Filter
–
UNILIGHT Modul E8 Plus
€74.90*
Product no.:
9792120
Manufacturer no.:
MODUL-E8
The E8 control module is the successor to the well-known 8-channel PRO control from uniLIGHT.at. The hardware and software have undergone a complete facelift and some features have been added, most notably the support of the uniLIGHT PLUS functionality in connection with the uniLIGHT DESK.The 8-channel module also offers universal application options for all lighting tasks in functional model construction. Up to eight power or light circuits can be implemented using two different operating voltages. Up to 6 light sequences can be dynamically selected, 5 of which are completely freely programmable. These can then be selected via the servo travel from -100% to +100%. The speed of the light effect can also be adjusted on the module according to personal taste and the scale of the model.The software interface was changed to the 3-pin data interface for the uniLIGHT MODUL-PLUS programming cable. In addition to more stable communication, the status of the data connection can also be displayed directly on the cable. Other known and new features of the E8 aredynamic programming with 2 to 6 light schemesautomatic adjustment of the servo travelConnector strips suitable for unLIGHT standard lightsgalvanic isolation between RC and lightGalvanically isolated 2-circuit operation of the lights with different batteries/voltages possibleSturdy, bolted housing and mounting base includedCapability up to 2x7 amps continuous current, up to 30V (depending on lights used)any light pattern with 16bit depth can be programmed with a slide'n clicktwo servo outputs for folding headlights, flaps, undercarriage, flaps,...Servo outputs can be programmed directly or with adjustable smooth runningfreely adjustable speed of rotation in each light schemeany ramp functions can be set separately for each channel in each lighting schemeIndividual idle pauses for each light channel and in each scheme allow arbitrary pauses and highly asynchronous behaviorTechnical Data:Control side receiver 4.8-9.6VOnly ca. 18g (without cable)Dimension: 50x60x8mmLight signals 8 Channels with 3A to 30V, pulse load up to 8ATotal load up to 2x7AGalvanically isolated circuitsOperation possible without RC signalSmooth shifting programmableFreely programmable effects sequences2 programmable servo outputs for landing lights, undercarriage or fireworksuo to 6 light sequences Freely available Windows configuration softwareAssistance function for production of standard light signals MODUL-E8
-24%
MUD-DART RC MudLED Modellbeleuchtung Ausführung Pins angelötet
€34.99*
€45.99*
(23.92% saved)
Product no.:
9788319
Manufacturer no.:
MudLED-pins soldered
MudLED lets you easily configure any kind of LED effect you want – from blindingly simple to blindingly complicated – using your phone, tablet, or any device with wifi.DescriptionHave you ever wanted to have your own custom lighting effects, but don’t know how to code?MudLED Lets you use any WiFi enabled device (phone, tablet, laptop etc) to configure your own LED effects in an intuitive and simple way.This is the second version of the MudLED, which is uses a custom designed circuit board that’s easy to use and incorporates feedback we got on the previous version.Control up to 1000 LEDsEasy to use web-browser based interfaceAvailable with servo pins or solder pads4 separate LED strip outputsSmall and light – about 25x40mm and 5gOver-the-air updates for bug fixes and new features MudLED-pins soldered
UNILIGHT MODULE 4-CHANNEL BLACK.4
€39.90*
Product no.:
9739774
Manufacturer no.:
MODUL-B4
4-Channel state of the art light controller: BLACK.4Our new control unit Black.4 is the new, slim reference desing for most light systems. It delivers fast and brillinat results for all ranges of modelling and was massively improved in all areas of operation. With the four functions: strobe, beacon/ACL, navigation and spotlights - all controllable over one servo channel - it is perfectly usable for nearly each aircraft.New in Black SeriesDynamic nicer, faster and sharper defined light effectsVariety more light patterns preprogrammedDimensions reduced size and weight, polarity correct output socketsSafety basic shortcut protection, cut off and automatic restorePower up to 5 ampere per channel, 8 ampere combinedBattery deep discharge protection for connected LiposMaster-Slave activation by the receiver powerScale soft transition as special function selectableSport navigation with strobe function for many sport applicationsFuture new hardware platform allows future