the kit), follow and follow the instructions provided. Keep kit away from small children. Avoid children taking any components into their mouths or pulling plastic bags over their heads. 300047330

300058715

This year is the 40th anniversary of the original Hornet’s release. To commemorate this anniversary, we are releasing a new version of the Hornet: 1/10 R/C Hornet EVO. You can see the differences between Items 58336 and this model (58742) in the suspension, rear gearbox, bearing and dampers.Product detailsThis is a 1/10 scale R/C model assembly kit.The 0.7mm thick polycarbonate body has the same shape as the classic body in Item 58336.The 2WD chassis has the same bathtub frame as the one used in Item 58336.While the color scheme of the original Hornet is carried over, this kit features the updated sticker design.Please note that Item 58336 will remain available. 300058742

The Fiat 131 Abarth Rally was derived from the Fiat 131 Mirafiori and made its debut in 1976 and won rally championship races in 1977 and 1978.In this version the body is already pre-painted!The TAMIYA MF-01X chassis has four-wheel drive and grippy Rally Block tires. Thanks to the independent wheel suspension and the closed drive via a cardan shaft, this is the perfect basis for the Fiat 131 and ready for RC rally feeling!Product details1/10 scale kit modelEntry-level friendly MF-01X chassis - extremely robustLength: 400mm, width: 180mm, height: 132mm, wheelbase: 239mm (L)Encapsulated 4WD all-wheel driveTrue to the original, pre-painted polycarbonate bodyFront light inserts (for 5mm LEDs, not included)Independent front and rear suspensionelectronic speed controllerIncl. 540 torque tuned motorMany tuning parts available as optionsDANGER!Before you begin assembly, you should read and understand all instructions. If a child is assembling the model, a supervising adult should also read the assembly instructions.Tools including knives are used when assembling the kit. Special caution is required to avoid injury.If difficulties arise during assembly, ask an adult to supervise the work or a model maker with RC experience or a specialist dealer.Only use tools for their intended purpose. There is a risk of injury if used incorrectly.If you use paints and/or glue (not included in the kit), note and follow the instructions provided there.Keep the kit away from small children. Prevent children from putting any components in their mouths or putting plastic bags over their heads. Danger! Not suitable for children under 14 years. 300047494

The model of the beefy BMW M3 GT2 is a faithful replica of the original. Underneath the robust polycarbonate body, the tried-and-tested TT-01 Type chassis performs its duties with aplomb. All-wheel drive and a powerful electric motor create a real racing atmosphere. Features:Chassis with central drive shaft4WD cardan driveCone differential front/rearIndependent suspensionTyres and true-to-life BBS rimsLight housing front + rear 300058449

This R/C assembly kit depicting the 1978 Ford Zakspeed Capri Turbo is a special limited-edition release that is paired with the fun and easy to build TT-02 chassis.About the Ford Zakspeed Capri TurboIn 1978, the Ford Zakspeed Capri Turbo was developed for the DRM (German Racing Championship) by West German racing team Zakspeed. This car featured an extremely low-profile wide body born of intensive wind tunnel testing and weighed a mere 790kg. The car was paired with a 1,427cc inline-4 DOHC turbo engine capable of 375hp. This car achieved victory for the first time at the 11th race of the DRM in Nürburgring in October 1978; the next year it got the second position at the first race of the DRM and victory at the second race.Adaptable TT-02 Chassis offers balanced shaft driven 4WD.The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.1/10 scale R/C model assembly kit. Length: 488mm, width: 205mm, height: 124mm. Wheelbase: 251mm.The distinctive form of the 1978 Ford Zakspeed Capri Turbo is captured using a lightweight, rigid 1.0mm thick polycarbonate body.The efficient shaft-driven 4WD TT-02 chassis features superior adaptability and stability.Front 2-piece mesh wheels from Item 50548 (silver color) are paired with racing slick tires.Rear 2-piece wide mesh wheels from Item 50549 (silver color) are paired with wide racing slick tires from Item 50547.Gold color wheel caps are used at front and rear.Includes livery stickers and masking tape for the windows for use in the painting process.Includes 540-Type Torque Tuned Motor and ESC.Required to complete: 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger and Tamiya PS paints. 300047526

The iconic Porsche 911 RSR 2.8 makes its way to the highly versatile BT-01 chassis! To faithfully recreate the motor and drive train layout as much as possible of the full-size car, this kit instructs the builder to assemble the chassis in the short wheelbase, midship rear motor / rear wheel drive (MR) setup. This layout configuration provides rear wheel drive handling excitement at every turn and exciting throttle response.About the Porsche 911 RSR 2.8:The Porsche Carrera RS 2.7 is a legend of the Porsche 911 series. Developed to join European GT races in 1973, it employed a 2,687cc horizontally opposed 6-cylinder engine capable of 210hp, a lightweight body with improved aerodynamics, and wide rear tires. The Carrera RSR 2.8 racing version increased displacement to 2,808cc and output to over 300hp; in 1973, it was a European GT race champion and took numerous global victories.About the BT-01 Chassis:The 2WD BT-01 chassis gives the choice of two types of wheelbases, and front-or rear-wheel drive system. Without removing the battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front-and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as the motor mount, final gears and suspension facilitate ese of assembly and effective maintenance.1/10 scale R/C model assembly kit. Length: 457mm, width: 204mm, height: 138mm. Wheelbase: 251mm. (Short)The form of the Porsche 911 Carrera RSR 2.8 is realistically recreated in lightweight polycarbonate.Silver color wheels (front: narrow, rear: wide / rims and red wheel caps are separate) are paired with racing slick tires (front: Item 50454, rear: Item 50547).Separate molded plastic part recreates the side mirror.Includes 540 brushed motor and ESC.Required to complete: 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS paint.SPECIFICATIONSAdjustable Gear Ratio YesBearings Plastic bushingBody Material PolycarbonateBody Stickers IncludedChassis Material ABS PlasticChassis Type BT-01Construction Type Assembly KitDifferential Type GearDrive Type 2WDElectronic Speed Control (esc) Includes HobbyWing THW 1060 Brushed Motor ESC (2-3S)Motor 540-brushed typeRequired To Complete 2-channel radio, steering servo, 7.2volt battery & battery charger, and Tamiya PS paint.Scale 1/10Shock Damper Friction typeSuspension Fully Independent Double WishboneTerrain Use On-Road 300058740

300058688

This R/C model assembly kit recreates the classic FIAT 131 Abarth Rally Olio Fiat on the easy to assemble and drive MF-01X rally chassis platform. The Fiat 131 Abarth Rally developed from the Fiat 131 Mirafiori which made its debut in 1976 and became champion in global rally races in 1977 and 1978. The kit depicts the Olio Fiat’s livery.MF-01X - Compact 4WD At Home on a Range of SurfacesBased around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Off-road capable M-05Ra chassis uprights and hub carriers are also included, and spoke wheels are paired with rally block tires.1/10 scale R/C model assembly kit. Length: 400mm, width: 180mm, height: 132mm. Wheelbase: 239mm (L-size wheelbase).The body is breathtakingly recreated in durable, lightweight polycarbonate.Separately molded plastic components recreate side mirrors and rear wings.The MF-01X chassis is at home on-road or on flat dirt, thanks to 4-wheel double wishbone suspension.Polycarbonate light cases are compatible with separately sold 5mm LEDs.Stickers are included to recreate body details and logos.A host of Hop-Up Option parts are available to tune the MF-01X chassis.Includes 540 Torque Tuned Motor.Includes ESC.Requires 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger and Tamiya PS paints to complete.Bausatzmodell im Maßstab 1/10Einsteigerfreundliches MF-01X Chassis - extrem robustLänge: 400mm, Breite: 180mm, Höhe: 132mm, Radstand: 239mm (L)gekapselter 4WD Allradantriebvorbildgetreue, unlackierte Polycarbonat KarosserieLichteinsätze vorne (für 5mm LEDs, nicht inklusive)Einzelradaufhängung vorne und hintenelektronischer Fahrtenreglerinkl. 540er Torque Tuned Motorviele Tuningteile optional erhältlichPassende Farbe: TAMIYA 300069944 PS-xx Dark BlueSPECIFICATIONSAdjustable Gear Ratio YesBearings Plastic bushingBody Material PolycarbonateBody Stickers IncludedChassis Material ABS PlasticChassis Type MF-01XConstruction Type Assembly KitDifferential Type GearDrive Type 4WDElectronic Speed Control (esc) Includes HobbyWing THW 1060 Brushed Motor ESC (2-3S)Motor 540-brushed typeRequired To Complete 2-channel radio, steering servo, 7.2volt battery & battery charger, and Tamiya PS paint.Scale 1/10Shock Damper Friction typeSuspension Fully Independent Double WishboneTerrain Use Multi-Purpose 300058723

The Integrale will also be available on Tamiya’s versatile new TT-02 chassis, which is suited to a wide range of drivers’ abilities.About the ModelThis is a 1/10 scale R/C assembly kit.Kit includes FREE BONUS PARTS (Item 53156 Hard Inner Sponge Set) which are for EXPORT ONLY and are subject to the FIRST PRODUCTION.The model’s polycarbonate body accurately recreates that of the real rally car.The shaft driven 4WD TT-02 is a highly versatile and easy-to-maintain chassis.A wide range of option parts are becoming available to tune and customize TT-02 chassis machines.The kit includes decorative and masking stickers.Rally Block tires are fitted to stylish white wheels.Type 540 Motor included.FeaturesTT-02 tub frame chassis4WD all-wheel drivecentral drive shaftCone differential f/r with four bevel gearsdouble wishbones f/rToe adjustable frontIndependent wheel suspension with friction damperselectronic speed controllerElectric motor type 540 with air coolingMotor mount compatible with electric motors type 380Battery compartment suitable for all battery typesGear ratio adjustable in 10 stepsrobust and detailed polycarbonate body (unpainted)separate injection molded mirrors and rear spoilerVariable wheelbase: normal 258 mm (257) mm/short 252 mmRally block tread tyresDecal sheet and painting aids (window masking film) included 300058570

This R/C assembly kit depicts the BMW M4GT3 EVO as it raced in 2025 FIA World Endurance Championship (WEC) in the LMGT3 class used by both customer and works teams. The all-new polycarbonate body featured in this kit is paired with the fun and easy to build TT-02 chassis.The M4GT3 EVO is used by top teams in the WEC series, including the works factory team co-piloted by renowned former MOTO GP champion Valentino Rossi. The livery used in this release depicts the show car livery when the car was unveiled to the public in its promotional debut. R/C fans can use the show car livery or use their imagination to create one of their favorite WEC racing teams.Adaptable TT-02 Chassis offers balanced shaft driven 4WD.The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.1/10 scale R/C model assembly kit. Length: 443mm, width: 188mm, height: 132mm. Wheelbase: 257mm.Lightweight, rigid 1mm thick polycarbonate body with separate polycarbonate front and rear light cases add three-dimension depth (Note: LED lights are not attachable) and rear wing.Separate black ABS plastic parts realistically depict side mirrors and rear wing stays.Newly designed black 5-spoke wheels (offset +2) accurately depict those on the actual car. They are paired with racing slick tires.The efficient shaft-driven 4WD TT-02 chassis features superior adaptability and stability.Includes Item 51019 Urethane Bumper (TT-01, TGS) to keep the body in top condition.The kit features pre-cut wheel arches and pre-made body mount holes.Includes window masking stickers for use in the painting process.Includes 540-Type Torque Tuned motor and ESC.Required to complete: 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger and Tamiya PS paints. 300058751

