- AIRPLANES
- DRONES & HELICOPTERS
- CARS & BOATS
-
RC ELECTRONICS
- TRANSMITTERS
- Servos & Accessories
- SIMULATORS
- SOUND & LIGHTING
-
CABLES & CONNECTORS
- Servo Connection Cables
- Servo Cables per Meter
- V-(Y)-Cables for Servos
- Extension Cables for Servos
- Connectors for Batteries & ESCs
- Connectors for Servos & Receivers
- Charging cables
- Adaptor cables
- Accessories for Servo Cables and Connectors
- Shrinkage hoses
- Switch cables
- Silicon High Current Cables
- Receiver Connection Cables
-
Accessories for High Current Cables & Connectors
- FPV EQUIPMENT
- POWER SUPPLY & BUS SYSTEM
- CHARGERS & POWER SUPPLIES
- BATTERIES
- SUPPLIES & MISC
- NEW
- SALE
- RC Blog
- BRANDS
Filter
–
Robbe Modellsport Connector cover XT-60 connector 5 pieces
€4.99*
Product no.:
9795913
Manufacturer no.:
46341
46341
Robbe Modellsport Solder board 6-pin MPX high current connector System 5 pieces
€5.99*
Product no.:
9788416
Manufacturer no.:
46307
46307
Robbe Modellsport Solder board 6-pin MPX high current connector System with plug (contact = plug) 5 pieces
€19.99*
Product no.:
9788417
Manufacturer no.:
46308
46308
HACKER Mounting frame double for XT-90 plug
€7.90*
Product no.:
9785316
Manufacturer no.:
A85061
A85061
HACKER Mounting frame for XT90 sockets
€9.95*
Product no.:
9780574
Manufacturer no.:
A85100
Plastic mounting frame for XT90 sockets. The mounting frames can be fixed in the model with the screws supplied. A85100
HACKER Mounting frame for XT90 connector
€9.95*
Product no.:
9780572
Manufacturer no.:
A85089
Plastic mounting frame for XT90 connectors. The mounting frames can be fixed in the model with the screws supplied. A85089
HACKER Mounting frame for XT60 sockets
€6.95*
Product no.:
9780569
Manufacturer no.:
A85084
Plastic mounting frame for XT60 or XT60+ sockets. The mounting frames can be fixed in the model with the screws supplied. A85084
HACKER Mounting frame for XT60 connector
€6.95*
Product no.:
9780568
Manufacturer no.:
A85083
Plastic mounting frame for XT60 or XT60+ connectors. The mounting frames can be fixed in the model with the screws supplied. A85083
-40%
HACKER Mounting frame for XT30 sockets
€4.19*
€6.95*
(39.71% saved)
Product no.:
9780566
Manufacturer no.:
A85103
Plastic mounting frame for XT30 connectors. The mounting frames can be fixed in the model with the screws supplied. A85103
-10%
MODELLBAU LINDINGER SOLDERING CONNECTOR SET YELLOW 50PCS.
€12.99*
€14.45*
(10.1% saved)
Product no.:
9775517
Manufacturer no.:
C5536
Our soldered connectors are - simply put - a piece of heat shrinkable tubing in which a soldering sleeve or solder ring is located.Simply plug in the cables and use a hot air blower, e.g. our hot air blower # C4632, to melt the solder ring until glue comes out of the ends.The simple, fast solution for tensile cable connections - Available in 4 different dimensions.Technical dataShrinkage rate 3:1Continuous operating temperature IEC 216 -40°C to +110°CTensile strength 11.5 mPaElongation at break 250%Shrink temperature +110°C to 200°C C5536
-10%
MODELLBAU LINDINGER SOLDERING CONNECTOR SET BLUE 50PCS.
€12.49*
€13.95*
(10.47% saved)
Product no.:
9775516
Manufacturer no.:
C5528
Our soldered connectors are - simply put - a piece of heat shrinkable tubing in which a soldering sleeve or solder ring is located.Simply plug in the cables and use a hot air blower, e.g. our hot air blower # C4632, to melt the solder ring until glue comes out of the ends.The simple, fast solution for tensile cable connections - Available in 4 different dimensions.Technical data- Shrinkage rate 3:1- Continuous operating temperature IEC 216 -40°C to +110°C- Tensile strength 11.5 mPa- Elongation at break 250%- Shrink temperature +110°C to 200°C C5528
-11%
MODELLBAU LINDINGER SOLDER CONNECTOR SET RED 50PCS.
