- AIRPLANES
- DRONES & HELICOPTERS
- CARS & BOATS
- RC ELECTRONICS
- BATTERIES
- SUPPLIES & MISC
- NEW
- SALE
- RC Blog
- BRANDS
Filter
–
–
-29%
R&G DPP™ CFRP Tube D1.00 x 0.50 x 1000mm
€4.80*
€6.79*
(29.31% saved)
Product no.:
9795487
Manufacturer no.:
64010005-100
64010005-100
R&G DPP™ CFRP tube D12.00 x 10.00 x 1000 mm
€15.85*
Product no.:
9790626
Manufacturer no.:
64120100-100
64120100-100
R&G VEC CARBON FIBER TUBE 12/10 X 2000 MM
€27.47*
Product no.:
95823
Manufacturer no.:
7312102
7312102
R&G CFRP -Roundtube pultruded (Ø9/7) x 1000mm
€12.54*
Product no.:
9780611
Manufacturer no.:
730907-100
730907-100
R&G CARBON FIBER TUBE WOUND 9/7MM X 1000MM
€16.76*
Product no.:
9749095
Manufacturer no.:
740907-100
740907-100
R&G CARBON FIBER ROUND TUBE PULTRUDED 4/3X1000MM
€4.28*
Product no.:
9747770
Manufacturer no.:
7304031
7304031
ZIMMERMANN STAINLESS STEEL TUBE 4MM X 0,3MM 1 METER LONG
€12.99*
Product no.:
9738234
Manufacturer no.:
1910
Material 1.4301 Geschweißte, kalt nachgezogene, ungeglühte Rohre aus nichtrostenden Stahl 1910
R&G CARBON FIBER TUBE -CYLINDRICAL- 3K-LW (25 X 10X 0,5) X 1000 MM
€28.42*
Product no.:
9729815
Manufacturer no.:
77251005-100
77251005-100
R&G CARBON FIBER TUBE -MP-, WRAPPED, 3K-LW (0 30 X 28) X 1000 MM
€38.27*
Product no.:
9729780
Manufacturer no.:
743028-MP-1
743028-MP-1
R&G CARBON FIBER TUBE, WRAPPED, 3K-LW (0 19 X 17) X 1000 MM
€31.22*
Product no.:
9729752
Manufacturer no.:
741901701
741901701
R&G CARBON FIBER TUBE, WRAPPED, 3K-KP (0 16 / 14) X 1000 MM
€22.97*
Product no.:
9729747
Manufacturer no.:
741614-TW-1
741614-TW-1
R&G CARBON FIBER TUBE ± 45°, WRAPPED, 3K-LW (0 14/ 12) X 1000 MM
€27.25*
Product no.:
9729739
Manufacturer no.:
741412-45-1
CARBON CFRP round tubes wound 45°, LW (3k)Wound round tubes with high-quality, high-gloss surface made of 3k carbon fiber prepreg in plain weave, clear lacquered. The underlying core layers are made of UD fabric, a high-quality epoxy resin matrix.Fiber orientation:Outer layer: 45° (3k carbon fiber fabric with plain weave)Core layer: 0° (UD-carbon fiber layers)Inner layer: 30-45° (UD carbon fiber layers)Interlayers: very thin glass fabricFeatures:Low weight, very good corrosion and heat resistance and electrical conductivity. Very good torsional and circumferential stiffness, but lower bending strength than other tubes.The coiled CFRP round tubes are ground to size after lamination and then painted.Tolerances:Diameter: max 0.1 mmAs a rule, these tubes cannot be telescoped without post-processing. 741412-45-1
R&G CARBON FIBER TUBE, WRAPPED, 3K-LW (0 12 / 10) X 2000 MM
€38.82*
Product no.:
9729728
Manufacturer no.:
741201002
741201002
R&G CARBON FIBER TUBE, WRAPPED, 3K-LW (0 12/ 10) X 1000 MM
€21.68*
Product no.:
9729727
Manufacturer no.:
741201001
741201001
R&G CARBON FIBER TUBE, WRAPPED, 3K-KP (0 10 X 8) X 1000 MM
€21.37*
Product no.:
9729725
Manufacturer no.:
741008-TW-1
741008-TW-1
R&G CARBON FIBER TUBE ± 45°, WRAPPED, 3K-LW (0 8 X 6) X 1000 MM
€19.20*
Product no.:
9729714
Manufacturer no.:
740806-45-1
740806-45-1
R&G CARBON FIBER TUBE, WRAPPED, 3K-KP (0 8 X 6) X 1000 MM
€15.53*
Product no.:
9729715
Manufacturer no.:
740806-TW-1
740806-TW-1
R&G CARBON FIBER TUBE "PULLWINDING"- (0 8 / 6) X 2000 MM
€21.65*
Product no.:
9729690
Manufacturer no.:
730806-PW-200
730806-PW-200
R&G CARBON FIBER TUBE "PULLWINDING"- (0 10/8) X 1000 MM
€17.05*
Product no.:
9729692
Manufacturer no.:
731008-PW-100
731008-PW-100
R&G CARBON FIBER SQUARE TUBE WITH INNER ROUND TUBE 4X4/3MM 1M
€6.41*
Product no.:
9710517
Manufacturer no.:
7604041
7604041
R&G VEC CFRP ROUNDPIPE PULLWIND ED 12/10MM 1M
€18.74*
Product no.:
9702909
Manufacturer no.:
731210-PW-100
VEC round tube pullwinded! Pull-winded carbon fibre tube with longitudinal fibre orientation (unidirectional), additionally reinforced with torsion layers. The pull-winding process is a further development of the pultrusion process (continuous drawing process), in which the reinforcing fibres are wound onto the UD layers by rotating winding devices. Tubes produced in this way are much higher quality than purely extruded tubes, since the additional torsion layers increase both the compressive strength and the torsional stiffness of the tubes. VEC™-CFK (vinyl ester resin carbon) - are produced in pultrusion/pull-winding, fibre winding and wet-pressing processes. Vinylester is a combination of epoxy resin and polyester resin. Outstanding properties are high temperature resistance and chemical resistance combined with very good mechanical properties. Tolerances: Straightness deviation max. 2 mm/m. This maximum value is usually not reached. 731210-PW-100
