• Description

Description

Profiled high power radiator with 4W and very good beam angle due to special diffuser cap. The luminaire is supplied as a fully assembled unit on an aluminium mounting plate and a replaceable polycarbonate cap as a cover. The luminaire is ready assembled for operation with 2S Lipo (approx. 8V).For operation with 3S (12V) the enclosed resistor must be used, alternatively you can also use a 4W-3S adapter cable.

Please note that high-power LEDs can become very warm, up to 70°C is quite normal. These luminaires with heat sink mounting are suitable for continuous operation when air convection is possible. Check the operating temperatures after installation.



Technical data

Referenzleistung 4W
Spannung 8(12)V
Stromstärke 0.35A
Abstrahlwinkel >160°
Lichtstärke ca.~70 Lumen
Abmessungen 17x38x9mm (ohne Kabel)
Gewicht 4g (ohne Kabel)
Abmessung Bodenplatte 16x37 mm

Box Contents

  • 4W position light 16 mm
  • 1m connection cable and ready-made series resistor for 2S and resistor for 3S included



Comments

Notification for this product