€11.99*
€13.45*
(10.86% saved)
Product no.:
9775515
Manufacturer no.:
C5532
Our soldered connectors are - simply put - a piece of heat shrinkable tubing in which a soldering sleeve or solder ring is located.Simply plug in the cables and use a hot air blower, e.g. our hot air blower # C4632, to melt the solder ring until glue comes out of the ends.The simple, fast solution for tensile cable connections - Available in 4 different dimensions.Technical data- Shrinkage rate 3:1- Continuous operating temperature IEC 216 -40°C to +110°C- Tensile strength 11.5 mPa- Elongation at break 250%- Shrink temperature +110°C to 200°C C5532
-14%
MODELLBAU LINDINGER SOLDERING CONNECTOR SET 110 PIECES
€21.49*
€24.95*
(13.87% saved)
Product no.:
9775513
Manufacturer no.:
C5530
Soldering and shrinking without a soldering iron in one operation!Our soldering connectors are - simply put - a piece of shrink tubing containing a soldering sleeve or soldering ring.Simply plug in the cables and use a hot air blower, e.g. our hot air blower # C4632, to melt the solder ring until glue comes out of the ends.The simple, quick solution for tensile cable connections - Available in 4 different dimensions.Technical data- Shrinkage rate 3:1- Continuous operating temperature IEC 216 -40°C to +110°C- Tensile strength 11.5 mPa- Elongation at break 250%- Shrink temperature +110°C to 200°C C5530
-7%
MODELLBAU LINDINGER SOLDER CONNECTOR SET WHITE 50PCS
€11.99*
€12.95*
(7.41% saved)
Product no.:
9775514
Manufacturer no.:
C5531
Soldering and shrinking without a soldering iron in one operation!Our soldering connectors are - simply put - a piece of shrink tubing containing a soldering sleeve or soldering ring.Simply plug in the cables and use a hot air blower, e.g. our hot air blower # C4632, to melt the solder ring until glue comes out of the ends.The simple, quick solution for tensile cable connections - Available in 4 different dimensions.Technical data- Shrinkage rate 3:1- Continuous operating temperature IEC 216 -40°C to +110°C- Tensile strength 11.5 mPa- Elongation at break 250%- Shrink temperature +110°C to 200°C C5531
EMCOTEC MPX BOARD 90° 6-POLE 4 PIECES
€9.10*
Product no.:
9741462
Manufacturer no.:
A86012
MPX boards 6-pin e.g. suitable for assembling MPX plugs and sockets. A86012
MULTIPLEX PLUG FUSE M6 5PCS. FOR HIGH CURRENT CONNECTORS
€11.99*
Product no.:
9723452
Manufacturer no.:
725110
MPX housing with safety clips for attaching MPX plugs. E.g. suitable for battery connections. 725110
MULTIPLEX PLUG HOLDER M6 5PCS. FOR HIGH CURRENT CONNECTORS
€11.99*
Product no.:
9723451
Manufacturer no.:
725100
725100
MODELLBAU LINDINGER REVERSE POLARITY PROTECTION GOLD CONTACT 4MM 2 PCS.
€1.99*
Product no.:
9721618
Manufacturer no.:
095660
Reverse polarity protection suitable for many standard 4 mm gold contact plug systems. If necessary, check the compatibility! 095660
EMCOTEC MPX PLATINE 4-PINS 5PCS.
€6.99*
Product no.:
9718948
Manufacturer no.:
A86010-4-PINS
MPX board Adapter board , which enables the direct soldering of the MPX plugs/sockets. The individual cables (e.g. servo cables) can then simply be soldered onto the large solder pads. A suitable heat-shrink tubing (item no. A84025) is sufficient for insulation. Especially suitable for the production of the servo supply for surface connectors. In combination with the MPX housings included in the MPX connector sets (article no. A85020 or A85021), there is even no need to glue them to the housings, as the circuit board fixes the high-current connector firmly in the housing by soldering. Suitable for the MPX connectors, this board is 1.6mm thick. A86010-4-PINS
EMCOTEC MPX PLATINE 6-PINS 5PCS.