Tamiya presents another racing machine – the Mercedes-AMG GT3 EVO – paired with the popular TT-02 chassis.The Mercedes-AMG GT3 EVO was developed for GT3 racing in 2020. Based on its predecessor model, it features a 6.3-liter V8 engine with 550 hp and extensively improved aerodynamics. It comes with an automatic data acquisition system for race analysis, and the engine starts automatically as soon as the vehicle is lowered from the air jacks. This car offers maximum safety and is used by racing teams worldwide.The 58750 TAMIYA 1:10 scale model is based on the proven TT-02 chassis. Wheelbase, ground clearance, track width, and gear ratio can all be adjusted, and with countless optional tuning parts the chassis can quickly be turned into a full racer. The 4WD drive with central shaft, double wishbones, and shock absorbers on all four wheels ensures realistic driving performance and excellent traction. The underside of the chassis is designed extra smooth, and the battery compartment fits all common battery types. A visual highlight are the wheel hubs with integrated brake disc replicas.1/10 scale kit modelBeginner-friendly TT-02 chassis – extremely robustLength: 454 mm, width: 189 mm, height: 120 mm, wheelbase: 251 mm (short)Enclosed 4WD all-wheel driveTrue-to-original polycarbonate body with polycarbonate light insertsABS add-on parts: side mirrors and rear wingIndependent suspension front and rearIncludes electronic speed controllerIncludes torque tuned motorIncludes 51226 front bumperMany optional tuning parts available 300058750

This radio-controlled model assembly kit recreates the Volkswagen Golf II GTI 16valve. The kit is based on the beginner friendly and highly customizable MB-01 chassis, which allows hobbyists to grow as their driving and building skills develop. Like the full-size car it depicts, the chassis configuration on the MB-01 chassis is set up in the front motor, front drive configuration for unparalleled realism.For a limited time only: The limited-edition version of the kit includes the polycarbonate body pre-painted in Bright Red (PS-34) with Smoke (PS-31) windows, pre-cut wheel arches and pre-made body mount holes, which is great for not only beginners but also R/C veterans.About the Golf II 16VThe FF drivetrain Golf is one of Volkswagen’s most iconic cars. From its first appearance in 1974, Volkswagen Golf continued to develop and lead the worldwide compact car class. In 1986, the Golf II GTI 16V was added to the second-generation model Golf II lineup which had made its debut in 1983. With a 1,781cc inline-4 DOHC 16-valve engine, a tuned car took part in global rally races, and in the U.S. became a fan favorite hatchback of the 1980’s era.About the MB-01 chassisThe compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and a front- or rear- wheel drive system. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. 300047516

This radio-controlled model assembly kit recreates the Audi R8 LMS 2008 with a stunning and highly detailed polycarbonate body. The kit is based on the beginner friendly and highly customizable TT-02 chassis, which allows hobbyists to grow as their driving and building skills develop.For a limited time only: The limited-edition version of the kit includes the polycarbonate body pre-painted in Bright Silver (PS-41), Black (PS-5) with Smoke (PS-31) windows, pre-cut wheel arches and pre-made body mount holes, which is great for not only beginners but also R/C veterans.About the Audi R8 LMSBased upon the Audi sportscar R8 and conforming to GT3 regulations, the Audi R8 LMS was announced in 2008. A 5.2-liter V10 midship engine capable of over 500hp was mounted in a lightweight aluminum space frame. Body sections were modified, and the drivetrain was changed from 4WD to a rear-wheel drive system. From 2009 onward, this car was delivered to racing teams around the world and achieved many racing successes.Adaptable TT-02 Chassis offers balanced shaft driven 4WD:The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Mesh-type wheels are paired with racing slick tires. 300047517

This is a 1/10 scale R/C model assembly kit.Length: 390mm, width: 198mm, height: 237mm. Wheelbase: 252mm (M-size wheelbase).The lightweight, durable polycarbonate body realistically captures the distinctive square form of the Toyota Land Cruiser 40.pre-painted BodySeparate components faithfully depict grille, mirrors and turn signals.The CC-02 chassis is designed for a wide range of off-road scenes, and has a ladder frame which was inspired by full-size vehicles.Propeller shafts (short: 76mm) are also included.A roof rack with light pods is realistically depicted with separately molded parts.Silver color 12-spoke wheels are paired with block pattern tires. (Wide wheels are included to recreate the customised version.)New stickers feature integrated window and window frame sections to allow ease of applying stickers and eliminate the need for painting.Includes cockpit parts and driver figure. 300047490

RC OPEL KADETT GT/EDESCRIPTIONFor a limited time only, the Opel Kadett GT/E 1/10 scale R/C car kit comes with the polycarbonate body pre-painted in Yellow (PS-6) with Smoke (PS-31) windows, pre-cut wheel arches and pre-made body mount holes, which is great for not only beginners but also R/C veterans.The Opel Kadett GT/E released in 1975 was a high-spec version of the Opel Kadett, a car which enjoyed great popularity in Europe in the 1970s. The GT/E had a 2-door coupe body, a high-spec 1.9-liter engine and reinforced suspension. The works Opel Eurohändler team, satellite teams and privateers took part in rally races with modified versions of this car, and in 1976 it secured second place in the manufacturer’s championship in global rally races at the time. This 1/10 scale R/C assembly kit recreates the Opel Kadett GT/E on the versatile MB-01 chassis platform. The MB-01 chassis for this subject is configured in the long wheelbase and midship rear motor / rear wheel drive (MR) configuration to faithfully capture the layout of the actual vehicle.About the MB-01 chassisThe compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and front- or rear- wheel drive system. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; low or high motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance.1/10 scale R/C model assembly kit. Length: 417mm, width: 174mm, height: 138mm. Wheelbase: 239mm (Long wheelbase).The body is recreated in lightweight polycarbonate pre-painted in yellow with smoke window tint.Features 60mm front and rear tires. Note: Use 60D tires when changing worn tires.Includes 540-Brushed Type motor and ESC.Required to complete: 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger. 300047499

TAMIYA presents the Nissan GT-R on the proven TT-02 Drift chassis. The Drift version is already equipped with CVA oil pressure shock absorbers, cardan drive, 24mm Drift-Spec tyres, ball bearings, Sport Tuned engine and aluminium heat sink. The body is original from the kit 300058411 and is equipped with side mirrors etc. Highlight is the enclosed LED light set!Technical details:- Kit model in scale 1:10- Detailed polycarbonate body incl. LED light unit- Rugged TT-02D chassis (Drift Tuned)- many tuning parts as standard, e.g. oil pressure shock absorbers, drift tyres, aluminium parts- electronic brushless/brushed speed controller- many tuning parts optionally availableRequired Accessories: - Remote control with receiver, steering servo, 7.2V NiMH battery pack, charger, colour for lexan body (TAMIYA PS-)WARNING:Before you begin assembly, you should read and understand all instructions. If a child is assembling the model, a supervising adult should also have read the assembly instructions.Tools, including knives, are used to assemble the kit. Special care should be taken to avoid injury. If difficulties arise during assembly, ask an adult to supervise the work or a model builder with RC experience or a specialist dealer.Only use tools for their intended purpose. Incorrect use may result in injury.If you use paint and/or glue (not included in the kit), follow the instructions provided with the kit. Keep the kit away from small children. Prevent children from putting any components in their mouths. 300058623

This R/C assembly kit depicting the Mercedes-Benz 190 E 2.5-16 EVO II is a special limited edition release that includes the polycarbonate body pre-painted in Metallic Black (PS-5) and Silver (PS-12) with Smoke (PS-31) windows, with pre-cut wheel arches and pre-made body mount holes, which is great for not only beginners but also R/C veterans.The TT-02 chassis is an easy to build and proven platform. It’s perfect for enthusiasts to begin their hobby journey into the world of R/C 4WD on-road racing or simple parking lot fun with friends. This kit recreates the Mercedes-Benz 190 E 2.5-16 EVO II, which sits on top of the TT-02 chassis as it raced in 1991in the renowned DTM series.About the Mercedes-Benz 190 E 2.5-16 EVO IIThe German Touring Car racing series known as DTM began its roots in 1984 with significant rule changes over the decades. In the early 1990’s interest in the series reached elevated levels as Mercedes Benz battled archrival BMW among other brands for on-track supremacy. During DTM’s championship contention, Mercedes introduced 190 E 2.5-16 EVO II in 1991. Based upon the compact Mercedes-Benz 190 E, it was given improved aerodynamics with components such as over fenders, front and rear spoilers and a large rear wing, and employed a 2.5-liter inline-4 DOHC engine capable of 340hp. In the same year, the works team car sponsored by German beer brand König Pilsener secured second place in the Championship and brought the Manufacturer’s Championship to Mercedes-Benz.Adaptable TT-02 Chassis offers balanced shaft driven 4WD.The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.1/10 scale R/C model assembly kit. Length: 445mm, width: 184mm, height: 137mm. Wheelbase: 257mm.The Mercedes-Benz 190 E 2.5-16 EVO II is made of lightweight, rigid 1.0mm thick polycarbonate. This edition includes pre-painted body with pre-cut wheel arches and pre-made body mount holes. Note: Livery stickers still need to be applied.Separate black ABS plastic parts realistically depict side mirrors, rear-wing, front grille and emblems.The efficient shaft-driven 4WD TT-02 chassis features superior adaptability and stability.Silver color dish wheels are paired with racing slick tires.Includes livery stickers and window masking tape for use in the painting process.Includes 540 Brushed Motor and ESC.Required to complete: 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger. 300047525

In 1992, Nissan won the Daytona 24 Hours with the R91CP, driven by Japanese drivers (Kazuyoshi Hoshino, Toshio Suzuki and Masahiro Hasemi). It was the first time a Japanese car manufacturer had won this historic endurance race. Tamiya has recreated this legendary racing car on a 1:10 scale chassis, using a highly detailed polycarbonate body with a cockpit interior. The extremely detailed body is mounted on a direct-drive platform fitted with foam tyres for excellent traction on smooth surfaces.This kit was originally launched in 1992 and re-released in 2012.Direct-drive chassis with two-wheel driveThe chassis is based on an ABS plastic tub with front and rear space frames and FRP panels; it is a composite construction that provides a rigid base for the responsive suspension: The result is a precise, responsive driving experience. At the front, it features independent, spring-loaded king-pin suspension, whilst the rigid rear suspension is designed as a 3-point construction with a 1.5 mm thick FRP T-bar and a single CVA oil damper; combined with foam tyres at the front and rear, these ensure excellent traction on smooth tarmac and carpeted surfaces. Furthermore, the use of spacers allows for two different ground clearance settings at the front and three at the rear.FEATURES:1:10 scale RC model kit. Length: 480 mm, width: 204 mm, height: 109 mm. Wheelbase: 280 mm.The distinctive, aerodynamic low-profile body, rear wing and front headlight housings are separately moulded from polycarbonate. (Please note that no LED lights can be fitted.)The polycarbonate body and rear wing feature pre-drilled holes.Black nylon plastic parts realistically replicate the wing mirrors, rear wing strut, air intake and windscreen wipers.Includes a cockpit and driver figure made from styrene plastic.The 5-spoke wheels in a gun-metallic finish are fitted with high-grip sponge tyres.The set includes helmet decals featuring three Japanese drivers (Kazuyoshi Hoshino, Toshio Suzuki and Masahiro Hasemi).Includes a 540-series brush motor.Required for completion: 2-channel radio control, steering servo, speed controller, 7.2–7.4-volt battery with suitable charger, and Tamiya PS paints. 300047531

Tamiya is delighted to announce the appearance of another off-road car on our popular CC-02 chassis, this time the 1990 Land Rover Defender 90 (originally depicted in Item 58657). The Defender 90 is a legendary Land Rover off-road car, and its roots go back to 1948. Based on differences in wheelbases, this car has three types – the Defender 90/110/130. This model depicts a 3-door model with 93-inch wheelbase.This is a 1/10 scale R/C model assembly kit. Length: 429mm, width: 200mm, height: 215mm, wheelbase (short): 242mm (the same size as the CC-01S chassis).The unmistakeable Defender 90 form is accurately captured by the lightweight polycarbonate body, now with additional body mount attachment positions.Compatible with 5mm-diameter LEDs x2 for headlights and 5mm-diameter LEDs x6 for the rear.Includes separately molded parts for grille, side mirrors, light cases and outer roll gages.Black ABS resin wheels are paired with semi-pneumatic all-terrain tires.The short propeller shafts (P parts) transmit power to the differential gears front and rear.The ladder frame CC-02 chassis features superior durability and employs front/rear coil spring suspension which is great for off-road surfaces including rocky terrain.A wide range of Hop-Up Option Parts is available to customize the CC-02 chassis 300058700

