Dualsky Summit 45Lite ESC
Product number:
9816081
Manufacturer number:
42398
| Battery-side connector: | ohne |
|---|---|
| Cells (LiPo): | 3-6 |
| Current duration (A): | 45 |
| Engine-side connector: | 3,5mm Goldkontakt |
| Max current (A): | 70 |
| Weight (g): | 44 |
| BEC: | 6V/6A |
| Length (mm): | 66 |
| Type: | Brushless |
| Width (mm): | 25 |
| Height (mm): | 10,7 |
| BEC or OPTO: | BEC |
Key Features & Performance:
32-bit ARM system:
A new generation of cost-effective electronic drive systems with a drive frequency of up to 48 MHz.
High eRPM:
Supports maximum speeds of up to 510K eRPM.
Efficient heat dissipation:
Use of high-quality MOSFETs with extremely low internal resistance and a multi-layer printed circuit board (PCB) with low internal resistance to effectively reduce the system’s operating temperature.
Flight stability:
Efficient drive core to effectively prevent synchronisation loss (“Sync-Loss”), also optimised to support 28-pin outrunners from the Dualsky GA series.
Regenerative braking:
Supports energy recovery during deceleration.
Sine wave mode:
Supports a sine wave mode that can increase efficiency by up to 5%.
Direction of rotation:
The direction of rotation can be flexibly adjusted; a bidirectional operating mode (e.g. for 3D flight) is also supported.
Protocols & signal support:
Versatile signal support: In addition to the classic PWM throttle signal, modern digital signals such as Multishot, Oneshot, Dshot & Proshot are supported (firmware based on BLHeli-32).
Comprehensive telemetry:
Supports native KISS telemetry data (temperature, voltage, current, power consumption, electrical speed) as standard. Using the optional Dualsky TELELink module, this data can be converted into common RC protocols.
Protection functions:
Multi-level protection system: Integrated protection against throttle malfunctions, low voltage, overcurrent, overtemperature and protection against power loss at low RPM.
Quality testing:
Passed 100% load testing, compliant with the ISO9001:2015 quality management system.
Programmability:
Numerous parameters can be adjusted via PC software and a suitable USB interface (e.g. Dualsky USB-Link), including start-up behaviour, timing, braking force, Demag compensation, telemetry intervals and signal calibration.
Dualsky Advanced Power Systems produces high quality RC accessories and components. Since 2004, Dualsky has concentrated on Brushless Outrunner Motors, Electronic Speed Controllers, and long lasting LiPo Battery Packs. Their products have been known to produce competition performance with little cost.
32-bit ARM system:
A new generation of cost-effective electronic drive systems with a drive frequency of up to 48 MHz.
High eRPM:
Supports maximum speeds of up to 510K eRPM.
Efficient heat dissipation:
Use of high-quality MOSFETs with extremely low internal resistance and a multi-layer printed circuit board (PCB) with low internal resistance to effectively reduce the system’s operating temperature.
Flight stability:
Efficient drive core to effectively prevent synchronisation loss (“Sync-Loss”), also optimised to support 28-pin outrunners from the Dualsky GA series.
Regenerative braking:
Supports energy recovery during deceleration.
Sine wave mode:
Supports a sine wave mode that can increase efficiency by up to 5%.
Direction of rotation:
The direction of rotation can be flexibly adjusted; a bidirectional operating mode (e.g. for 3D flight) is also supported.
Protocols & signal support:
Versatile signal support: In addition to the classic PWM throttle signal, modern digital signals such as Multishot, Oneshot, Dshot & Proshot are supported (firmware based on BLHeli-32).
Comprehensive telemetry:
Supports native KISS telemetry data (temperature, voltage, current, power consumption, electrical speed) as standard. Using the optional Dualsky TELELink module, this data can be converted into common RC protocols.
Protection functions:
Multi-level protection system: Integrated protection against throttle malfunctions, low voltage, overcurrent, overtemperature and protection against power loss at low RPM.
Quality testing:
Passed 100% load testing, compliant with the ISO9001:2015 quality management system.
Programmability:
Numerous parameters can be adjusted via PC software and a suitable USB interface (e.g. Dualsky USB-Link), including start-up behaviour, timing, braking force, Demag compensation, telemetry intervals and signal calibration.
Dualsky Advanced Power Systems produces high quality RC accessories and components. Since 2004, Dualsky has concentrated on Brushless Outrunner Motors, Electronic Speed Controllers, and long lasting LiPo Battery Packs. Their products have been known to produce competition performance with little cost.
Manufacturer and responsible person (information obligations under the GPSR Product Safety Regulation)
Modellbau Lindinger GmbH
Industriestraße 10
4565 Inzersdorf
ÖSTERREICH
Telefon: +43/7582/81313-0
[email protected]