ACT PS-25 electronic safety swtich (xt60)
Product number:
9777507
Manufacturer number:
01008012
GTIN/EAN:
805627060327
Description "ACT PS-25 electronic safety swtich (xt60)"
Description
The Power Switch 25 is used to switch on a receiving system safely and without wear and tear, and to supply it with high current for best servo performance. In order to be able to use the optimal performance of strong and fast servos at all, a power supply is required which leads the necessary high currents without loss directly to the servo sockets on the receiver. These safety functions are provided by the PS-25, while at the same time minimizing components that are susceptible to faults. This results in optimum protection against vibration and contact problems.
The switching output stages used ensure maximum and loss-free current flow, the internal resistance is considerably lower than the contact resistance of mechanical switches. The high cable cross-sections in the supply lines to the receiver mean that the maximum current is conducted directly to the servo sockets, allowing the servos to develop their potential power and performance in the first place.
The PS-25 has the proven XT60 plug system as the battery connection, 2 original Futaba plug cables (contact socket) are fitted on the receiver side. These special contacts allow exclusive continuous currents of up to 6A, the highest value for this connector system. The cable cross section is 0.5mm. The negative conductor is made of silver. This allows the full power of the battery backer or the battery used to be transferred directly to the servo cables.
The electronic high current switch eliminates all wear and vibration problems of mechanical switches. To switch the system on, simply press the ON button, which then only switches the electronic circuitry (and thus the receiver and servos) ON; after this the button is no longer effective. The operating current always flows through the power electronics, not through the actuating buttons or switches.
NOTE: Input voltage = output voltage, no voltage reduction, the servos are supplied directly with the battery voltage!
Technical data
Features
The Power Switch 25 is used to switch on a receiving system safely and without wear and tear, and to supply it with high current for best servo performance. In order to be able to use the optimal performance of strong and fast servos at all, a power supply is required which leads the necessary high currents without loss directly to the servo sockets on the receiver. These safety functions are provided by the PS-25, while at the same time minimizing components that are susceptible to faults. This results in optimum protection against vibration and contact problems.
The switching output stages used ensure maximum and loss-free current flow, the internal resistance is considerably lower than the contact resistance of mechanical switches. The high cable cross-sections in the supply lines to the receiver mean that the maximum current is conducted directly to the servo sockets, allowing the servos to develop their potential power and performance in the first place.
The PS-25 has the proven XT60 plug system as the battery connection, 2 original Futaba plug cables (contact socket) are fitted on the receiver side. These special contacts allow exclusive continuous currents of up to 6A, the highest value for this connector system. The cable cross section is 0.5mm. The negative conductor is made of silver. This allows the full power of the battery backer or the battery used to be transferred directly to the servo cables.
The electronic high current switch eliminates all wear and vibration problems of mechanical switches. To switch the system on, simply press the ON button, which then only switches the electronic circuitry (and thus the receiver and servos) ON; after this the button is no longer effective. The operating current always flows through the power electronics, not through the actuating buttons or switches.
NOTE: Input voltage = output voltage, no voltage reduction, the servos are supplied directly with the battery voltage!
Technical data
- Input voltage 4.5 - 8.4 V
- Total power: up to 250 W
- Weight: 20 g
- Dimensions: 46x17x11 mm
Features
- Electronic safety switch with safety buttons
- XT60 connector system
- High current power FETs for 25A continuous current (40A short) with lowest internal resistance in the switch.
- 0.5 sec safe interruption bridging against switch bounce and vibration
- Absolutely vibration-proof through SMD technology
- No mechanical wear of any kind
- Ideal for all applications with strong digital and power servos
- Voltage drop max. 0.2V at 20A
- Only passive, fail-safe electronic components, no software