R&G SILICONE RUBBER KDSV-25 CONTAINER 525G
Product number:
9732485
Manufacturer number:
4152002
GTIN/EAN:
4901331537707
€18.42*
Content:
0.515 kg
(€35.77* / 1 kg)
Only a few left in stock, ready for shipment within 1 working day. Delivery time 1-3 working days.
Description "R&G SILICONE RUBBER KDSV-25 CONTAINER 525G"
Please be aware that this product can only be shipped to the following countries: Austria, Germany, Switzerland, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, France, Greece, Hungary, Italy, Luxembourg, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, and the United Kingdom!
KDSV-25 is a pourable, condensation curing 2-component silicone rubber with high elasticity for replicas using cast ceramic, plaster, polyester and polyurethane resins (please use a wax release agent as protective film with epoxy resin).
Standard:
Alternatives:
In order to achieve optimal results, we recommend mixing ratio 100 : 2 or 100 : 3
Processing time (100 g in a cup at 23 °C, humidity 50 %):
No heat of reaction occurs during vulcanization, so that even larger quantities (e.g. 10 kg) can be poured without the risk of overheating.
Customer information:
The release agent Semiperm™ Monofilm in combination with PARTALL® Coverall Film PVA is suitable as a safe release agent for silicone moulds. This combination of release agents provides a barrier layer so that casting with epoxy resins is also possible without any problems. The service life (durability) of the moulds is significantly extended.
The release agent Semiperm™ Monofilm is applied with a brush. After flash-off, PARTALL® Coverall Film PVA is applied, also with a brush or sponge. For more information on processing, see the release agents.
PARTALL® Coverall Film PVA is transferred to the casting, washed off with water after demolding and reapplied before each impression.
- Good flowability
- Fast vulcanisation at room temperature
- Good tear strength and tear propagation strength
Standard:
- Mixing ratio: 100 : 2 parts by weight component A : component B
- Processing time: approx. 40 minutes
Alternatives:
In order to achieve optimal results, we recommend mixing ratio 100 : 2 or 100 : 3
Processing time (100 g in a cup at 23 °C, humidity 50 %):
- 100 : 2 = approx. 40 minutes
- 100 : 3 = approx. 30 minutes
- Colour: White
- Dyeing: R&G Universal Color Pastes (colour differs because of the basic colour of the silicone)
- Mixing viscosity: 15.000 ± 2.000 mPa·s
- Shore A hardness: 25 ± 2
- Tensile strength: > 4.9 N/mm²
- Elongation at break: > 480 %
- Tear resistance strength: > 31 N/mm
- Shrinkage (after 7 days): ? 0.3 %
No heat of reaction occurs during vulcanization, so that even larger quantities (e.g. 10 kg) can be poured without the risk of overheating.
Customer information:
The release agent Semiperm™ Monofilm in combination with PARTALL® Coverall Film PVA is suitable as a safe release agent for silicone moulds. This combination of release agents provides a barrier layer so that casting with epoxy resins is also possible without any problems. The service life (durability) of the moulds is significantly extended.
The release agent Semiperm™ Monofilm is applied with a brush. After flash-off, PARTALL® Coverall Film PVA is applied, also with a brush or sponge. For more information on processing, see the release agents.
PARTALL® Coverall Film PVA is transferred to the casting, washed off with water after demolding and reapplied before each impression.
Technical data
| Quantity / Length in meters: | 515 g |
|---|---|
| Contents of packaging: | 500g Komp.A + 15g Komp.B |
| Gefahrenhinweise: | H373 |