Electronic Switch/Backup System for Two Batteries (or BEC/Battery), with a voltage of 5-8.4 V, continuous current up to 15 A, and telemetry support for KAVAN/FrSky FPort, Duplex EX, Futaba S.BUS2, Multiplex MSB, Graupner Hott, PowerBox P2Bus (current, voltage, capacity for both inputs). Contactless touch switch, silicone cables 1mm² without connectors, dimensions 40x21x6mm, weight 23g.The T70-C is a powerful digital switch/backup system with a voltage range of 5-8.4 V and a continuous current of up to 15 A, offering extended telemetry functions. The device includes a charging circuit and features a touch-switch function. It is ideal for medium-sized models, such as those using HV servos without voltage stabilization.
The T70-C is suitable for models equipped with either two receiver batteries or a regulator with a BEC circuit in combination with a small backup battery. The device prioritizes its primary battery input, and when the voltage drops, it automatically switches to the secondary input. The charging circuit can optionally be activated to charge the backup battery from the primary input/BEC.
The T70-C is designed to switch your model's electronics on/off and can completely replace a mechanical switch. The device remembers its last operating state, and if the battery is accidentally disconnected, T70-C will automatically restart when the battery is reconnected.
The input and output cables of the T70-C are silicone-insulated cables with a cross-section of 1mm² without connectors.Features:- Intelligent dual-battery switch/alternator with configurable voltage switch threshold
- Touch-switch function. Optional connection for a magnetic, mechanical, or electronic switch or button
- Telemetry support for KAVAN/FrSky FPort, Duplex EX, Futaba S.BUS2, Multiplex MSB, Graupner Hott, PowerBox P²Bus (current, voltage, capacity of both current inputs)
- Optional backup battery charging (up to 200 mA)
- Switch with memory for the last operating state
- Minimal power consumption when off (100 µA)
- Two extension ports for connecting additional Duplex EX/EX-Bus sensors, which can also be used as digital inputs and outputs
- Configuration via transmitter or PC software MAV Manager
- Firmware updates
