Description "Pelikan Foxy 400 7,2V Gleichstrommotor"
Brushed electric motors of „FOXY Brushed“ range are perfect for a whole lot of model builder's applications - for powering aircraft, boat, car, tank and other ground vehicle models either with direct drive or with a gearbox.
When connecting and installing foxy motors, pay attention to the allowed voltage and load current limit.
Motor cooling: operating temperature of the housing shouldn't exceed 80°C. The model should always have sufficient air intake and air-flow around the motor. For boat models, we recommend using water cooling. High motor loads are possible only for short periods. After every driving/riding/flying session, you should let the motor cool down to a room temperature before the next ride/flight/drive.
FOXY 400 7.2 V is a brushed electric motor size "400" with a shaft with a diameter 2.3mm and plain bearings. It is suitable for powering indoor aircraft models with direct drive (6x3" propeller) or with a gearbox for a small car and boat models (25–30mm propeller).
For controlling the RPM, you will need an ESC with a load capacity of 12–15A.
FOXY 400 7.2V is a suitable replacement for a motor SPEED 400 7.2V
Set contains:
Brushed electric motor FOXY 400 7.2V
User manual
When connecting and installing foxy motors, pay attention to the allowed voltage and load current limit.
Motor cooling: operating temperature of the housing shouldn't exceed 80°C. The model should always have sufficient air intake and air-flow around the motor. For boat models, we recommend using water cooling. High motor loads are possible only for short periods. After every driving/riding/flying session, you should let the motor cool down to a room temperature before the next ride/flight/drive.
FOXY 400 7.2 V is a brushed electric motor size "400" with a shaft with a diameter 2.3mm and plain bearings. It is suitable for powering indoor aircraft models with direct drive (6x3" propeller) or with a gearbox for a small car and boat models (25–30mm propeller).
For controlling the RPM, you will need an ESC with a load capacity of 12–15A.
FOXY 400 7.2V is a suitable replacement for a motor SPEED 400 7.2V
Set contains:
Brushed electric motor FOXY 400 7.2V
User manual