One of our iconic R/C models, the Lunch Box, has been loved by R/C kit builders for a long time! Fans have enjoyed this kit in creative ways including making their own unique customizations to the chassis. This kit takes that spirit of customization by creating the Lunch Box EVO edition with features such as updated suspension and longer tread and wheelbase.1/10 scale R/C model assembly kit. Length: 390mm, width: 295mm, height: 220mm. Wheelbase: 217mm. Tread: 228mm.ABS plastic body-identical to the original.Tread and wheelbase are 10mm longer compared to the iconic Lunch Box to improve traction and controllability.Updated suspension features front double wishbone's and a rear 3-link setup with rigid axles for stable performance.New equal length steering arm added to front and rear stabilizer.Strut bar is added at front to enhance chassis rigidity.7mm lower body mount provides a lower center of gravity, which helps stable control.Body is securely mounted by eight screws.Features full ball bearings.Hex wheel hubs are included. Use with 950 ball bearings (sold separately) and change wheel attachment hole sizes to allow attachment of wheels with hex hubs at front and rear.Updated sticker design.Includes 540-Type motor and ESC. 300058755

TAMIYA now presents the small version of the legendary Monster Beetle in 1/14th scale. The Beetle comes on a new chassis with all-wheel drive and portal axles. These axles reduce the overall reduction ratio, increase the power and increase the ground clearance of the model. The 4WD chassis is fully encapsulated and has 2 differentials. The powerful TAMIYA 540 engine provides mega driving pleasure. Due to the independent wheel suspension and the 4 shock absorbers the model has a very good handling.WARNING: Before you start with the assembly, you should have read and understood all instructions. If a child is assembling the model, a supervising adult should also have read the assembly instructions. Tools, including knives, are used to assemble the kit. Special care should be taken to avoid injury. If difficulties arise during assembly, ask an adult to supervise the work or a model builder with RC experience or a specialist dealer. Only use tools for their intended purpose. Incorrect use may result in injury. If you use paint and/or glue (not included in the kit), follow the instructions provided with the kit. Keep the kit away from small children. Do not allow children to put any components in their mouths or pull plastic bags over their heads. 300058672

This R/C kit depicts the Tamiya Quirkhopper, an original body design mated on the easy to build GF-02 chassis.About the GF-02 chassisThe gear-driven 4WD GF-02 chassis features its motor in a low, central position in the lightweight, durable monocoque frame, and transmits power to front and rear via gears. The long wheelbase and wide tread setup ensure stable off-road performance. The slim frame features ladder/pipe motifs and features integrated sealed gearboxes which help keep stones out. Front and rear gear differentials allow smooth cornering, while separately sold pinion gears offer a choice from three types of gear ratios, and a motor guard enhances reliability off-road. The 4-wheel double wishbone suspension employs four friction dampers, and the steering servo is positioned on the left with identical-length tie-rods.1/10 scale R/C model assembly kit. Length: 400mm, width: 280mm, height: 175mm. Wheelbase 267mm.Paint the 0.7mm thick lightweight, rigid polycarbonate body as you wish.The front of the body features two headlights, and rear has wing integrated with large air intakes.123mm large-diameter tires.Includes dedicated stickers.Includes 540-Type motor and ESC.Required to complete: 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger and Tamiya PS paints. 300058756

A Super New FaceThis R/C model assembly kit creates the Super Avante, a 4WD off-road buggy that is bestowed with Tamiya’s legendary Avante name. It features an exceptionally low profile design enabled in part by its front inboard suspension, with a shaft-driven 4WD drivetrain powered by a midship motor and employing front/rear ball differentials plus full ball bearings. Its futuristic body design is the work of Kota Nezu at znug design, and features numerous clear sections that just add to the Super Avante’s distinctly modern mood, as do the cockpit-rear buttress and the four mini fenders.TD4 – Low Profile, High PerformanceThe TD4 is a shaft-driven 4WD buggy chassis which employs front inboard suspension for slim, low-profile form. It features a longitudinal battery pack position in the center and a midship transverse motor for optimum balance and improved performance. The drivetrain uses full bearings, and sealed front/rear gearboxes have built-in ball differentials. Two link rods and crank arm transmit movement of the left-side servo to the three-piece steering arm setup. 4-wheel independent double wishbone suspension utilizes CVA oil dampers. Turnbuckle shaft upper arms facilitate camber angle adjustment. Two types (high/low) of wing stays are included and star dish wheels are paired with square spike tires which offer superlative grip off-road.SpecificationsLength: 387mm, width: 246mm, height: 117mm (with low wing stays employed) Wheelbase: 283mmTread: 214mm (front), 205mm (rear) Plastic bathtub frame Shaft-driven 4WD Front & rear ball differentials 3-piece steering tie-rod 4- wheel double wishbone suspension Tire width/diameter: 32/82mm (front), 41/82mm (rear) CVA oil dampers Gear Ratio = 10.7 1:1 Type 540 motor Electronic Speed Controller (ESC) is sold separately. 300058696

This is a 1/10 scale R/C assembly kit. Length: 425mm, height: 140mm, width: 225mm. Wheelbase: 255mm.Polycarbonate body (0.7mm thickness) is pre-cut and pre-painted in light blue. Comes with metal-plated parts (A, E, G and front/rear wheels).Window nets, number plates and dummy antenna are also included.Includes new stickers designed by Jun Watanabe’s brand "BLOCKHEAD MOTORS".*These features are different from Item 58525.Durable and lightweight ABS box type frame is matched with a battery case which is compatible with modern power sources such as Tamiya Racing Packs and LF batteries.4-wheel independent suspension consists of coil springs and trailing arms. A wide tread ensures excellent off-road stability.Enclosed gearbox includes differential gears for smooth cornering.Driveshafts feature dogbone-type joints and dust covers. 300058695

This shaft-driven 4WD chassis kit (M-chassis size) is another addition to the R/C rally line-up, and has features such as three types of wheelbase, new suspension components and a polycarbonate chassis cover. Add this chassis kit to your M-rally collection!Compatible Hop-Up Option Parts for XM-01 Chassis (NOT included!)22046: XV-02/TT-02 Ball Differential Set (39T)22047: XV-02/TT-02 Front Direct Coupling Set (39T)22048: XV-02 Slipper Clutch Set22049: XV-02/TT-02 Oil Gear Differential Unit22050: 06 Module Spur Gear (70T) for XV-02 Gear Differential(Use with Item 22049 XV-02/TT-02 Oil Gear Differential Unit.)22053: XV-02 Aluminum Spur Gear Holder22055: XV-02 Aluminum Adjustable Suspension Mount (XH)22056: XV-02 Aluminum Damper Stay Mount22064: TT-02 Type-SRX Front Direct Cup Joints(Use with Item 22046 XV-02/TT-02 Ball Differential Set (39T) or Item 22047 XV-02/TT-02 Front DirectCoupling Set (39T).)22072: XV-02 Aluminum Steering Arms (L/R)54802: TB-05 Aluminum Steering Bridge54884: Aluminum Adjustable Separate Suspension Mounts (A)Product detailsThis is a 1/10 scale R/C chassis assembly kit.Equipped with front mid-ship, longitudinal motor position.Changing rear section allows a choice from three wheelbases (short: 210mm, middle:225mm, long: 239mm).Bathtub frame chassis and polycarbonate chassis cover plus front inside polycarbonate cover and rear section are newly-molded parts. Mud guards helps prevent dirt and dust from getting inside.Caster angle can be set at 5 degrees by suspension mounts.*For comparison, the XV-02 PRO chassis kit uses caster blocks which feature 6-degree caster angle.(XV-01 chassis: 10-degree caster angle)The drivetrain employs oil-filled gear differential for front and rear.Comes with two 39T differential gears and one 40T differential gear for adjustment of front and rear drive balance.Use 39T gear (w/15T gear) on the front and 40T gear (w/15T gear) on the rear for drive balance bias to front and vice-versa for drive balance bias to rear.It features a longitudinal upright battery pack position in the center-left for optimum balance.Front bumper with skid angle contributes to reduce surface contact.Aluminum dampers are employed at front and rear.M-Chassis 11-spoke racing wheels (Item 51394) are paired with 60D rally block tires (Item 51427).Front and rear universal drive shafts come as standard.Compatible with center diff setup and separately sold slipper clutch.Some Hop-Up Option parts for the XV-02 PRO chassis kit can be used.Low-profile servo is recommended. (Standard servo can be used, but it comes into contact with the front inside polycarbonate cover.)Please note that this chassis requires separately sold body, battery pack, motor and R/C equipment.WARNING!Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model.When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury.Read and follow the instructions supplied with paints and/or cement, if used (not included in kit).Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.Warning! Not suitable for children under 14 years. 300058738

The Lancia Delta Integrale, which has made a number of appearances on various chassis over the years, now comes on the XV-01 chassis. Rally fans are sure to have fond memories of this legendary rally warrior, which won 6 titles back-to-back at the end of the 1980s and start of the 1990s.About the ModelThis is a 1/10 scale R/C assembly kit.The body is recreated faithfully in polycarbonate.The XV-01 chassis features front-motor belt-driven 4WD.Metal-plated side mirrors and grille come as separate parts.The car is appropriately fitted with Rally Block tires, on white wheels.Type 540 Motor included.Features4WD chassis with encapsulated belt driveFront engineRobust polycarbonate body 1 mm thickDecal sheet and painting aidDouble wishbones with oil pressure shock absorbersBlock tread tyresseparately molded side mirror partsElectric motor type 540sealed ball bearingsFront toe/camber adjustableAdjustable rear camberElectronics box for receiver/controllerBattery can be inserted from below 300058569

Tamiya welcomes a re-released and updated version of the 4WD buggy Hotshot II, the original of which was first released in 1987, following Tamiya’s first 4WD buggy Item 58047 Hotshot released in 1985 and Item 58054 Supershot released in 1986. The Hotshot II was a lightweight design thanks to its use of plastic parts. Why not get this nostalgic buggy kit in addition to Item 58695 1/10 R/C Wild One Off-Roader Blockhead Motors?Including ESC.Product detailsThis is a 1/10 scale R/C model assembly kit. Length: 390mm, width: 235mm, height: 160mm.The shaft-driven 4WD gives speed and stability off road, and through corners.The 4-wheel independent double wishbone suspension employs CVA oil dampers (II) (one for front and two for rear) with a front stabilizer to help get the most out of the 4-wheel drive.Dynamic body and rear wing are lightweight polycarbonate (0.7mm thick), and use a color scheme featuring orange lines on a black base. Polycarbonate body is pre-cut and pre-painted in black.Sections such as ABS monocoque frame and suspension arms feature reinforced plastic for high durability.Semi-pneumatic oval block / pin spike hybrid tires are paired with large-diameter one-piece nylon wheel.Includes updated stickers.Including ESCWARNING!Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model.When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury.Read and follow the instructions supplied with paints and/or cement, if used (not included in kit).Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.Warning! Not suitable for children under 14 years. 300058737

Tamiya presents the latest XV-01 chassis - with the Subaru Impreza! Tamiya presents the latest XV-01 chassis - with the Subaru Impreza! The first RC model on the XV-01 chassis is the Subara Impreza WRX Sti, which was launched in 2011 by Team Subara Arai. Led by Toshihiro Arai, winner of the 2005 and 2007 championships, the Production Car World Rally Championship (PWRC) season, the team took the Impreza into the 2011 Intercontinental Rally Challenge (IRC) series. The team also drove at the Hokkaido Rally in the Asia-Pacific Rally Championship (APRC) in 2011, where the car impressively drove to victory. Features:This is a kit on a scale of 1:10XV-01 ChassisThe sporty shape of the Impreza has been realistically recreated with a robust polycarbonate body.A decal sheet is included to show the Arai Rallye team decoration.The chassis has a 4WD system driven by a toothed belt.Covers protect actuator and RC unit from dirt and depositsDouble wishbone with suspension struts on all wheels features high stroke and is equipped with rally block tread tyres to provide a dynamic RC rally ride on gravel and asphalt surfaces guarantee.separately shaped side mirror parts included.Electric motor type 540 300058528

