- AIRPLANES
- DRONES & HELICOPTERS
- CARS & BOATS
- RC ELECTRONICS
- BATTERIES
- SUPPLIES & MISC
- NEW
- SALE
- RC Blog
- BRANDS
Filter
–
–
MP-JET Threaded insert M3 short (20 pieces)
€8.49*
Product no.:
9795599
Manufacturer no.:
MPJ 1903 BR
Thread inserts for heat set installation. These inserts are suitable for injection moulded parts, but also for 3D printed parts. Brass thread inserts prolong the parts' longevity and enable dismantling the screw connection without any significant wear. MPJ 1903 BR
MP-JET Thread insert M3 long (20 pieces)
€8.99*
Product no.:
9795600
Manufacturer no.:
MPJ 1904 BR
Thread inserts for heat set installation. These inserts are suitable for injection moulded parts, but also for 3D printed parts. Brass thread inserts prolong the parts' longevity and enable dismantling the screw connection without any significant wear. MPJ 1904 BR
MP-JET Thread insert M4 short (20 pieces)
€9.49*
Product no.:
9795601
Manufacturer no.:
MPJ 1905 BR
Thread inserts for heat set installation. These inserts are suitable for injection moulded parts, but also for 3D printed parts. Brass thread inserts prolong the parts' longevity and enable dismantling the screw connection without any significant wear. MPJ 1905 BR
MP-JET Thread insert M4 long (20 pieces)
€9.99*
Product no.:
9795602
Manufacturer no.:
MPJ 1906 BR
Thread inserts for heat set installation. These inserts are suitable for injection moulded parts, but also for 3D printed parts. Brass thread inserts prolong the parts' longevity and enable dismantling the screw connection without any significant wear. MPJ 1906 BR
MP-JET Thread insert M5 short (20 pieces)
€10.49*
Product no.:
9795603
Manufacturer no.:
MPJ 1907 BR
Thread inserts for heat set installation. These inserts are suitable for injection moulded parts, but also for 3D printed parts. Brass thread inserts prolong the parts' longevity and enable dismantling the screw connection without any significant wear. MPJ 1907 BR
MP-JET Thread insert M5 long (20 pieces)
€10.99*
Product no.:
9795604
Manufacturer no.:
MPJ 1908 BR
Thread inserts for heat set installation. These inserts are suitable for injection moulded parts, but also for 3D printed parts. Brass thread inserts prolong the parts' longevity and enable dismantling the screw connection without any significant wear. MPJ 1908 BR
MP-JET Threaded insert M2 (20 pieces)
€7.99*
Product no.:
9795597
Manufacturer no.:
MPJ 1901 BR
Thread inserts for heat set installation. These inserts are suitable for injection moulded parts, but also for 3D printed parts. Brass thread inserts prolong the parts' longevity and enable dismantling the screw connection without any significant wear. MPJ 1901 BR
MP-JET Threaded insert M2,5 (20 pieces)
€7.99*
Product no.:
9795598
Manufacturer no.:
MPJ 1902 BR
Thread inserts for heat set installation. These inserts are suitable for injection moulded parts, but also for 3D printed parts. Brass thread inserts prolong the parts' longevity and enable dismantling the screw connection without any significant wear. MPJ 1902 BR
MODELLBAU LINDINGER Serrated nuts M2,5 8pcs.
