R&G SILICONE RUBBER KDSV-10 SET A+B 1,05KG SHORE 10 (SOFT-ELASTIC)

Product number: 9770409
Manufacturer number: 415200-10-2
GTIN/EAN: 4044199102615

€27.84*

Content: 1.03 kg (€27.03* / 1 kg)

Only a few left in stock, ready for shipment within 1 working day. Delivery time 1-3 working days.

Description "R&G SILICONE RUBBER KDSV-10 SET A+B 1,05KG SHORE 10 (SOFT-ELASTIC)"

Please be aware that this product can only be shipped to the following countries: Austria, Germany, Switzerland, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, France, Greece, Hungary, Italy, Luxembourg, Netherlands, Norway, Poland, Portugal, Romania, Serbia,  Slovakia, Slovenia, Spain, and the United Kingdom!

KDSV-10 is a pourable, condensation curing 2-component silicone rubber with low viscosity.

Very soft, for models with strong undercuts.

  • Excellent flowability
  • Easy processing
  • Very good tear resistance

Standard:
  • Mixing ratio: 100 : 2 parts by weight component A : component B
  • Processing time: 50 minutes
  • Curing time (HR 25 °C): 4-5 h

Alternatives:
  • Mixing ratios from 100 : 2 up to 100 : 3
  • Processing time (100 g in a cup at 25 °C):
  • 100 : 2 = approx. 50 minutes
  • 100 : 3 = approx. 30 minutes

  • Colour: White
  • Mixing viscosity: 13.000 ± 2.000 mPa·s
  • Shore A hardness: 10 ± 2
  • Tensile strength: > 2.4 N/mm²
  • Elongation at break: > 640 %
  • Tear resistance strength: > 13 N/mm
  • Linear shrinkage (after 7 days): <= 0.3 %

No heat of reaction occurs during vulcanization, so that even larger quantities (e.g. 10 kg) can be poured without the risk of overheating.

Customer information:
The release agent Semiperm™ Monofilm in combination with PARTALL® Coverall Film PVA is suitable as a safe release agent for silicone moulds. This combination of release agents provides a barrier layer so that casting with epoxy resins is also possible without any problems. The service life (durability) of the moulds is significantly extended.
The release agent Semiperm™ Monofilm is applied with a brush. After flash-off, PARTALL® Coverall Film PVA is applied, also with a brush or sponge. For more information on processing, see the release agents.
PARTALL® Coverall Film PVA is transferred to the casting, washed off with water after demolding and reapplied before each impression.


Technical data
Quantity / Length in meters: 1,03 kg
Contents of packaging: 1 kg Komp. A + 30 g Vernetzer
Technical data

Videos