updatesSpecial FunctionSlow Signals a soft transition simulates a soft glow-on and glow-off like an old glow bulb or simulates a rotating beacon effect of slow blinking functions.Fast Signals during strobe sequences a basic level of around 20% power is given to the light. With these function a strong strobe light can be operated as navigation light AND at the same time be a strobe signal. Perfectly usable on sport models: one light, two functionsTechnical Datareceiver side 4.8-9.6Vweight ~8g, without wiredimension 50x35x6mmload per channel 5A to 16V (>6A peak)total load up to 8Agalvanically isolated circuitsoperation without RC possible15+1 classic effects with variable speed15+1 modern effects with variable speed15+1 special effects with variable speedsoft transition programmablesport-nav mode programmableshort circuit protectiondeep discharge protectionreverse polarity protectionsimple servo output for dropouts, switches or valvesincluding quick-snap mounting brackets MODUL-B4
UNILIGHT MODULE 1-CHANNEL BLACK.1
€24.90*
Product no.:
9718141
Manufacturer no.:
MODUL-B1
One-Channel state of the art light controller: BLACK-SeriesThe BLACK.1 controller is a nice solution for simplest applications. It’s made for single functional jobs like navigation-, blink-, strobe/ACL or spotlights in easy models. Usually without the need of a receiver channel - but this is optional possible. The controller is directly connected to a 2S/3S Lipo. In programming mode it’s possible to select a free light schema, which is used automatically in future. If plugged to a receiver, the light schema can be selected by the transmitter. Simplest solution for position flashlights on gliders and sport models, navigation lights on multicopters, spotlights for horizon signals on jets,... The B.1 controller can also be used in combination with existing uniLIGHT controllers as power stage for spotlights, channel extension, special effects...New in Black Series:Dynamic nicer, faster and sharper defined light effectsDimensions reduced size and weight, optimized for 2-channel applicationsSafety basic shortcut protection, cut off and automatic restoreBattery deep discharge protection for connected LiposTechnical Data:receiver side 4.8-9.6Vweight ~1.5g, without wiredimension 45x14x6mm6A to 16V (10A peak)operation without RC possible11 effects with variable speedshort circuit protectiondeep discharge protectiondelivery with mounting clips MODUL-B1
-12%
UNILIGHT MODULE 2-CHANNEL BLACK.2
€29.90*
€33.90*
(11.8% saved)
Product no.:
9717981
Manufacturer no.:
MODUL-B2+
Our 2-channel module Black.2+ is the small entry-level version of the uniLIGHT system, now with uniLIGHTPLUS. It is easy to use and provides fast results for all model areas. The main application is the use of an ACL or BEACON light and switchable headlights. In the classic operating mode, fixed light patterns are stored and can be called up as usual via the servo travel. However, freely programmable light patterns can also be set using the MODUL-PLUS programming cable and the uniLIGHT.DESK.Innovations of the PLUS seriesDynamics More beautiful, faster and more defined lighting effectsSoftware compatible with uniLIGHT.DESKConfiguration freely definable light scheme and numerous settingsSecurity Basic short-circuit protection of the outputs, shutdown and automatic reactivationMaster-slave principle No switch required in the load circuit, is only activated by the remote controlSpecial functions soft switching transition and navigation + flash special function for many sports tasks MODUL-B2+
UNILIGHT AB.2 PLUS AFTERBURNER
€39.90*
Product no.:
9786610
Manufacturer no.:
MODUL-AB2PLUS
The afterburner control BLACK.AB2 supports up to two extremely powerful afterburner rings, suitable for 2-jet aircraft or as a double ring for maximum light output. In addition to the typical "flicker" effect, the controller also can do gentle glow functions now. As with all uniLIGHT controllers, it is controlled via the servo travel, or via parts of it. Now, however, a switching point operation is possible, in which the connection parallel to the gas channel becomes possible.With the PLUS function you can now conveniently select all settings and configurations yourself via our software (on our homepage in the DOWNLOAD section).All you need is our MODUL-PLUS (programming-cable) and you're ready to go.Operating modes:Random flickering effect or gentle glow effectDirectly dependent on the servo input or in parallel operation with switching pointOptions:Fast or delayed response to the signal inputSubdued motion effect with soft flickeringPreheating function below the main functionBasic level underlaid the flicker signalTechnical Data:receiver side: 3,6-9,6Vweight: 9gdimension: 50x35x6mmload per channel: 8A, to 16Vtotal load up: 12Agalvanically isolated circuitsdeep discharge protectionservo outputincluding quick-snap mounting brackets MODUL-AB2PLUS