TAMIYAs Rock Socker has a TAMIYA legend as body, connoisseurs immediately remember the Stadium Blitzer. The kit of the "King of the Hill" is based on the CR-01 trial chassis. The robust body gives the model the look of the typical US-Rock Crawler. Thanks to the extremely twisty chassis and its non-slip crawler tyres with beadlock rings, the TAMIYA Rock Socker overcomes almost any obstacle.Technical Details:CR-01 chassisScale 1:10 polycarbonate bodyPolycarbonate bodyParts for optional 4-wheel steering incl.bolted beadlock rimssoft and non-slip crawler tyrescentral planetary gearheavy-duty ladder frame made of lightweight and robust aluminium profiles with plastic cross strutsWheel suspension with separate springs and push rods for the dampers Electric motor type 540 incl.A large variety of tuning parts is optionally available to further upgrade the CR-01 chassis. Warnings:Before you begin assembly, you should read and understand all instructions. If a child is assembling the model, a supervising adult should also have read the assembly instructions.Tools, including knives, are used when assembling the kit. Special care should be taken to avoid injury.If difficulties arise during assembly, ask an adult to supervise the work or a model builder with RC experience or a specialist dealer.Only use tools for their intended purpose. Incorrect use may result in injury.If you use paint and/or glue (not included in the kit), follow the instructions provided with the kit.Keep the kit away from small children. Do not allow children to put any components in their mouths or pull plastic bags over their heads. 300058592

This trailer is equipped with double axle, aluminum chassis, 3-stage adjustable aluminum drawbar (without load). Here, too, the installation of an electrical system for lighting is prepared.Product no.: 300156310Product Name: 1:14 RC Stanchion Telescopic Trailer BSSpecifications:Height: 230 mmWeight: 2550 g 300056310

Our popular M-chassis series welcomes a new addition – this time, the M-08R Chassis Kit. This chassisemploys various kinds of option parts such as ball differentials and CVA oil dampers to get ready for races.This is a 1/10 scale R/C model assembly kit.The M-08R Chassis Kit equips the rear-wheel drive M-08 Concept Chassis Kit with a wealth of option parts.The TA06 Rear Ball Differential Set (Item 54306) utilizes twelve 3/32-inch balls to give superb stability.Includes carbon fiber components such as battery holders and body mount base (Item 54908).M-08 Concept Reinforced K Parts (Gearbox) (Item 54983) give sturdier gearbox and steering setups, for more efficient drive and improved steering feel.Comes with the dedicated chassis weight (20g).Features hex head screws for attachment.M-07 Concept Reinforced D Parts (Suspension Arms) (Item 54811) featuring carbon fiber-reinforced resin allow superior cornering ability.Durable, lightweight aluminum turnbuckle shafts (3x18mm; Item54247, 3x23mm; Item 54248, and3x32mm; Item 54249) allow adjustment of length without removing adjusters. These parts also feature a stylish blue anodized finish.Includes a blue anodized finish version of the TRF Super Short Big Bore Dampers+ (4pcs.) (Item 42355).The 1.3mm diameter damper pistons (x3) give smooth oil flow and facilitate more flexible suspensionThe TRF/Hop-Up Option parts below are also included.42143: 4mm Aluminum Serrated Wheel Nut (4pcs./Blue)42357: Cross Joints for Low Friction Assembly Universal Shafts51000: Hi-Torque Servo Saver (Black)53509: Hard Fluorine Coated 0.6 Aluminum Pinion Gear (20T/F201)53642: 5mm Aluminum Ball Connector (Blue)53823: Clamp Type Aluminum Wheel Hub (5mm Thick)53851: 46mm Titanium Coated Suspension Shafts 2pcs.53917: ? 2.6mm Titanium Coated Suspension Shaft Set for Reversible Suspension53968: 5x5mm Hard Hex Head Ball Head Connector (5pcs.)54183: M-Chassis Reinforced Freewheel Axle Set54868: Open Face 5mm Reinforced Adjusters (Medium/8pcs.)54869: Open Face 5mm Reinforced Adjusters (Long/8pcs.)54906: M-08 Concept Aluminum Shaft Set54969: 33mm Lightweight Aluminum Swing Shafts (2pcs.) 300047480

Tamiya is delighted to announce that this classic is once again to be produced, returning another big name to the 1/14 Scale Tractor Truck Series. The R/C model was first released back in 2000 and recreates the Volvo FH12, a huge-selling vehicle with 12-liter turbocharged "Euro 2" engine that won the Truck of the Year in 1994.FeaturesThis is a 1/14 scale R/C model assembly kit.Length: 440mm, width: 188mm, height: 295mm, wheelbase: 272mmThe stylish form of the FH12 is accurately captured.The chassis utilizes a tough ladder frame with aluminum side channels. A realistic drivetrain setup sees the front mounted motor powering the rear axle.3-speed transmission can be controlled via 4ch R/C transmitter.Highly realistic suspension employs metal leaf springs and friction dampers.Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer. 300056312

R/C fans have long been modifying their machines into rock crawlers. Tamiya has followed this growing segment with interest and we are now proud to present to you the fruits of our research. This new crawler features a true-to-scale Toyota Land Cruiser 40 body made from lightweight polycarbonate mounted on an all-new CR-01 chassis and is literally ready to rock.Features:Full Ball BearingsPlanetary gearbox comes with20T pinion gear40.5:1 gear ratioRequires ESC and 2ch Radio w/1 servoRequires Paint and Assembly 300058405

Tamiya is delighted to announce that the 1997 Mercedes-Benz CLK-GTR is now paired with the TC-01 chassis.(Item 47437 uses the TT-01 Type-E chassis.) The Mercedes-Benz CLK-GTR car took six wins in dominating the 1997 FIA GT Championship. Although inheriting the 2-door coupe form and front section of its base road car, it was actually vastly different. It used a carbon composite monocoque frame with roll cage, a rear 6-liter V12 engine capable of over 600hp, and 6-speed sequential transmission. Its 4-wheel double wishbone suspension featured front and rear pull-rod setups. In the same year, this car took both Manufacturer’s and Driver’s Championships.Product detailsThis is a 1/10 scale R/C model assembly kit. Length: 470mm, width: 194mm. Wheelbase: 257mm.The streamlined form of the 1997 Mercedes-Benz CLK-GTR is stylishly recreated in lightweight and durable polycarbonate.Separately molded white ABS plastic parts recreate side mirrors and rear wing.Silver mesh wheels are paired with racing slick tires. (The rear wheels are wide tread.)TC-01 chassisThis durable composite monocoque-frame chassis provides shaft driven 4WD from a central motor via front and rear propeller shafts, with oil filled gear differentials.4-wheel independent double wishbone suspension employs A-shaped long arms, plus inboard setups front and rear with oil dampers actuated by push rods and rocker arms.Use spacers and shims to easily alter camber, skid and toe angle settings.Both suspension arms and uprights are identical left, right, front and rear, for more efficient pit work.Rear transverse battery position is also compatible with 139x47x25mm square-shaped battery packs. 300058731

Tamiya is delighted to announce the release of the TT-02BR chassis in the TT-02B series which is popular among off-road racers. The TT-02BR chassis is an upgraded version of the TT-02B chassis kit with a wealth of parts, plus new aluminum propller joints and carbon fiber damper stays to ensure range of setup adjustments. 300058717

Tamiya is proud to announce a brand new 1/10 R/C 2WD off-road buggy model featuring the combination of classic design and modern performance. Its brand new chassis is a hybrid monocoque-roll cage and employs rear trailing arm suspension inspired by the full-size UTVs. The new body is designed by famed Japanese artistAtsushi Arino.This is a 1/10 R/C assembly kit. Length: 414mm, height: 136mm, width: 233mm. Wheelbase: 283mm.The classically designed 0.7mm thick polycarbonate body is designed by Atsushi Arino, and is split into three sections to recreate the tapered lower shape of the actual Utility Vehicle.Newly designed 2WD chassis is based on the one-piece monocoque frame and roll cage to allow use of realistic bodies.The BB-01 chassis also employs new front double wishbone suspension with A-shaped arms and rear trailing arm suspension with long trailing arms which are inspired by UTVs and give great performance.The 2WD chassis with rear motor features rear-positioned engine inspired by the same layout of the actual vehicles, and allows great rear traction.The four wheel double wishbone suspension system uses CVA oil dampers for superlative performance, and new front/rear aluminum aeration dampers for great performance and jazzy look.TA06 rear differential allows use of wealth of Grade-Up parts.Features full ball bearings and universal drive shaft.Rear roll cage can be removed by detaching screws, which ensures ease of maintenance around motor.New metal-plated beadlock type wheels are paired with new large-diameter tires.Driver figure and light cases are planned for extra realism, plus high-torque servo saver, and tire mount adapter. 300058719

This is a special edition of the R/C Scania R470 truck (original: Item 56318), the stylish 4x2 model that depicts a vehicle belonging to Scania’s International Truck of the Year 2005 award-winning R Series. It is a great option for those without the time or confidence to apply a paint job to their kit, as cab parts come pre-painted in TS-17 Gloss aluminum, and given a urethane coating for a beautiful, lasting finish.FeaturesThis is a 1/14 scale R/C model assembly kit. Length: 452mm, width: 187mm, height: 293mm.The classic form of the R470 is recreated accurately, complete with cab that tilts forward separately from fenders, just like on the full-sized truck. Cab, F, H, K, and M parts are molded in gray and pre-painted in Gloss aluminum (TS-17), with a urethane top coat for a stunning finish.Interior features such as seat and dashboard are depicted.2-axle chassis utilizes ladder frame with aluminum side channels and resin cross members. Realistic drivetrain has a front mounted motor powering twin rear axles.3-speed transmission can be controlled via 4ch R/C transmitter.Highly realistic suspension employs metal leaf springs.Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer.Compatible with a range of tractor truck option parts (TROP). Use with Multi-Function Control Unit MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic lights and sounds. 300056364

This remote-controlled chassis kit produces a buggy with 2-belt drive and identically long belts for optimum power transmission balance. The kit includes a wide range of hop-up option parts for outstanding off-road performance and improved durability! In addition, the kit includes the Baldre body (item 51338) for a sleekoff-road look!4WD 2-piece belt drive DB01SR chassisThe DB01's 4WD system features a centrally located spur gear that drives two belts. Both the spur gear and drive belts are protected by plastic covers that prevent dirt and debris from interfering with the drivetrain. The front and rear bulkheads are integrated into the chassis, simplifying assembly and maintenance. To ensure that the chassis can withstand the stresses of off-road racing, it is made of glass fibre reinforced nylon material for greater strength. In addition, the underside of the chassis is completely flat, providing excellent gliding properties.Kit features1:10 scale model kit for remote-controlled models.A slip clutch (from item 54018 DB01 Slip Clutch Set) ensures stable off-road drive.With oil-filled gear differentials.The gear differentials (from item 54329 DB01 Gear Differential) feature steel bevel gears (from item 54428 Steel Bevel Gears for TA06 Gear Differential), which require less maintenance and are compatible with high-performance motors.Front and rear drive shafts ensure efficient drive and minimal maintenance.Hex hubs at the front and rear allow for a wide selection of wheels and tyres.The battery compartment of the chassis is suitable for square batteries.Special paint stickers, window cover stickers and a Baldre body are included. NOTE: Original Baldre body stickers are not included.The packaging can be used as a carrying case.Required for completion: 2-channel remote control, steering servo, ESC, motor, 7.2-7.4 volt battery with compatible charger, and Tamiya PS paint. 300058753

Originally released in 1979, the R/C Sand Scorcher was greatly received from fans around the world with its humorous form and superb mechanism. Keeping true to the basic layout of the original while incorporating many refined parts, this re-released version of the Sand Scorcher will remind you of the original. This model realistically reproduces the unique form of the buggy which was seen at the one-make race at the "Baja 1000" in California, USA. The body is molded in white polystyrene and can be painted with Tamiya plastic model paints. The rear-wheel drive 2WD chassis features realistic and aggressive driving performance that will no doubt excite you.Chassis layout:Chassis features a 2mm thick FRP plate with an aluminum reinforcing plate for strength and flexibility to ensure stability. 4-wheel independent suspension features front double trailing arm and rear swing axle setups, die-cast suspension arms, and oil dampers. Electronics and battery are protected by a durable clear plastic mechanism box. Comes equipped with full ball bearings to reduce friction loss, and mounted on the 3-piece center-lock wheels are grooved front tires and ribbed rear tires that ensure superb off-road performance.Features:1/10 scale R/C assembly kit of the Sand ScorcherComes equipped with full ball bearings to reduce friction lossType 540 motor includedA duraluminum plate reinforced 2mm thick FRPmain frame for added strengthNewly designed die-cast front and rear suspensionarms, front axle, and wheel hubsTransparent case protects the R/C mechanismsReinforced front uprightsRedesigned oil dampersDetailed hard plastic body included 300058452