€5.99*
Product no.:
9791391
Manufacturer no.:
KAV0088B
KAV0088B
Modellbau Lindinger Shaft circlips 2.5mm 25pcs. Stainless steel, rustproof
€1.99*
Product no.:
9790598
Manufacturer no.:
109030
Screw assembly made of stainless steel (A2). No more corrosion or rust even in adverse applications. For universal uses not only in model making. 109030
Modellbau Lindinger Shaft circlips 3mm 25pcs. Stainless steel, rustproof
€1.99*
Product no.:
9790599
Manufacturer no.:
109031
Screw assembly made of stainless steel (A2). No more corrosion or rust even in adverse applications. For universal uses not only in model making. 109031
Modellbau Lindinger Shaft circlips 4mm 25pcs. Stainless steel, rustproof
€1.99*
Product no.:
9790600
Manufacturer no.:
109032
Screw assembly made of stainless steel (A2). No more corrosion or rust even in adverse applications. For universal uses not only in model making. 109032
Modellbau Lindinger Shaft circlips 5mm 25pcs. Stainless steel, rustproof
€1.99*
Product no.:
9790601
Manufacturer no.:
109033
Screw assembly made of stainless steel (A2). No more corrosion or rust even in adverse applications. For universal uses not only in model making. 109033
MODELLBAU LINDINGER Hoseclamp set 26 pieces
€9.99*
Product no.:
9780587
Manufacturer no.:
1533655
1533655
ABSIMA COUNTERSUNK SCREW SET 100PCS. M3/M4
€13.95*
Product no.:
9766871
Manufacturer no.:
3020003
3020003
ABSIMA ROUND-HEAD SCREW-SET 100PCS. M3/M4
€15.95*
Product no.:
9766870
Manufacturer no.:
3020004
3020004
MODELLBAU LINDINGER SCREW SET MODELLBAU 1340 PARTS METRIC INCL. HEXAGON SCREWDRIVER
€39.99*
Product no.:
9749914
Manufacturer no.:
A 93623
Screw assortment for model making High-quality screw assortment in the dimensions from M2 to M6, consisting of 1340 parts. Included are cylinder head screws, washers, self-locking nuts, offset screwdrivers, servo screws and drive-in nuts. All screws are in grade 12.9 (high-strength steel). This makes it almost impossible to round off the screw heads. A 93623
LOCTITE SCREW LOCK 222 LOW STRENGTH 10ML
€17.99*
Product no.:
9732695
Manufacturer no.:
191183
Screw lock - low strength. Easy to remove. Suitable for all threaded metal connections. LOCTITE 222 is a low strength threadlocker which allows adjustment of screws, including countersunk screws and set screws. Well suited for use on metals that could break during disassembly, e.g. aluminium or brass. The product is suitable for all metals including passive materials such as stainless steel, aluminium and galvanised surfaces. It has proven tolerance to low levels of contamination from industrial oils, e.g. engine, anti-corrosion and cutting oils. Your advantages: Ideal as a low-strength threadlocker for adjusting screws, countersunk screws and set screwsPrevents loosening due to vibration, e.g. on pumps, gears or pressesConnections can be dismantled with hand toolsEspecially suitable for small threadsP1 NSF Reg. No.: 123002Technical data:Colour: violetMax. Thread size: up to M36Operating temperature range: -55 to +150 °CBreakaway torque: 6 NmApprovals: P1 NSF Reg. No.: 123002Manual strength steel: 15 min.Manual strength brass: 8 min.Hand strength stainless steel: 360 min.Thixotropic: Yes2.2 Labelling elements 9/2020:Signal word CautionContains. -dimethylbenzyl hydroperoxideHazard statementsH319 Causes severe eye irritation.H335 May cause respiratory irritation.H412 Harmful to aquatic life with long lasting effects.Safety information ***For private end users only: P101 If medical advice is needed, have container or label at hand.Have container or label at hand. P102 Keep out of the reach of children.P501 Dispose of contents/container in accordance with national regulations ***.P261 Avoid inhalation of vapour.P273 Avoid release into the environment.P337+P313 If eye irritation persists: Get medical advice/attention.2.3 Other hazardsNone if used as directed.Does not meet the criteria Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very Bioaccumulative (vPvB). 191183
LOCTITE SCREW LOCK 290 HIGH-STRENGTH 10ML FOR SUBSEQUENT SECURING OF SCREWS
€20.99*
Product no.:
9732694
Manufacturer no.:
191182