OPTOTRONIX AURORA EVO2 ICU NIGHT SHOW RGB
€63.90*
Product no.:
9723748
Manufacturer no.:
OPT2002
Optotronix Aurora LCU EVO2 NightShow RGB! For the perfect show you can upgrade your effect model with up to 30m RGB LED bands. The Aurora NightShow RGB creates various lighting effects (Color Fading, Color Jumping, Permanent Color, Color Strobo,...) which can be controlled from the transmitter and the speed is infinitely variable. A special flight show mode makes it easy to jump between desired effects during the flight. The Aurora NightShow RGB can now be operated with up to 13 Volts (3S LiPo/LiIon) and offers concentrated light output in the smallest of spaces with an unbeaten 16x48 millimetres and a weight of 11 grams. OPT2002
OPTOTRONIX AURORA LCU EVO2
€63.90*
Product no.:
9708055
Manufacturer no.:
OPT2000
Versatile new version of 6-channel lighting electronics with numerous lighting functions and dimming effects.The Aurora LCU EVO2 now offers even more true to original flash sequences (24), beacons (4) and afterburner simulations (10) with a doubled output power of 3A per output. New is the soft-start dimming effect (optional slow dimming up of the output instead of hard switching on) and a seaplane landing light sequence: In seaplanes, the landing lights flash alternately during landing approach.Furthermore, it is now possible to simulate MG, MK and Gatling fires with the multi-gun effect.The intelligent firmware stores the desired activation point for each output and adapts completely to the transmitter (e.g. reverse / normal operation). This also makes it easy to learn how to activate any light functions by setting landing flaps or extending the landing gear.The Aurora LCU EVO2 can be operated with up to 13V (3S LiPo). This also allows the connection of LED lights designed for 12V (LED strips, HV LEDs, etc....). OPT2000
MICROSENS LIGHTING MODULE
€59.00*
Product no.:
85039
Manufacturer no.:
NL1W
Navigationslicht, Landescheinwerfer (wird über Servokanal betätigt). Für max. 8 1Watt-LEDs: 4x Blitz, 2x Landescheinwerfer, 2x PositionslichtFeatures:Helligkeitseinstellung über Taster programmierbarEmpfohlener Akku: 2S-LiPo, ca. 1000mAh, Anschluss MPX-HochstromsteckerMit LiPo-Abschaltung bei 6,0VAbmessungen, Gewicht: 41x32mm, 17g NL1W
POWERBOX SYSTEMS LIGHTBOX SR LIGHT CONTROL
€59.00*
Product no.:
9712428
Manufacturer no.:
6700
More and more pilots not only want to build their model to 100% scale, but also functionally. Of course, this includes a lighting control system that is in no way inferior to the original. The newly developed LightBox SR from PowerBox Systems can control different light sequences for your model using the freely available Terminal PC interface. The PowerBox USB interface or a USB adapter from other manufacturers such as Multiplex or Jeti is required. The user interface is very easy to operate and gives the user all options to individually adjust the lighting system in the model. 6700
UNILIGHT MODULE 8-CHANNEL PRO
€74.90*
Product no.:
9708878
Manufacturer no.:
MODUL-8-300-1
The lighting system for all tasks!The 8-channel module offers universal application possibilities for all lighting tasks in functional model making. Up to eight current or light circuits can be implemented and two different operating voltages can be used. Using a Windows PC you can program the module with our software via USB. Two preset and 5 freely programmable light sequences can be stored, which can then be selected via the servo path from -100% to +100%. In addition, the speed of the light effect can be freely adjusted on the module according to personal taste and scale of the model.Technical Data Control side receiver 4.8-9.6Vonly approx. 18g (without cable)Dimension: 50x60x8mmLight signals 8 channels with 3A to 30V, pulse load up to 5ATotal load up to 2x5Agalvanically isolated circuitsOperation also possible without RC signalsoft switching transition programmablefreely programmable effect sequences2 programmable servo outputs Servo output for landing lights, landing gear or fireworks2 fixed and 5 freely programmable light sequences to choose from, all with variable speedFree Windows configuration softwareAssistance function for generating standard light signalsSaving and exchanging profiles MODUL-8-300-1