The first European three-axle tractor from TAMIYA! With the Scania R470 thrilling the truck modeling scene, TAMIYA is now expanding its three-axle series with the Scania R620 to include this extremely attractive European tractor. With the over 50 cm long and about 3 kg heavy replica of the Scania R620, impressive sidecars can be put together in a new dimension. Below the forward tiltable cab is the proven and robust Tamiya truck technology. A powerful electric motor delivers its power to the two rear axles via a shiftable 3-speed transmission. A detailed aluminum ladder frame gives the RC model the stability it needs. Thanks to its high unladen weight and a fifth wheel plate, the R620 can be coupled with numerous TAMIYA and CARSON-MODEL SPORT trailers.Features: faithful 2-Axis-Drive polystyrene driver's cab driver's cab tiltable to the front Aerodynamic package faithful interior design Aluminium ladder frames with plastic reinforcements Rear axle with metal bevel gears Metal bevel gear differential 3-speed manual transmission semitrailer plate (suitable for all Tamiya and Carson trailers) Leaf spring assemblies with struts on front and rear axle aluminium front axle aluminium drive shafts 300056323

The 2012 Truck of the Year award-winning Actros series is the flagship of the worlds leading truck manufacturer, Daimler. Its latest installment, the rear-wheel drive Actros 1851 GigaSpace runs on a 12.8-liter 6-cylinder turbo-charged engine generating 510hp and is used for long-distance haulage, heavy duty distribution haulage, construction haulage and so on.The Tamiya 1/14 scale R/C kit faithfully captures all the detail of the full size rig using ABS plastic for the body parts and a 3-speed, shift on the fly working transmission.FeaturesLength: 458mm, Width: 195mm, Height: 305mm.Ladder frame chassis can be linked with a semi-trailer via coupler.Highly-realistic suspension recreated with metal leaf springs and friction dampers.Built-in differential gears enable smooth cornering.LEDs can be used to accurately recreate the truck?s front and rear lights. (Sold Separately)Float-mounted die-cast front axle and reinforced resin rear axle. 300056335

Ford trucks are among the most popular vehicles in the United States! Among those are the F-150 series. Tamiya now brings back one of its classic Ford truck releases in the form of the iconic FORD F-150 Ranger XLT with various updates.About the FORD F-150 XLTThe Ford F-150 Ranger XLT was originally released as a 1/10 R/C kit in 1981. The 1980 Ford F-150 Ranger was released as the first model of the seventh-generation model of the F series, and it featured angular design cues and robust ladder frame. The truck prioritized both lightweight and durable design. The Ranger grade is positioned as the advanced specification and has extensive outside features such as 2-tone paint and chrome trim. As an option to the truck, Free Wheeling Package added unique characteristics such as stripes and special color scheme.The re-release inherits the existing body of the original, but features newly molded side mirrors, wipers, headlights (separately sold LED lights can be attached.), front section including front grille and bumper guards, plus front stealth body mount (eliminated front body mount holes) for a more realistic look.1/10 scale R/C model assembly kit. Length: 430mm, width: 215mm, height: 185mm. Wheelbase: 250mm. Weight: 1,880g.Based upon the existing body, the kit features newly molded side mirrors, wipers, headlights (separately sold LED lights can be attached.), front section including front grille and bumper guards.Body can be mounted inside at the front to eliminate front body mount holes for a more realistic look.Front and rear Ford emblems are realistically recreated.Cab-side triangle windows are added.Updated stickers are included.3-piece center-lock wheels are paired with semi-pneumatic block pattern tires.Includes 540-Type motor and ESC.Required to complete: 2-channel radio, steering servo, 7.2-7.4volt battery with compatible charger and Tamiya TS paints. 300058759

The TAMIYA Scania R620 in the Blue Edition is a truly impressive tractor, as it is often seen on Europe's roads. The cab is already pre-painted in blue (TS-51 Racing Blue) and covered with clear lacquer. The over 50 cm long and around 3 kg heavy replica of the Scania R620 allows impressive teams to be put together. Under the forward tilting cab is the well-proven Tamiya truck technology. A type 540 electric motor transfers its power to the two rear axles via a shiftable 3-speed gearbox. A robust aluminium ladder frame gives the RC model the required stability. The Scania R620 Blue Edition can be coupled to numerous TAMIYA and CARSON-MODEL SPORT trailers thanks to its high weight and semi-trailer plate.Features:true to original 2-axle drive Polystyrene cab Cab tiltable (forward) aerodynamic package authentic interior Aluminium ladder frame with plastic reinforcements Rear axle with metal bevel gears metal bevel gear differential 3-speed manual gearbox semi-trailer plate (suitable for all Tamiya and Carson trailers) Leaf spring packages with shock absorbers on front and rear axle aluminium front axle Aluminium drive shafts Electric motor type 540 300056327

After a complete model overhaul in February 2007, Toyota released a full-size pickup truck built to “US dimensions” — the Toyota Tundra. Due to rising oil prices and high demand for fuel-efficient Japanese vehicles, the Tundra sold very well. The TAMIYA model faithfully replicates the Tundra’s modern appearance and also delivers excellent driving performance. A double cab version was chosen for the body style. The kit includes numerous tuning parts to enhance the body just like a real pickup truck. The detailed pickup body is mounted on the same chassis as the Ford F-350 High-Lift, combining nostalgic design with modern mechanics.The radio-controlled Toyota Tundra High-Lift impresses at first glance with a wealth of features: authentic lettering, molded turn signals, light bars, a true ladder frame, and even functional leaf springs. Mud and muck are no problem for the all-wheel-drive chassis. In addition to its permanent 4x4 drive, the model features manually lockable differentials. And if a slope gets too steep? Simply downshift — because this mini Tundra even features a selectable 3-speed transmission. The sturdy body with its bold grille and the massive ladder frame can take a beating, while the chunky tires tackle any terrain with ease. For even more realism, the optional multifunction unit B-No. 65636 can be installed.Features:3-speed shiftable transmission4WD drivetrainManually lockable differentialsMetal gearboxes (front/rear)Torsion-resistant U-profile steel ladder frameUniversal drive shafts (front/rear)Optional four-wheel steering (parts included)4 metal leaf springs with aluminum friction dampersAggressive off-road tiresQuick-release battery holderSlipper clutchSolid front bumper (aluminum/plastic)Chrome detail partsChrome-plated wheels with “bead lock rings” 300058415

This 1/14 scale tractor truck recreates the Mercedes-Benz Arocs 3363 3-axle truck, which is the first narrow bodied European tractor model in the Tamiya Tractor Truck Series. The full-size subject is the German company's heavy duty tractor head that debuted in 2013. Powered by a 630hp 15.6-liter inline-6, the actual Arocs is capable of hauling massive loads of up to 250 tons.The Tamiya rendition faithfully captures the truck's modern form with the use of ABS plastic body parts and a number of metal chassis components. One look at the detailed interior and auxiliary equipment, such as air tanks, will confirm that the body features replica-quality realism, which is further enhanced with metal transfers depicting emblems and numerous metal-plated parts. The chassis is built for durability as it uses aluminum side channels with resin cross members. Drivability is accomplished by power from the front-mounted motor and is transmitted via a propeller shaft to the rear axle; built-in differential gears guarantee smooth cornering. Gear changes can be made via a separately-sold Tamiya 4-channel transmitter.Features1/14 scale R/C model assembly kit. Length: 529mm, width: 190mm, height: 267mm.The narrow body of the ClassicSpace variant Arocs 3363 is recreated accurately using newly-molded parts, complete with the distinctive "bucket-tooth" grille. Photo-etched parts recreate cab rear platform.Interior details include: seat and dashboard.3-axle chassis utilizes a tough ladder frame with aluminum side channels and resin cross members.A realistic drivetrain setup sees the front mounted motor powering twin rear axles.3-speed transmission can be controlled via a 4ch R/C transmitter.Highly realistic suspension employs metal leaf spring dampers and friction dampers.Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailers.Compatible with the tractor truck option parts (TROP) Items 56531, 56532, 56536 and 56538. Use with Multi- Function Control Unit MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic LED lights and sounds.Requires: 4-Channel radio, One Servo, ESC, 7.2volt battery with charger, and Tamiya TS-Paint. 300056352

This is a color variation of the R/C Man TGX 26.540 6x4 XLX (original: Item 56325) which depicts a vehicle produced by MAN Company and awarded "The 2008 Truck of the Year." This model is great for those without the time or confidence to apply a paint job to their kit, as cab parts molded in blue are pre-painted in TS-54 Light Metallic Blue and given a urethane coating for a beautiful, lasting finish.FeaturesThis is a 1/14 scale R/C model assembly kit. Length: 526mm, width: 193mm, height: 301mm.The form of the TGX 26.540 6x4 XLX is captured in style.Cab, F, H, K, M and CC parts are molded in blue and pre-painted in Light Metallic Blue (TS-54), with a urethane top coat for a stunning finish.The ladder frame chassis features aluminum channels, suspension with metal leaf springs and friction dampers, and rear axles equipped with differentials.3-speed transmission can be controlled to allow gear shifts via 4ch R/C transmitter.Just like the actual vehicle, this model comes with large-sized curved side mirrors that feature two mirror surfaces.Both rear axles are equipped with differentials.Metal-plated parts are included to depict the MAN EURO 5 engraving and right/left step plates.Metal transfers also recreate the MAN logo/Lion emblem on the front grille and TGX 26.540 logos on both doors respectively.*Multi Function Control Unit (MFC-03, sold separately) offers light, sound, and vibration operation. Built_in ESC allows a low-speed driving to enable connection to a trailer. 300056370

Tamiya welcomes the Volvo FH16 Globetrotter XL 750 4x2 Tractor in our popular 1/14 Tractor Truck series! The FH16 series is the flagship of Swedish manufacturer Volvo Trucks and it was the result of a model change in 2012. The top-class Globetrotter XL offers comfortable interior space and superior aerodynamics, and allows long-distance travel coupled with a high-output 750hp engine.Product detailsThis is a 1/14 scale R/C model assembly kit.Length: 462mm, width: 193mm, height: 309mm (excluding side mirrors, antenna, etc.).The model authentically depicts the Volvo FH16 Globetrotter XL 750 4x2 Tractor with the FH series’ top-class Globetrotter XL roof shape.The cab is faithfully recreated by precise injection molding, and the distinctive front grille is captured by photo-etched parts.Includes parts to render customized sections such as a roof bar featuring light pods, low bar and side bars. LEDs (sold separately) are also attachable.Just like the actual vehicle, this model has rear-axle drive 4x2 chassis, and has the motor and transmission at the front of a metal ladder frame.Assembly type 3-speed transmission allows gear changes via separately available 4-channel transmitter.Multi-Function Control Unit (Item 56523: MFC-03, sold separately) offers light, sound, and vibration operation.Interior parts such as modern-design dashboard and seats are included, and can be installed together with the Multi-Function Control Unit.Compatible with a wealth of Tractor Truck Option Parts.Includes a 1/14 scale driver figure.Please note that the Finespec 2.4GHz R/C system, Multi-Function Control Unit (MFC-03) (*), servos (x2), 7.2V battery pack and battery charger included only for Japan Market (Item 56374).WARNING!Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model.When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury.Read and follow the instructions supplied with paints and/or cement, if used (not included in kit).Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.Not suitable for children under 14 years. 300056375

The latest addition to Tamiya"s 1/14 scale R/C Tractor Truck series is the MAN TGX 26.540 6x4 XLX. This impressive truck, which made its debut at the 2007 European Transport Road Show in Amsterdam, was the winner of the 2008 Truck of the Year award. It features two rear axles which assist in the carrying of heavy loads over long distances. It is powered by an in-line 6 cylinder 12.4 liter turbocharged diesel engine which meets the stringent Euro 5 emissions standards to make it more environmentally friendly.Features:Length: 526mm Width: 193mm Height: 301mmWheelbase: 237+103mmTread F/R: 156/138mmTire Width: F/R both 22mmDiameter: F/R both 83mmGear Ratio: 1st gear 32.49:1, 2nd gear 17.76:1, 3rd gear 10.66:1Suspension leaf springTerrain Use on-road 300056325