R&G VEC PIPE 22/18MM 1M WRAPPED
€53.70*
Product no.:
96336
Manufacturer no.:
7422181
Tube made of carbon fibre and vinyl ester resin. VEC™-CFK (vinyl ester resin carbon) - are produced in pultrusion/pull-winding, fibre winding and wet-pressing processes. Vinylester is a combination of epoxy resin and polyester resin. Outstanding properties are high temperature resistance and chemical resistance combined with very good mechanical properties. Tolerances: Straightness deviation max. 2 mm/m. This maximum value is usually not reached. 7422181
R&G VEC PIPE 14/12MM 1M WRAPPED
€23.10*
Product no.:
96335
Manufacturer no.:
7414121
Tube made of carbon fibre and vinyl ester resin. VEC™-CFK (vinyl ester resin carbon) - are produced in pultrusion/pull-winding, fibre winding and wet-pressing processes. Vinylester is a combination of epoxy resin and polyester resin. Outstanding properties are high temperature resistance and chemical resistance combined with very good mechanical properties. Tolerances: Straightness deviation max. 2 mm/m. This maximum value is usually not reached. 7414121
R&G VEC PIPE 12/11MM 1M WRAPPED
€19.20*
Product no.:
96334
Manufacturer no.:
7412111
Tube made of carbon fibre and vinyl ester resin. VEC™-CFK (vinyl ester resin carbon) - are produced in pultrusion/pull-winding, fibre winding and wet-pressing processes. Vinylester is a combination of epoxy resin and polyester resin. Outstanding properties are high temperature resistance and chemical resistance combined with very good mechanical properties. Tolerances: Straightness deviation max. 2 mm/m. This maximum value is usually not reached. 7412111
R&G VEC PIPE 10/8MM 1M WRAPPED
€21.37*
Product no.:
96333
Manufacturer no.:
7410081
Tube made of carbon fibre and vinyl ester resin. VEC™-CFK (vinyl ester resin carbon) - are produced in pultrusion/pull-winding, fibre winding and wet-pressing processes. Vinylester is a combination of epoxy resin and polyester resin. Outstanding properties are high temperature resistance and chemical resistance combined with very good mechanical properties. Tolerances: Straightness deviation max. 2 mm/m. This maximum value is usually not reached. 7410081
R&G VEC PIPE 22/21MM 1M
€19.60*
Product no.:
95569
Manufacturer no.:
7422211
VEC™-CFK (vinyl ester resin carbon) - are produced in pultrusion/pull-winding, fibre winding and wet-pressing processes. Vinylester is a combination of epoxy resin and polyester resin. Outstanding properties are high temperature resistance and chemical resistance combined with very good mechanical properties. Tolerances: Straightness deviation max. 2 mm/m. This maximum value is usually not reached. 7422211
DPP CARBON FIBER SQUARE TUBE 6X6/4,1X4,1MM 1M R
€10.99*
Product no.:
95210
Manufacturer no.:
650600410-100
DPP square tube pultruded from HT carbon fibers and epoxy resin. The fibres are unidirectional, achieving a higher fibre volume fraction with very low air void content. 650600410-100
DPP CARBON FIBER SQUARE TUBE 4X4/2,5X2,5
€9.54*
Product no.:
95209
Manufacturer no.:
65040026-100
DPP square tube pultruded from HT carbon fibers and epoxy resin. The fibres are unidirectional, achieving a higher fibre volume fraction with very low air void content. 65040026-100
DPP" CARBON FIBER TUBE 2,0/1,0X1000MM
€5.58*
Product no.:
94724
Manufacturer no.:
64020010-100
64020010-100
R&G VEC-SQUARE PIPE 10X10/8X8/1000MM
€17.29*
Product no.:
85725
Manufacturer no.:
7510081
Vierkantrohr aus Kohlefaser und Vinylesterharz. VEC™-CFK (vinyl ester resin carbon) - are produced in pultrusion/pull-winding, fibre winding and wet-pressing processes. Vinylester is a combination of epoxy resin and polyester resin. Outstanding properties are high temperature resistance and chemical resistance combined with very good mechanical properties. Tolerances: Straightness deviation max. 2 mm/m. This maximum value is usually not reached. 7510081