GRAUPNER DES 587 BB MG DIGITAL SERVO
Product number:
78321
Manufacturer number:
7932.LOSE
GTIN/EAN:
4013389456340
Description "GRAUPNER DES 587 BB MG DIGITAL SERVO"
Especially suitable for motor and glider models, micro helicopters and RC boat models.
warning notes of the company Graupner/SJ! Possible malfunction with this servo
With this servo with metal gear the potentiometer operating voltage is transmitted to the metal axis of the servo. The use of aluminium control horns or a non-insulated RDS linkage with a conductive connection, e.g. in a full carbon fibre model, causes mutual interference between the servos, as the above-mentioned voltage is transmitted. Therefore please use either plastic control surface horns or insulate the mountings so that there is no electrical connection.
The Graupner/SJ GmbH company as manufacturer recommends that you use only components and accessories which have been tested for suitability and safety by Graupner/SJ and which have been approved for use. In this case Graupner/SJ will assume product responsibility for you. Graupner/SJ accepts no liability for non-approved parts or accessory products from other manufacturers and cannot evaluate every single third-party product. Whether it can be used without safety risk.
Designed with precision components for durability and long-life operations, the Graupner DES 261 BB Digital Micro-Servo delivers maximum torque and speed with minimum weight. Don’t be fooled by the small size: you will be surprised with the precision, torque and speed the DES 261 BB can deliver, making it the perfect choice for indoor, outdoor and park flyer models.
The DES 261 BB can be specially programmed to meet all your needs via the free Graupner Servo Setup Software.
FEATURES
warning notes of the company Graupner/SJ! Possible malfunction with this servo
With this servo with metal gear the potentiometer operating voltage is transmitted to the metal axis of the servo. The use of aluminium control horns or a non-insulated RDS linkage with a conductive connection, e.g. in a full carbon fibre model, causes mutual interference between the servos, as the above-mentioned voltage is transmitted. Therefore please use either plastic control surface horns or insulate the mountings so that there is no electrical connection.
The Graupner/SJ GmbH company as manufacturer recommends that you use only components and accessories which have been tested for suitability and safety by Graupner/SJ and which have been approved for use. In this case Graupner/SJ will assume product responsibility for you. Graupner/SJ accepts no liability for non-approved parts or accessory products from other manufacturers and cannot evaluate every single third-party product. Whether it can be used without safety risk.
Designed with precision components for durability and long-life operations, the Graupner DES 261 BB Digital Micro-Servo delivers maximum torque and speed with minimum weight. Don’t be fooled by the small size: you will be surprised with the precision, torque and speed the DES 261 BB can deliver, making it the perfect choice for indoor, outdoor and park flyer models.
The DES 261 BB can be specially programmed to meet all your needs via the free Graupner Servo Setup Software.
FEATURES
- Digital servo featuring dynamic torque, excellent Speed, superior response and holding torque
- Programmable Digital Circuit and SMT circuitry
- 1024 high resolution
- Supporting 1-16µ depending on programming
- Supports a wide range of frame rates 20Hz-400Hz
- 10-bit processing circuit
Technical data
| Bearing: | • |
|---|---|
| Gearbox Type: | Metal |
| Weight (g): | 6 kg |
| Length (mm): | 29,5 |
| Wide (mm): | 13 |
| Height (mm): | 32,4 |
| Servo type: | Digital |
| Gear tooth: | 25 |
| Torque kg/cm (4,8V): | 3,6 |
| Speed sec./60° (4,8V): | 0,2 |
| Torque kg/cm (6V): | 4,2 |
| Speed sec./60° (6V): | 0,16 |
Graupner, based in Kirchheim, Germany, was founded by the family Graupner and, up until March 2013, operated under the third Graupner generation from Stefan Graupner. In March 2013, the company was purchased by the manufacturer of Graupner HoTT RC Transmitter Systems. Graupner covers a large RC assortment including RC Cars and Trucks (GM), Helicopters, Airplanes, RC Electronics (HoTT 2,4GHZ), Chargers, RC Glow-Powered Motors (OS) as well as a large variety of Electric-Powered Brushless Motors. Graupner supplies around 2000 retailers throughout the world.