€6.99*
Product no.:
9718949
Manufacturer no.:
A86010/832
MPX board Adapter board , which enables the direct soldering of the MPX plugs/sockets. The individual cables (e.g. servo cables) can then simply be soldered onto the large solder pads. A suitable heat-shrink tubing (item no. A84025) is sufficient for insulation. Especially suitable for the production of the servo supply for surface connectors. In combination with the MPX housings included in the MPX connector sets (article no. A85020 or A85021), there is even no need to glue them to the housings, as the circuit board fixes the high-current connector firmly in the housing by soldering. Suitable for the MPX connectors, this board is 1.6mm thick. A86010/832
EMCOTEC EMC BOARD 6-PINS 5PCS. FOR HIGH CURRENT CONNECTORS
€6.99*
Product no.:
9711888
Manufacturer no.:
A86008/830
Adapter board, which allows the direct soldering of EMC plugs/sockets (MPX-compatible with double contacts). The individual cables (e.g. servo cables) can then simply be soldered onto the large solder pads. Especially suitable for the production of the servo supply for surface connectors. In combination with the EMC housings included in the EMC connector sets (article no. A85022 or A85023), there is even no need to glue them to the housings, as the circuit board fixes the high-current plug firmly in the housing by soldering. The two middle pins (usually plus and minus) are merged on the 4-pin version on the board. The middle pins of the 6-pin variant are not merged. This means that a total of 4 (4-pin variant) or 6 (6-pin variant) electrically isolated contacts are routed to the 8 solder pads. This allows easy soldering of servo cables on the top and bottom side of the board. Suitable for EMC connectors, this board is 1.2mm thick (also suitable for original MPX). A86008/830
EMCOTEC SOLDERING BOARDS 8-PIN 5PCS. SUITABLE FOR EMCOTEC A85305 / A85310
€5.70*
Product no.:
9711886
Manufacturer no.:
A85315
Soldering boards 8-pole e.g. suitable for assembling plugs and sockets (article no. 9710353 or 9710356, not included in delivery). A85315
EMCOTEC MULTIPLEX SAFETY CLIPS SCREWABLE 5PCS.
€11.40*
Product no.:
9705137
Manufacturer no.:
A86013
Features:- Locking clip for the MPX high current connector system - The housing is simply attached to a bulkhead or similar with small screws - An optionally mountable bevelled mounting plate makes it easier to remove the connector - The perfect protection against vibrations! A86013
-7%
MODELLBAU LINDINGER CABLE HOLDER CLIP LARGE 11MM 5PCS.
€1.99*
€2.15*
(7.44% saved)
Product no.:
94367
Manufacturer no.:
X7062-11
- L/W/H: 25.4/15.5/- mm- Cable holder-Ø-W/H: 11.6/7.8 mm Material: Nylon 66Colour: naturalTemperature range: -30°C - 85°CAdhesive film: -30°C - 104°Cflammable according to UL94V-2 X7062-11
MODELLBAU LINDINGER CABLE HOLDER 13X13MM 5PCS.
€1.99*
Product no.:
94368
Manufacturer no.:
X7063-13
- L/B/H: 13/13/3.2 mm Material: Nylon 66Colour: naturalTemperature range: -30°C - 85°CAdhesive film: -30°C - 104°Cflammable according to UL94V-2 X7063-13
MODELLBAU LINDINGER U-CLIP CABLE HOLDER LARGE 9MM 5PCS.
€3.99*
Product no.:
94365
Manufacturer no.:
X7061-9
- L/W/H: 19.1/19.1/15.1 mm- Cable holder-Ø: 9,5 mm - Material: PVC- Colour: grey- Temperature range: 0°C - 50°C- Adhesive film: -40°C - 90°C- flammable according to UL94V-2 X7061-9
MODELLBAU LINDINGER PLUG HOLDER FOR HIGH CURRENT MULTIPLEX CONNECTOR SYSTEM
€1.99*
Product no.:
63964
Manufacturer no.:
9002
Mit Hilfe dieser Steckerplatine bringen Sie auf einfache Weise System in Ihre Modelle. Ideal für Steckverbindungen zu Flächenservos, z.B. im F3J oder F3B Segler. Und so gehts: Multiplex Hochstromstecker oder -buchse mit der Steckerplatine verlöten, Kabel anlöten und das Ganze nun komfortabel an einer geeigneten Stelle mit zwei Schrauben befestigen. 9002
MODELLBAU LINDINGER MOUNTING FRAME HIGH-CURRENT PLUG LONG 10PCS MPX
€9.99*
Product no.:
54856
Manufacturer no.:
50048
Mounting frame especially for the green or red high current plugs, e.g. for charging sockets. The cover frame is available as an option. Simply screw into the fuselage, insert the high current plug and secure with a drop of superglue. If it is not intended as a servo connection, use the short version.Height 11 mm 50048
MODELLBAU LINDINGER INSTALLATION FRAME HIGH CURRENT PLUG SHORT 10PCS
€9.99*
Product no.:
54857
Manufacturer no.:
50047
Mounting frame for the green or red high current plugs, e.g. for the wing connection. Simply screw into the surface and the fuselage, insert the multiplex plug and secure with a drop of superglue.Height 6 mm 50047
POWERBOX SYSTEMS FUSE CLIPS HIGH CURRENT PLUG 6PCS. MPX
€4.40*
Product no.:
51890
Manufacturer no.:
9010
Der Sicherungsklipp für die Multiplex-Hochstromstecker lässt sich auf alle Hochstromstecker montieren. Den Sicherungsklipp einfach über den Hochstromstromstecker schieben, mit Sekundenkleber sichern, fertig! 9010