The Mighty King Hauler resembles the classic conventional American tractor truck. Powered by it's 540 motor driven with a 3-speed transmission, which has no problem turning the dual rear axles. Each axle is supported with leaf spring and shocks. The metal C-Channel ladder frame, keeps the power to the pavement.Whether by itself or coupled to an optional trailer, the King Hauler is sure to turn heads.Features:Total length: 630mm Total width: 186mmWheelbase: 447mmTread F/R: 156/138mmTire Width: F/R both 22mmDiameter: F/R both 83mmGear Ratio: 1st gear 32.49:1, 2nd gear 17.76:1, 3rd gear 10.66:1Weight Fully-Equipped: about 3,1kg (without multi function unit)Clearance: 19mm 300056301

This is a highly accurate 1/14 scale radio control model that recreates the Mercedes Benz Actros 3363 3-axle truck. The Actros series debuted in 2011 and was named 2012 Truck of the Year. Powered by a 15.6-liter inline-6 turbocharged diesel putting out a max of 630hp, the actual 3363 can haul up to 250 tons!The Tamiya rendition faithfully captures the truck's modern form with the use of ABS plastic body parts and a number of metal chassis components. One look at the detailed interior and auxiliary equipment, such as air tanks, will confirm that the body features replica-quality realism, which is further enhanced with metal transfers depicting emblems and numerous metal-plated parts. The chassis is built for durability as it uses aluminum side channels with resin cross members. Drivability is accomplished by power from the front-mounted motor and is transmitted via a propeller shaft to the rear axle; built-in differential gears guarantee smooth cornering. Gear changes can be made via a separately-sold 4-channel transmitter.The Actros' realism can be further heightened with separately-available trailers that can be attached to its coupler and make the model over a meter in length!FeaturesThe body of the Actros 3363 is recreated accurately using newly-molded parts differentiating it from the 1851 spec modelThe tried and tested Tamiya 3-axle chassis utilizes a tough ladder frame with aluminum side channels and resin cross members. A realistic drivetrain setup sees the front mounted motor powering twin rear axles.3-speed transmission can be controlled via 4ch R/C transmitter. Item 7255252 is the perfect radio to compliment the Actros kitMetal leaf spring dampers with built-in coil springs provide durable suspensionCoupler is included to enable connection with any currently available Tamiya 1/14 scale trailersCompatible with the tractor truck option parts (TROP) Items 56531, 56532 and 56536. Use with Multi-Function Control Unit MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic LED lights and soundsCompatible with the tractor truck option parts (TROP) Items 56531, 56532 and 56536. Use with Multi-Function Control Unit MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic LED lights and sounds 300056348

The FH series was released in the fall of 1993 and became Volvo's primary truck. The following year, it was awarded the prestigious "Truck of the Year" title. It's huge 12-liter inter cooled turbo diesel engine is known as the "Euro 2", and is the result of state-of-the-art engineering technology.Features:Length: 17.32 inches (440mm) Width: 7.40 inches (188mm)Wheelbase: 10.71 inches (272mm)Front Tread: 6.14 inches (156mm) Rear Tread: 5.43 inches (138mm)Weight: 5.07 lbs. (2300g)Chassis: Aluminum ladderGear Ratio: 10.6:1 - With the 3-speed gearbox, 10.6:1, 17.7:1 and 32.4:1 are possibleWheels & Tires: Chrome/Radial 300056314

The TRF104 is a high-spec formula one chassis that takes the genre to a new level! This hi-spec 2WD formula chassis, built around carbon fiber and aluminum chassis components, with the front lower arms crafted from carbon fiber plate, makes it a formidable opponent on the racetrack! Furthermore, the chassis features updated front and rear suspension, plus an updated R/C equipment layout which is compatible with Li-Po batteries.Key New Features:Updated front suspension:Features plastic upper A-arms.Camber angle is adjustable freely from +1 to -3 degrees (approximate) using a 2mm hex wrench.Caster angle is also adjustable at 6, 9 and 12 degrees. (approximate).Updated rear suspension:Suspension link and T-bar setup are not used. Instead, ball connectors are equipped at motor mount front and rear, and suspension roll is placed at the center of the chassis.The model centering is controlled by roll springs under the rear shaft, and friction grease on roll dampers at motor mount allow adjustment of roll speed.The pitching is controlled by FRP suspension plate flex and a TRF damper.R/C equipment layout:Formula chassis can lose rear grip because of unbalanced weight. To prevent this problem, battery pack, receiver and servo are positioned at the center of chassis to ensure better rear grip.Compatible battery packs:A square-shaped battery holder is included, for Li-Po battery packs to comply with U.S. open-class regulations.Motor mount:Motor mount has parts for adjustment of ground clearance and wheelbase: 5 types of ground clearances are adjustable in 0.8mm steps and two wheelbases can be chosen with a difference of 2.5mm.Steering servo & steering linkage:The laid down steering servo is positioned about 30mm backwards compared to the TRF103 chassis and ensures a low center of gravity.Features a choice of 4 types of steering linkage adjustments over a range of about 1.8mm length by changing Ackerman plate position to keep direct steering.Rear differential unit:The rear differential unit is the same as the one used for the TRF103 chassis. Lightweight and durable carbon fiber shaft limits weight and ensures compatibility with rubber tires which are relatively heavy.Two rear wing mount options:A 2mm thick carbon fiber plate is used to attach the rear wing. In this case, the rear wing is connected to the motor mount, and it moves along with rear suspension.When adding separately sold Item 53596 Aluminum Servo Stays (Short) as wing mount to attach rear wing, rear wing is connected to suspension plate, and it does not move along with rear suspension. (It remains horizontal even if rear suspension moves.)Front suspension arms:2.5mm thick carbon fiber front lower suspension arms have two attachment positions (3mm adjustment for each side) to adjust its width and attach wheels with different offsets.If using separately sold Item 54153 (F103 Carbon Reinforced Front Suspension Arm) and 53119 (RD Special King Pin Set), the width can be changed to the same 200mm width as the TRF 103 chassis.Full ball bearings:1060 Sealed Flanged Ball Bearings (New) x2.1050 Sealed Ball Bearing 4 pcs.1150 Sealed Ball Bearing 1pc.1280 Sealed Ball Bearing 1pc.Specifications:1/10 scale R/C model assembly kit. Length: 325mm (excluding front and rear wings), width: 169mm (front axle width excluding front and rear wheels), height: 46.5mm (excluding body mount).Required to complete: 2-channel radio, steering servo, ESC, 540-size motor, 7.2-7.4volt battery with compatible charger, F-1 body parts set, F1 wheels & tires, and Tamiya PS paint. 300042389

Owners of Tamiya's 1/14 R/C trucks have been calling for a 3-axled trailer to better recreate the load outs of trucks in their respective countries. We are now proud to present this brand new 3-axle Reefer (Refrigerated) Semi-Trailer to further distinguish our unique lineup of R/C truck products.FeaturesEuropean style Semi-trailer with 3-axlesABS parts used to make the Box TrailerVinyl stickers inlcuded 300056319

Tamiya’s series of ultra-realistic 1/14 scale R/C trucks offer fun and realistic driving! This kit adds to the selection of trucks available in the series with the Scania 770 S 4X2!The Scania 770 S 4x2 is a single front steering, single rear-axle drive four-wheel heavy trailer head equipped with a 16.4-liter V8 turbo engine capable of 770hp. It was added in 2020 to the Swedish manufacturer Scania’s top-grade S Series. The 4x2 trailer heads are versatile and are a popular type of truck in Europe and in our line-up of kit offerings. This kit also has accessory parts to recreate a customized version like those which are trendy in Europe.1/14 scale R/C model assembly kit. Length: 469mm, width: 193mm, height: 315mm (excluding side mirrors, antenna). Wheelbase: 272mm. (35mm longer than Item 56368. )Just like the actual vehicle, a single front steering, single rear-axle drive 4x2 chassis features a layout of motor and transmission positioned at front.Features realistic depictions of accessory parts such as roof high bar with LED light bar, horns, name board, drop visor, bull bar, low bar and side bar. LEDs (sold separately) are also attachable.Choose between normal and customized versions.New parts to recreate side skirts and auxiliary machinery are included.Interior parts such as modern-design dashboard and seats are included and can be installed together with the Multi-Function Control Unit (Item 56523: MFC-03, sold separately) which offers light, sound, and vibration operation.Assembly type 3-speed transmission allows gear changes via separately available 4-channel transmitter.Compatible with a wealth of Tractor Truck Option Parts.Includes a 1/14 scale driver figure.Required to complete: Tamiya 4-channel Attack radio, servos X2, ESC, 7.2volt battery with compatible charger, and Tamiya modeling paints. 300056379

Meet the latest addition to the 1/14 scale Tractor Trucks series! This model is based upon that Tamiya classic, the King Hauler (Item 56301). The King Hauler body is given an overhaul with numerous newly-designed parts inspired by the modern day trend of tractor truck customization. A number of metal and metal-plated resin parts further add to the mood of the model. Its longer frame gives the model proportions reminiscent of show trucks.FeaturesThis is a 1/14 scale R/C model assembly kit. Length: 692mm, width: 190mm, height: 300mm.The realistic, lengthened body features newly-designed parts depicting front and rear bumpers, front grille, air cleaners and muffler covers. Muffler covers are made from metal tubing.Features a tough ladder frame construction with aluminum side channels and resin cross members. Realistic drivetrain setup sees the front mounted motor powering twin rear axles.3-speed transmission can be controlled via 4ch R/C transmitter.Metal leaf spring dampers with built-in coil springs provide durable suspension.Newly-designed 1/14 scale driver figure included.Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer.Compatible with the tractor truck option parts (TROP) Items 56511, 56512, 56513, 56515, 56524, 56526 and 56530. Pair with Multi-Function Control Unit MFC-01 (Item 56511) and MFC-03 (Item 56523) for super-realistic LED lights and sounds. 300056344

The Tamiya 1/14 scale Fuel Tank Trailer has been revamped! This fuel tank trailer features a newly-designed original and imagined livery that was inspired by fuel tank trailers seen in the United States. The chassis and tank parts are based on Item 56303.Features:Aluminum ladder frame chassis features 2-axle, 8-wheel design.Stainless steel construction fuel tank.Metal-plated ladder, fenders, and wheels.New original livery.The tanker trailer may be coupled with any of Tamiya's 1/14 scale R/C tractor truck models.Optional Item 56505 Motorized Support Legs enables realistic trailer attachment/detachment. 300056333

Tip-Top!The Arocs series is a line of heavy-duty models introduced in 2013 by the world's leading truck manufacturer, Daimler AG (Germany). This R/C model assembly kit recreates the dual rear axle-driven Arocs 3348 6x4 tipper truck, which runs on a 12.8-liter turbocharged inline-6 engine capable of 480hp. The highly detailed body breathtakingly captures the slimline form of the truck cab, including the distinctive bucket tooth design grille. Depictions of headlight guards, front bumper and skid plate underneath are parts of a truly realistic finish. The assembly type 3-speed transmission allows gear changes via separately available 4-channel transmitter. The ladder frame chassis features aluminum side channels with resin cross members. A realistic 1-piece resin bed is reinforced with a metal frame. Power from the front-mounted motor is delivered to rear axles via propeller shaft; a built-in differential gear on each axle enables smooth cornering. Highly-realistic suspension utilizes metal leaf springs and friction dampers. The model enjoys easy driving thanks to the float-mounted die-cast front and reinforced resin rear axles.FeaturesLength: 576mm, Width: 190mm, Height: 267mm,Weight: Approx. 4.3kg (*with R/C equipment andbattery pack attached)Wheelbase: 257mm+103mmTread: 156mm (Front), 138mm (Rear, Double Tire)Chassis: Aluminum & Polycarbonate Resin Ladder Frame Suspension: Front/Rear Leaf SpringsCaster Angle: 0° (Front & Rear)Camber Angle: 0° (Front & Rear)Toe Angle: 0° (Front & Rear)Dampers: Front/Rear Aluminum Friction DampersDrivetrain: Rear 2-Axle DriveTransmission: 3-Gear Transmission (gear shiftingoperated from transmitter)Gear Ratio: (1st Gear) 32.49:1, (2nd Gear) 17.76:1,(3rd Gear) 10.66:1Diff Gear: 3-Bevel Diff.Motor: TR Mighty-Tuned (35T)Tire Width/Diameter: 22/83mm (Front), 22/84mm(Rear) 300056357