Screw lock - medium/high strength. Ideal for screws in pre-assembled parts. LOCTITE 290 is a medium/high strength liquid threadlocker for securing and sealing threaded joints. Due to its low viscosity and high capillary action, the product penetrates into the thread interstices without the joints having to be loosened first. The product cures in the absence of air between close-fitting metal surfaces and prevents independent loosening and leaks caused by shocks and vibrations. The product can also fill porosities in welds, cast and sintered metal parts. Your advantages: Ideal for securing pre-assembled screw connections, e.g. on measuring and control equipment, electrical connections and for adjusting screwsSuitable for metal onlyProven tolerance to low levels of contamination from industrial oils, e.g. engine, anti-corrosion and cutting oilsMust be heated for disassemblyTechnical data:Colour: greenMax. Thread size: up to M6Operating temperature range: -55 to +150 °CBreakaway torque: 10 NmManual strength steel: 20 min.Manual strength brass: 20 min.Manual strength stainless steel: 60 min.Thixotropic: No2.2 Labelling elements 6/2020:Signal word CautionContains. - dimethylbenzyl hydroperoxideHazard statementsH319 Causes severe eye irritation.H335 May cause respiratory irritation.H412 Harmful to aquatic life with long lasting effects.Supplementary information Contains: Methyl methacrylate May cause allergic reactions.Safety information ***For private end users only: P101 If medical advice is needed, have container or label at hand.Have container or label at hand. P102 Keep out of the reach of children.P501 Dispose of contents/container in accordance with national regulations ***.P261 Avoid inhalation of vapour.P273 Avoid release into the environment.P337+P313 If eye irritation persists: Get medical advice/attention.2.3 Other hazardsNone if used as directed.Does not meet the criteria Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very Bioaccumulative (vPvB). 191182
LOCTITE SCREW LOCK 2701 HIGH STRENGTH 5ML
€10.99*
Product no.:
9732693
Manufacturer no.:
111215
LOCTITE 2701 High-strength screw lock, especially for chrome-plated surfaces. Technical data:Max. Thread size: Up to M20Strength: HighBreakaway torque, screws M10: 38NmHand strength on steel: 10 min.Manual strength on brass: 4 min.Hand strength on stainless steel: 25 min.Operating temperature range: -55°C to +150°CPrevents unwanted movement, loosening, leakage and corrosion in the threadVibration resistantThrough threads are sealed at the same time2.2 Marking elements 10/2020:Signal word CautionContains:Hydroxypropyl methacrylateethylenedioxydiethyldimethacrylateMethacryloyloxyethyl succinatedimethylbenzyl hydroperoxidephenylacetohydrazidehydroxyethyl methacrylatePropylene glycol dimethacrylateHazard statementsH317 May cause an allergic skin reaction.H319 Causes severe eye irritation.H335 May cause respiratory irritation.H412 Harmful to aquatic life with long lasting effects.Safety information ***For private end users only: P101 If medical advice is needed, have container or label at hand.Have container or label at hand. P102 Keep out of the reach of children.P501 Dispose of contents/container in accordance with national regulations ***.P261 Avoid breathing vapour.P280 Wear protective gloves.P273 Avoid release to the environment.P333+P313 If skin irritation or rash occurs: Get medical advice/attention.P337+P313 If eye irritation persists: Get medical advice/attention.2.3 Other hazardsNot corrosive to eyes according to test method OECD 438 or based on analogues to similar products tested.Does not meet the criteria Persistent, Bioaccumulative and Toxic (PBT), Very Persistent and Very Bioaccumulative (vPvB). 111215
LOCTITE JOINT 648 HIGH STRENGTH 5ML NOT SUITABLE FOR WOOD AND PLASTIC
€11.99*
Product no.:
9715814
Manufacturer no.:
056060
Joining adhesive - high strength. High temperature resistance. Ideal for joining clearance or press-fit joints. LOCTITE 648 is used for bonding cylindrical joining parts. The product cures in the absence of air between close-fitting metal surfaces, enabling the transfer of higher forces and power in existing geometry and design solutions. It achieves robust curing performance. The product can also be used on passive materials and achieves high temperature and oil resistance.Your advantages: High temperature resistanceProven tolerance to low levels of contamination from industrial oils.High strength on all metals, even on passive materials (e.g. stainless steel)Ideal for joining clearance or interference fit jointsP1 NSF Reg. No.: 148350DVGW (EN 751-1): NG 5146C00236WRAS (BS 6920): 0808532Technical data:Colour: greenMax. Gap: 0.15 mmApplication temperature range: -55 to +180 °CTensile shear strength: > 25 N/mm²Approvals: P1 NSF, Reg. No.: 148350, DVGW (EN 751-1): NG 5146C00236, WRAS (BS 6920): 0808532 Hand strength steel: 3 min.Thixotropic: No2.2 Labelling elements 6/2017:Signal word DangerContains: Product is based on methacrylate resin and contains acrylic acid.Hazard statementsH315 Causes skin irritation.H317 May cause an allergic skin reaction.H318 Causes serious eye damage.H335 May cause respiratory irritation.H412 Harmful to aquatic life with long lasting effects.Safety information "***" ***For consumer use only: P101 If medical advice is needed,Have packaging or label at hand. P102 Keep out of the reach of children.Keep out of the reach of children. P501 Dispose of waste and residues in accordance with local regulations.Dispose of in accordance with local regulations.P261 Avoid inhalation of vapours.P273 Avoid release into the environment.P280 Wear protective gloves/eye protection.P302+P352 IF ON SKIN: Wash with plenty of soap and water.