Features:
- SRS - Serial Receiver System for the possibility to use receivers with serial interface, Spektrum DSM 2 and DSM X, Multiplex M-Link, Futaba SB Jeti R-Sat.
- Free channel assignment of the PowerBox outputs
- Integrated, high-resolution graphic OLED display with 128x64 pixels
- Particularly user-friendly menu-driven programming with the SensorSwitch
- 14 channels including 1 channel for the door sequencer
- Pulse amplification and suppression for all 14 channels and 18 servos
- Synchronized servo output for absolute servo synchronization
- Flight recorder, recording of lost frames and failsafe phases of the connected receivers
- Adjustable frame rate between 12ms - 21ms
- 16bit processor for high resolution and fast signal processing
- 4 match channels for 2 servos each. All 8 servos are precisely adjustable
- Double regulated output voltage for receiver and servos
- Connection option for the return channel bus systems Spektrum and Multiplex MSB
- Transmission of battery voltages and capacities directly to the transmitter
- Voltage and capacity display for each battery separately
- Servo voltage selectable via software 5.9V or 7.4V
- Minimum value memory indicates possible voltage drops
- Large cooling surfaces for high controller capacity
- Controller monitoring and controller error display
- 3 battery types are supported: Lipo, NiMh/NiCd, LiFePo
- suppression of any servo reverse currents that may occur
- Operating voltage: 4.0 Volt to 9.0 Volt
- Power supply:
2 x 2 cell LiPO battery 7.4 Volt
2 x NiCd or NiMH batteries with 5 cells
2 x 2 cell LiFePo battery (A123)
- Power consumption:
switched on state approx. 125 mA
switched off state approx. 33 µA
- Dropout voltage: approx. 0.25 V
- Max. Receiver and 2 x 10 A (stabilized)
depending on cooling Servo current: peak 2 x 20 A
- Servo pulse resolution: 0.5µs
- Pulse repetition rate (frame rate): 12ms, 15ms, 18ms, 21ms
- Display: OLED 128x64 pixels, graphic
- Servo connections: 21 slots, 12 channels
- Temperature range: -30 °C to +75 °C
- Weight: 115 g
- SensorSwitch: 15 g
- EMC test: EN 55014-1:2006
- CE approval: 2004/108/EG
- WEEE-Reg. no.: DE 639 766 11