Heat deflection temperature: 120 °C

Carbon fibre plates (former designation ECOTECH) are made out of HT carbon fibre prepregs with a transparent epoxy resin matrix in press moulding. Resin content Ø 40 %.

Carbon fibre plates can be milled, sawn or cut by a water jet.

Before being used outdoors, the Carbon fibre plates must be coated with a UV varnish, as they turn slightly yellow when exposed to sunlight.

Construction:

• 0.2 and 0.5 mm: One or two layers of 200 g/m² carbon fabric prepreg, twill weave
• 0.3 and 0.6 mm: One or two layers of 245 g/m² carbon fabric prepreg, twill weave
• Less than or equal to 0.8 mm: Top layers of 200 g/m² carbon fabric prepreg, twill weave and the corresponding number of core layers of UD carbon fabric prepreg

Tolerances length and width:

• Sawn: ± 1 mm
• Cut by water jet (depending on the free capacity of the facilities): ± 0.3 mm

Tolerances thickness:

• Less than or equal to 0.8 mm: ± 0.1 mm
• 1 and 1.5 mm: ± 0.2 mm
• Bigger than or equal to 2 mm: ± 0.3 mm

Various sizes and thicknesses.

Hazards identification - Carbon fibre plates
Classification of the substance or mixture
The product is not classified according to the CLP regulation.
Labelling according to Regulation (EC) No 1272/2008: Void
Hazard pictograms: Void
Hazard statements: Void
Signal word: n/a