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing.P333+P313 If skin irritation or rash occurs: Get medical advice/attention.2.3 Other hazardsNot corrosive to skin according to test method B40 Skin corrosion - Human skin model assay, according to test method OECD 431 or based on analogues to similar products tested.Does not meet the criteria persistent, bioaccumulative and toxic (PBT), very persistent and very bioaccumulative (vPvB).None when used as intended. 056060
LOCTITE SCREW LOCK 243 MEDIUM 5ML
€10.99*
Product no.:
9715815
Manufacturer no.:
058025
Screw locking lacquer for fixing screws and nuts, ideal for RC car and helicopter models.Screw lock - medium strength. Universally applicable. Suitable for all threaded metal connections. LOCTITE 243 is a universally applicable medium-strength screw lock. This product secures screws, nuts and stud bolts against loosening due to vibration and seals at the same time. It is suitable for all metals, including passive materials such as stainless steel, aluminium and galvanised surfaces. It has proven tolerance to low levels of contamination from industrial oils, e.g. engine, anti-corrosion and cutting oils. Your advantages: Prevents loosening due to vibration, e.g. on pumps, gears or pressesSuitable for all metals, including passive materials (e.g. stainless steel, aluminium, galvanised surfaces)Proven tolerance to low levels of contamination from industrial oils, e.g. motor, anti-corrosion and cutting oilsConnections can be dismantled for maintenance with hand toolsP1 NSF Reg. No.: 123000Technical data:Colour: blueMax. Thread size: up to M36Operating temperature range: -55 to +180 °CBreakaway torque: 26 NmApprovals: P1 NSF Reg. No.: 123000Manual strength steel: 10 min.Manual strength brass: 5 min.Hand strength stainless steel: 10 min.Thixotropic: Yes2.2 Labelling elements 10/2020:Signal word CautionContains: Tetramethylene dimethacrylateMaleic acid2'-PhenylacetohydrazideHazard statementsH315 Causes skin irritation.H317 May cause an allergic skin reaction.H319 Causes severe eye irritation.H335 May cause respiratory irritation.H411 Toxic to aquatic life with long lasting effects.Safety information ***For consumer use only: P101 If medical advice is needed, have container or label at hand.Have container or label at hand. P102 Keep out of the reach of children.P501 Dispose of contents/container in accordance with national regulations ***.P261 Avoid inhalation of vapour.P273 Avoid release to the environment.P280 Wear protective gloves.P302+P352 IF ON SKIN: Wash with plenty of soap and water.P333+P313 If skin irritation or rash occurs: Get medical advice/attention.P337+P313 If eye irritation persists: Get medical advice/attention.2.3 Other hazardsNone if used as directed.Does not meet the criteria Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very Bioaccumulative (vPvB). 058025
Modellbau Lindinger CIRCLIPS 2,5MM 10PCS. STAINLESS STEEL, 10PCS.
€1.49*
Product no.:
9711005
Manufacturer no.:
10169
Screw assembly made of stainless steel (A2). No more corrosion or rust even in adverse applications. For universal uses not only in model making. 10169
Modellbau Lindinger COLLETS 6MM CLAMPABLE 5PCS.
€8.99*
Product no.:
95456
Manufacturer no.:
30135
Aluminium collets clampable slotted in top quality! 30135
Modellbau Lindinger COLLETS 5MM CLAMPABLE 5PCS.
€8.99*
Product no.:
95455
Manufacturer no.:
30134
Aluminium collets clampable slotted in top quality! 30134
Modellbau Lindinger COLLETS 3MM CLAMPABLE 5PCS.
€8.99*
Product no.:
95453
Manufacturer no.:
30132
Aluminium collets clampable slotted in top quality! 30132
Modellbau Lindinger COLLETS 4MM CLAMPABLE 5PCS.
€8.99*
Product no.:
95454
Manufacturer no.:
30133
Aluminium collets clampable slotted in top quality! 30133
Modellbau Lindinger COLLETS 2MM CLAMPABLE 5PCS.
€8.99*
Product no.:
95452
Manufacturer no.:
30131
Aluminium collets clampable slotted in top quality! 30131
MODELLBAU LINDINGER SCREW ROSETTES M5 PLASTIC 10PCS.
€1.99*
Product no.:
86655
Manufacturer no.:
X0637
Für Senkkopfschrauben. Bildet einen sauberen bündigen Abschluss von div. Verschraubungen wie z.B. Flächenmontagen. X0637
MODELLBAU LINDINGER SCREW ROSETTES M4 PLASTIC 10PCS.
€1.49*
Product no.:
86654
Manufacturer no.:
X0636
Für Senkkopfschrauben. Bildet einen sauberen bündigen Abschluss von div. Verschraubungen wie z.B. Flächenmontagen. X0636