Tamiya welcomes a new addition to 1/14 Tractor Truck Series – this time, the Scania 770 S 6x4 produced by the Swedish manufacturer Scania. The Scania 770 S 6x4 is one of the trailer heads in the Scania’s top-grade S Series – which had undergone a full model change in 2016. This trailer head features a double rear-axle drive 6x4 chassis equipped with a 16.4-liter V8 diesel turbo engine capable of 770hp which was the most powerful in the industry as of 2020.FeaturesThis is a 1/14 scale R/C model assembly kit. Length: 532mm, width: 193mm, height: 307mm.The model realistically depicts the Scania 770 S 6x4.The high-roof form is realistically captured in style with a roof bar featuring light pods, grille mini bar, low bar and side bars. LEDs (sold separately) are also attachable.Just like the actual vehicle, a double rear-axle 6x4 chassis features a layout of motor and transmission positioned at front.Ladder frame features aluminum side channels with resin cross members, and is equipped with a coupler to enable linkage with semi-trailers.Highly-realistic suspension utilizes metal leaf springs and friction dampers.Interior parts such as modern-design dashboard and seats are included.Assembly type 3-speed transmission allows gear changes via separately available 4-channel transmitter.Please note that the Finespec 2.4GHz R/C system, Multi-Function Control Unit (MFC-03) (*), servos (x2), 7.2V battery pack and battery charger included only for Japan Market (Item 56367).Multi-Function Control Unit (Item 300056523: MFC-03, sold separately) offers light, sound, and vibration operation. 300056368

Re-issue of the RC model Toyota 4x4 Pickup Bruiser from 1985.Features:Prepared for light installation in the body.Body with interior fittings (interior).complete with ball bearings.Front and rear axle each with differential.Differentials lockable from the outside by screw.Many metal parts.3-speed manual transmission via multi-channel RC system Switchabledrive: 2WD / 4WD (4WD all-wheel drive only in 1st gear)Wheel suspension front / rear: rigid axle with differential 300058519

This is a special edition of Item 56344 Grand Hauler, the iconic North American big rig announced in 2015. It is a great option for those without the time or confidence to apply a paint job to their kit, as the body, H, P, and Q14/Q15 parts of the kit arepre-painted Metallic black (Tamiya Color TS-40), and – in a first for the 1/14 R/C Tractor Truck series - given a matte coating which provides a cool look and protection from damage.FeaturesThis is a 1/14 scale R/C model assembly kit. Length: 692mm, Width: 192mm, height: 330mm.The boxy, customized Grand Hauler form is a real eye-catcher. Body, H, P, and Q14/Q15 parts are molded in black, pre-painted in Metallic black (TS-40), and given a matte urethane top coat for a stunning finish.The matte paint job adds further emphasis to the numerous metal-plated parts, which include bumpers, radiator grille, roof-top horn and light bezel parts, side and kerb mirrors, air cleaners, mufflers and more!The tried and tested Tamiya 3-axle chassis utilizes a tough ladder frame with aluminum side channels and resin cross members. A realistic drivetrain setup sees the front mounted motor powering twin rear axles.3-speed transmission can be controlled via a separately sold 4ch R/C transmitter.Metal leaf spring dampers with built-in coil springs provide durable suspension.Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer.Compatible with separately-sold Multi-Function Control Unit MFC-01 (Item 56511) (or MFC-03, Item 56523) for realistic LED lights and sounds. 300056356

This is a special edition of the R/C Mercedes Benz Arocs tipper truck (Item 56357), the stylish 3-axle truck with movable bed and distinctive bucket tooth grille. It is a great option for those without the time or confidence to apply a paint job to their kit, as parts come pre-painted in TS-8 Italian red (cab, H, K, and M parts) and TS-17 Gloss aluminum (rear bed and CC parts), and given a urethane coating for a beautiful, lasting finish.FeaturesThis is a 1/14 scale R/C model assembly kit. Length: 576mm, Width: 190mm, height: 267mm.The Arocs 3348 form is recreated by an injection molded body, with separate side mirrors and visor, etc.Cab, H, K, and M parts are molded in red PS and pre-painted in Italian red (TS-8), while bed and CC parts are molded in gray ABS and pre-painted in Gloss aluminum (TS-17). All have a urethane top coat.The 3-axle chassis has a tough ladder frame with aluminum side channels and resin cross members.Truck bed section is comprised of metal subframe and resin panel sections for superb durability.Compatible with Electric Actuator Set (Item 56545) for realistic truck bed motion.TR mighty-tuned motor (35T) provides twin rear axles with ample power to carry loads in the bed.Rear tires, rear fenders and taillights have dedicated tipper truck model designs.3-speed transmission can be controlled via a separately sold 4ch R/C transmitter.Metal leaf spring dampers with built-in coil springs provide durable suspension.Compatible with MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic lights and sounds. 300056361

The King Hauler Black Edition is a special version to celebrate the 20th anniversary of the TAMIYA tractors, which started in 1993 with the King Hauler N° 300056301. The King Hauler offers truck technology proven a thousand times over and a spectacular appearance. The driver's cab and the prototypical technology, with 3-speed manual transmission, make for a grand entrance. The two rear axles are driven by cardan shafts and the large trailer program of TAMIYA and CARSON-MODEL SPORT allows the reproduction of impressive sidecars. Thanks to its high dead weight and a saddle plate, the King Hauler can be coupled to numerous TAMIYA and CARSON-MODEL SPORT trailers. With the optionally available multifunctional unit, almost all sound and light functions of the prototype can be simulated.Features:Polystyrene driver's cab and P-parts are metallic-black pre-painted Cab tiltable (forward) incl. fanfares Aluminium ladder frame with resin struts rear axle with metal bevel gears Metal bevel gear differential rigid axles with leaf springs chromed rims Headlights and indicators can be retrofitted with LEDs synchronized 3-speed manual transmission prototypical 2-axle drive by shaft drive completely illuminable true-to-original interior design Saddle plate (fits all Tamiya and Carson trailers) Electric motor type 540 300056336

This R/C model recreates a 40-foot container with 3-axles. The regular height container can be connected to any of our 1/14 scale Tractor Trucks.1/14 scale model assembly kit. Length: 917mm, width: 188mm, height: 300mm.40-foot container x13-axle semi-trailer (for both 20ft. and 40ft. containers) x1The plastic parts realistically recreate the top, front, and side panels of 40-foot containers, each with their own distinctive panel patterns. Use Tamiya Color paints for painting.The twist lock system gives authentic attachment and detachment of container and trailer. Die-cast twist lock and steel attachment parts also ensure rigidity.Metal parts in both 40-foot container and 3-axle semi-trailer.Can be connected to any Tamiya 1/14 scale Tractor Truck (sold separately). 300056377

The stable of Tamiya 1/14 scale R/C trucks welcomes a new type in this assembly kit model of a timber truck with long rear bed featuring distinctive frame and stakes for carrying logs. The model depicts the Volvo FH16 Globetrotter, a 750hp 16.1-liter turbocharged engine powered truck from the Swedish company’s flagship FH Series that underwent a full model change in 2012.FeaturesThis is a 1/14 scale R/C tractor truck model assembly kit. Length: 733mm, width: 194mm, height: 306mm.The highly accurate body captures the FH16 Globetrotter form, with stainless steel photo-etched front grille, and cab interior details.Depictions of stakes (these are fixed to the model for safety purposes) and cab rear headboard use a durable combination of resin and metal.Assembly type 3-speed transmission allows gear changes via separately available 4-channel transmitter.Ladder frame features aluminum side channels with resin cross members.Power from the front-mounted motor is delivered to rear axles via propeller shaft. A built-in differential gear on each axle enables smooth cornering.Highly-realistic suspension utilizes metal leaf springs and friction dampers. The model enjoys easy driving thanks to the float-mounted die-cast front and reinforced resin rear axles.TR Mighty Tuned motor (35T) provides plenty of power, even when driving with loads.Printable templates for the creation of paper craft logs (for display only, not recommended for use when the model is driven) will be provided to agents, and available for download from www.tamiya.com.LED cables in Multi-Function Control (MFC) units are not compatible with this model. Customers will need to purchase separately available longer-cabled LEDs (Items 56549-56551) if using MFCs.Compatible option parts (TROP) include Items 56523, 56531, 56532, 56538 and 56548. 300056360

The TAMIYA truck for tough construction site use! The Mercedes-Benz Arocs 4151 8x4 is a real heavyweight on the job site. TAMIYA has modified the proven chassis for this truck: just like the original, it features 4 axles. The two rear axles are powered by a strong 540 electric motor, while the two front axles are steered by a servo (sold separately). The steering angles of the two axles differ, ensuring realistic driving behavior.The frame has a subframe to accommodate the newly designed dump bed. The bed is reinforced with a metal subframe and can be operated via the optional TAMIYA ACU-01 unit (56545).The unmistakable design of the new Arocs is as striking as the truck itself. Its construction-specific look features a grille in a so-called “excavator tooth” design, symbolizing “bite through and grab on.” Matching the rugged appearance, the bumper is equipped with protective grilles for the lighting system.The cab as well as the H, K, M, HH parts, and the dump bed are molded in green plastic and pre-painted in TS-52 Candy Lime Green and TS-29 Semi-Gloss Black with clear coat. The L parts (interior) are made of black plastic (original was white). At 667 mm long and around 4 kg in weight, the kit model allows for impressive setups. Beneath the tilting cab lies TAMIYA’s proven, robust truck technology. A new Mighty-Tuned 35T electric motor delivers its power via a 3-speed transmission to the two rear axles. A detailed aluminum ladder frame provides the required stability and flexibility.At the rear of the frame, a tow hitch (e.g. Carson 500907182) can be installed to pull trailers. With the optionally available multifunction unit, nearly all the sound and light functions of the original vehicle can be simulated with impressive realism.1/14 scale kit modelDimensions: length 667 mm, width 196 mm, height 268 mmTAMIYA 4-axle chassis with reinforced frame and drive to both rear axlesBoth front twin axles steered by a steering servo; axles steer at slightly different angles for realistic behaviorTrue-to-original ABS body reproduction of the Arocs 4151 including handrails, steps, side mirrors, and moreDump bed with a metal subframe; can be operated via separately available ACU-1 (300056545) (requires TAMIYA MFC-03 unit 56523)Cab, H, K, M, HH parts, and dump bed made of green plastic, pre-painted in TS-52 Candy Lime Green and TS-29 Semi-Gloss Black with clear coatL parts (interior) made of black plastic (original was white)Includes TR Mighty-Tuned motor for optimal power delivery to the two driven rear axles3-speed transmission controllable via optional 4-channel remote controlLeaf springs on axles and rear shock absorbers with coil springsRoof bar headlights can be equipped with LEDs (sold separately) 300047523

This large-scale R/C assembly kit recreates the Volvo FH16 Globetrotter XL 750 4x2 Tractor. The FH16 series is the flagship of Swedish manufacturer Volvo Trucks, and it was the result of a model change in 2012. The top-class Globetrotter XL offers comfortable interior space and superior aerodynamics, and allows long-distance travel coupled with a high output 750hp engine.1/14 scale R/C model assembly kit. Length: 462mm, width: 193mm, height: 309mm (excluding side mirrors and antenna)The cab is faithfully recreated by precise injection molding, and the distinctive front grille is captured by photo-etched parts.Includes parts to render customized sections such as a roof bar featuring light pods, low bar, and side bars. LEDs (sold separately) are also attachable.Just like the actual vehicle, this model has rear-axle drive 4x2 chassis, and has the motor and transmission at the front of a metal ladder frame.Assembly type 3-speed transmission allows gear changes via separately available 4-channel transmitter.Multi-Function Control Unit (Item 56523: MFC-03, sold separately) offers light, sound, and vibration operation.Interior parts such as modern-design dashboard and seats are included and can be installed together with the Multi-Function Control Unit.Compatible with a wealth of Tractor Truck Option Parts.Includes a 1/14 scale driver figure.Required to complete: 4-Channel Radio system-Tamiya Attack recommended, ESC, 7.2volt battery with compatible charger, and Tamiya TS and bottle paints. 390056375

