ACT DPS-25 SOFT BATTERY (XT60) WITH ELECTRON SAFETY SWITCH
Product number:
9777506
Manufacturer number:
01008011
GTIN/EAN:
805627060310
Description "ACT DPS-25 SOFT BATTERY (XT60) WITH ELECTRON SAFETY SWITCH"
Description
The DPS-25 is used to switch on a receiving system safely and without wear and tear, to supply it with high current for best servo performance and at the same time increase safety by using 2 separate receiver batteries for battery redundancy. Of course the DPS-25 can also be used with only one battery as a pure receiver switch.
In order to be able to use the optimum performance of strong and fast servos at all, a power supply is required which leads the necessary high currents directly to the servo sockets on the receiver without loss.
In addition, the power supply must still function even if one battery fails. The DPS-25 provides these safety functions, while at the same time minimising components that are susceptible to faults. This results in optimum protection against vibration and contact problems. The switching output stages used ensure maximum and loss-free current flow, the internal resistance is considerably lower than the contact resistance of mechanical switches.
Due to the large cable cross-sections in the supply lines to the receiver, the maximum current is conducted directly to the servo sockets, and the servos can thus develop their potential power and performance in the first place.
The DPS-25 has the proven T-connector system as battery connection, and 3 original Futaba plug cables (contact socket) are fitted on the receiver side. These special contacts allow exclusive continuous currents of up to 6A, the highest value for this connector system. The cable cross section is 0.5mm. The negative conductor is made of silver. This allows the full power of the battery backer or the battery used to be transferred directly to the servo cables.
NOTE: Input voltage = output voltage, no voltage reduction, the servos are supplied directly with the battery voltage!
Technical data
Input voltage 4.5 - 8.4 V
Total power: up to 300 W
Weight: 25 g
Dimensions: 46x17x11 mm
Features
The DPS-25 is used to switch on a receiving system safely and without wear and tear, to supply it with high current for best servo performance and at the same time increase safety by using 2 separate receiver batteries for battery redundancy. Of course the DPS-25 can also be used with only one battery as a pure receiver switch.
In order to be able to use the optimum performance of strong and fast servos at all, a power supply is required which leads the necessary high currents directly to the servo sockets on the receiver without loss.
In addition, the power supply must still function even if one battery fails. The DPS-25 provides these safety functions, while at the same time minimising components that are susceptible to faults. This results in optimum protection against vibration and contact problems. The switching output stages used ensure maximum and loss-free current flow, the internal resistance is considerably lower than the contact resistance of mechanical switches.
Due to the large cable cross-sections in the supply lines to the receiver, the maximum current is conducted directly to the servo sockets, and the servos can thus develop their potential power and performance in the first place.
The DPS-25 has the proven T-connector system as battery connection, and 3 original Futaba plug cables (contact socket) are fitted on the receiver side. These special contacts allow exclusive continuous currents of up to 6A, the highest value for this connector system. The cable cross section is 0.5mm. The negative conductor is made of silver. This allows the full power of the battery backer or the battery used to be transferred directly to the servo cables.
NOTE: Input voltage = output voltage, no voltage reduction, the servos are supplied directly with the battery voltage!
Technical data
Input voltage 4.5 - 8.4 V
Total power: up to 300 W
Weight: 25 g
Dimensions: 46x17x11 mm
Features
- Battery backer with electronic safety buttons
- XT60 connector system
- High current power FETs for 25A continuous current (40A short) with lowest internal resistance in the switch.
- LED display for each battery
- 0.5 sec safe interruption bridging against switch bounce and vibration
- High current supply to the receivers with 3x Futaba with quality gold contacts
- Absolutely vibration-proof through SMD technology
- No mechanical wear of any kind
- Ideal for all applications with strong digital and power servos
- Power supply of the servos from 1 or 2 high current batteries
- Voltage drop max. 0.2V at 20A
- Automatic switchover in case of battery failure
- Only passive, fail-safe electronic components, no software