• Description

Description

Drop-shaped combi light module in white/green or white/red. Used, for example, as position and anti-collision lighting (strobe).

variant description
Version white/green: For use, for example, as a green position light and white collision warning light (strobe) in the surface tip on the starboard side (right).
Version white/red: For use, for example, as a red position light and white collision warning light (strobe) in the surface tip on the port side (left).

outlet

The combi light module can be connected directly to two SLC outputs (Smart Light Channel) of the Light Driver 5.0 lighting control system (see Accessories). No soldering work and no series resistors are necessary.

Intelligent lighting control
Plug & Play type recognition: The combi light module is automatically detected by the Light Driver 5.0 lighting control system. The lighting control regulates the luminosity and thus the heat generation according to the thermal properties of the module housing.
Max. Light Tracking (MLT): The light module can optionally be operated with full light output. An integrated heat sensor enables the Light Driver 5.0 lighting control system to automatically regulate the light output at high heat generation.

compatibility

The light module can also be used in conjunction with the Optotronix light control modules. For this purpose, a 3.9 Ohm resistor (3R9) must be soldered into the positive or negative lead for the green or white LED and a 10 Ohm resistor (10R) for the red LED.

Comments

Often bought together

Notification for this product