The TAMIYA truck for tough construction site use! The Mercedes Benz Acros 4151 8x4 is a real heavyweight on the construction site. TAMIYA has modified the proven chassis for this truck: The truck has 4 axles as in the original. The two rear axles are driven by a powerful 540 electric motor. The two front axles are steered by a servo (available separately). The steering angle of the two axles is different, so that a true-to-the-original driving behaviour is achieved.The frame has a subframe to accommodate the newly designed tipping trough. The dump body has been reinforced with a metal subframe and can be controlled via the optional TAMIYA ACU-01 unit (56545).The distinctive design of the new Arocs is as extraordinary as the truck as a whole. For example, a radiator grille in the so-called digger's tooth look has been installed in the look specially developed for construction vehicles, which is intended to convey the message: "Bite through and grab hold". In keeping with the robust appearance, special protective grilles for the lighting system are fitted to the bumper.The 667 mm long and around 4 kg heavy kit model can be used to put together impressive combinations. Under the forward tilting cab you will find the proven and robust TAMIYA truck technology. A new Mighty-Tuned 35T electric motor delivers its power to the two rear axles via a shiftable 3-speed gearbox. A detailed aluminium ladder frame gives the model the necessary stability and flexibility.A towing hitch (e.g. Carson 500907182) can be attached to the rear part of the frame to pull trailers.With the optionally available multi-function unit, almost all sound and light functions of the prototype can be deceptively simulated.This is a 1/14 scale R/C model assembly kit. Length: 667mm, Width: 196mm, height: 268mm.The Arocs 4151 form is recreated in style by the injection molded body, including depictions of cab rails, intake duct and other details. Separate parts recreate side mirrors and visor, etc.Both front axles are steered, via a single servo. Wheels turn realistically at slightly different angles.The Tamiya 4-axle chassis has a tough ladder frame with aluminum side channels and resin cross members.Features a brand new truck bed section comprised of metal subframe for superb durability.Install the separately sold Actuator Set (Item 56545) for realistic truck bed motion.TR mighty-tuned motor (35T) provides twin rear axles with ample power to carry loads in the truck bed.The new battery case is located over the second axle, and allows access even when there are loads in the bed.The roof features a depiction of light pods on the visor, which can be fitted with LEDs for a realistic finish.3-speed transmission can be controlled via a separately sold 4ch R/C transmitter.Metal leaf spring dampers with built-in coil springs provide durable suspension.Use with separately-sold MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic lights and sounds. 300056366

Tamiya is proud to welcome the Scania 770 S 8x4/4 to the 1/14 R/C Tractor Truck Series. The Scania 770 S heavy trailer head is the newest heaviest-class trailer head added to the NEXT GENERATION SCANIA series in 2020. This S series features a V8 turbo engine capable of 770hp. The 8x4/4 means double-axle 4-wheeldrive at the rear and double-axle 4-wheel steering at the front.WARNING!Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model.When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury.Read and follow the instructions supplied with paints and/or cement, if used (not included in kit).Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.Product details:This is a 1/14 scale R/C model assembly kit, unpainted.Length 610mm, width 196mm, height 320mm.The model realistically depicts the Scania 770 S 8x4/4, and a chassis has numerous metal parts.The cab is authentically recreated by precise injection molding, and its rear has detailed renderings of auxiliary machinery tower, fuel tank and air tank to give it a heavyweight look.Just like the actual vehicle, this model has double rear-axle drive and double front-axle steering. It has the motor and transmission at the front of a metal ladder frame.Highly-realistic suspension using metal leaf springs features lift axle – can be moved up and down by hand at the second axle like the actual structure.Assembly type 3-speed transmission allows gear changes via separately available 4-channel transmitter.Multi-Function Control Unit (Item 56523: MFC-03, sold separately) offers light, sound, and vibration operation.Interior parts such as modern-design dashboard and seats are included, and can be installed together with the Multi-Function Control Unit.Includes a 1/14 scale driver figure, and stickers and metal transfers to decorate the body.Application example shows vehicle painted in:TS-42 Light Gun metal silk matt (300085042)Matching LEDs (3mm white) for lamp bracket, optionally available:Above:1x 317175097 (2)3x 307175099 (1)Bottom:2x 317175097 (2) 300056371

This radio control semi-truck assembly kit recreates the Scania 770 S 8x4/4. The body in this version includes a body that is pre-painted in Gun Metal.The Scania 770 S heavy trailer head is the newest heaviest-class trailer head added to the NEXT GENERATION SCANIA series in 2020. The actual S series in which this model faithfully recreates features a V8 turbo engine capable of 770hp. The 8x4/4 means double-axle 4-wheel drive at the rear and double-axle 4-wheel steering at the front.1/14 scale R/C model assembly kit. Length: 610mm, width: 196mm, height: 320mm (excluding side mirrors, and antenna).The model realistically depicts the Scania 770 S 8x4/4, which uses a chassis that features numerous metal parts.The highly realistic cab plus Y, K, M, H and FF parts are molded in gray and pre-painted in Tamiya TS-38 Gun Metal, plus a urethane top coating.The cab authentically recreated by precise injection molding, and its rear has detailed renderings of auxiliary machinery tower, fuel tank and air tank give it a heavyweight look.Just like the actual vehicle, this model has a double rear-axle drive and double front-axle steering. It has the motor and transmission at the front on a metal ladder frame.Highly realistic suspension using metal leaf springs features lift axle. It can be moved up and down by hand at the second axle like the actual mechanism.Assembly type 3-speed transmission allows gear changes via separately sold 4-channel transmitter.Multi-Function Control Unit (Item 56523: MFC-03, sold separately) offers light, sound, and vibration operation.Interior parts such as modern-design dashboard and seats are included and can be installed together with the Multi-Function Control Unit.Includes a 1/14 scale driver figure, cab stickers and metal transfers to decorate the body.Required to complete: 4-channel Tamiya Attack radio, two servos, ESC, 7.2volt battery with compatible charger and Tamiya paints for detail body work. 300056376

With the Volvo FH16, TAMIYA presents the first truck with 4 axles and steerable double axle at the front.The chassis is converted to 8x4 and is the perfect base for the tow truck. The crane body is extremely robust and consists of many metal parts. The crane is driven by an optional ACU unit (order number 300056553). With this unit the crane can be moved up and down.The model is delivered as a kit and already contains numerous add-on parts, such as photoetched parts for the radiator grille, turnbuckles with chains for securing the load and much more.The model has an impressive length of over 70 cm and is driven by the two rear axles. The TAMIYA TR Mighty Tuned truck engine (35T) provides sufficient power.The TAMIYA multifunction unit MFC-03 (300056523) is recommended for the drive, lighting and sound. Due to the enormous length of the model, only the standard MFC LEDs have to be replaced here by the special ones with longer cables (300056549 to 300056551).The FH16 is the first TAMIYA truck model in which the driver's cab is bolted tight. This allows the MFC to be installed behind the seats and the interior is fully visible.Technical details:- Kit model in scale 1:14- dim.: length 750 mm, width 195 mm, height 300 mm- prototypical ABS body replica of the Volvo FH16with numerous tuning parts, such as photoetched parts in the front grilland cabin interior- Front double axle with steerable axles via servo- The rear towing crane is realistically replicated andconsists of many metal parts. The drive is provided by theseparately available ACU (300056553) is required.- The metal frame is reinforced.- The power transmission from the front mounted engine to theboth rear axles is effected via a metal cardan shaft.- 2 differentials on the rear axles for tight corners- Detailed metal leaf springs and friction dampers- Including TR mighty-tuned motor (35T) for a perfectPower delivery to the two driven rear axles- 3-speed manual transmission can be controlled via optional 4-channelremote control can be activated.- Firmly bolted driver's cab- Very detailed interioir. The multifunctional unit (not includedcan be installed behind the seats.- Recommended accessories: MFC-03 Multifunction Unit (300056523for the driving, light and sound functions.- Note: Optional accessories are LED's with longer cable forthis model, which is indicated by the standard LED's in the MFhave to be replaced. Order numbers: 300056549-56551)Required accessories:- At least 4 channel remote control - recommended Carson Reflex Stick500501006 (6-channel), 500501003 (14-channel) or50050100 (14-channel LCD display)- 7.2V NiMH battery pack, charger- TAMIYA TS paint for painting- Steering servo + servo for manual gearbox- Travel controller or TAMIYA multifunction unit MFC-03300056523 for the driving, light and sound functions- optionally the ACU unit (300056553) for the drive of theCrane armWARNINGS:The instructions should be read and understood completely together with an adult. Keep away from small children. Children must not put any parts or packaging material in their mouths. The model may have some sharp corners. Pay attention to this when handling the model. Read the instructions supplied with the RC unit and keep them for future reference.If difficulties occur during assembly, ask an adult to supervise the work or a model builder with RC experience or a dealer.Use tools only for their intended purpose. There is a risk of injury if used incorrectly.If you use paints and/or adhesives (not included in the kit), observe and follow the instructions enclosed with the kit.Keep the kit away from small children. Prevent children from putting any components in their mouth or pulling plastic bags over their head. 300056362

This R/C assembly kit depicting the Volvo FH16 Tow Truck is a special limited-edition release that includes the ABS body pre-painted in TS-17 Gloss Aluminum, with a urethane clear top coating for a high-quality finish.About the Volvo FH16 Tow TruckVolvo is a renowned actor in the global commercial vehicle market, with one of their flagship brands being the FH Series that underwent a full model change in 2012. This R/C model assembly kit recreates the 750hp engine FH16 Globetrotter 750 8x4 tow truck from that range. The model has a realistic cab and body, the former featuring a photo-etched front grille and interior details, the latter opening doors. The trucks fascinating towing mechanism uses metal parts and winch boom, under lift and outriggers are movable manually. The front mounted TR Mighty Tuned motor (35T) provides ample power to the two rear axles, via a three-speed transmission. Gear changes are also possible via transmitter controls, and the model can tow subjects such as 1/14 scale R/C tractor trucks.Optional Extras for Ultra RealismItem 56553 Electric Actuator Set for 1/14 Scale R/C Tow TruckThis separately sold set allows raising of the winch boom and under lift via R/C controls. It uses a precision geared motor and spindle cylinder, plus the ACU-02 unit, and features a toggle switch for manual control.Item 56523 Tractor Truck Multi-Function Control Unit MFC-03Tamiya Multi-Function Control Units (sold separately) offer light, sound, and vibration operation to go with your R/C truck experience. Engine sounds have been digitally recorded from actual trucks, and together with air horn, gear shifting, and various other realistic sounds, give you the feeling that you are driving the real thing! Headlights, brake lights, fog lamp, hazard lights and turn signal operations are also at your fingertips.1/14 scale R/C model assembly kit. Length: 732mm, width: 199mm, height: 309mm.The highly realistic cab, plus H, M, DD, HH, LL, MM, and NN parts are molded in gray and pre-painted in TS-17 Gloss Aluminum, with a urethane top coating.This model’s front axles feature twin steering system.Includes metal components for excellent durability.Install the new separately available Actuator Set (Item 56553) to control its actions via your R/C transmitter.Ladder frame has aluminum side channels and resin cross members. Power from the front motor is delivered to the two rear axles via a propeller shaft.A built-in differential gear on each axle enables smooth cornering.Highly realistic suspension uses metal leaf springs and friction dampers.The model enjoys easy driving thanks to the float-mounted die-cast front and reinforced resin rear axles.Three-speed transmission allows shifting via the R/C transmitter (Note: only one gear is usable when towing).Headlights and taillights can be lit up with separately sold LEDs, and the model is compatible with Item 56523 Tractor Truck Multi-Function Control Unit "Euro-Style" (MFC-03).Compatible TROP truck option parts: 56523, 56531, 56538, 56548, 56549, 56550, 56551, 56553.Required to complete: Tamiya 4-Channel R/C system, ESC, 7.2volt battery and compatible charger, and Tamiya acrylic paints for detailed parts. 300047528