• Description

Description

Extremely slim but powerful miniature position and flash light in one housing. The 5mm light bar outside very slim and fits optically also on small models, thin wings and is perfect for all sports models. Due to the new LED emitters, however, it has an extremely high light and flash output despite its micro dimensions and is therefore also well suited for larger models. The new, inwardly displaced cooling surface allows surprisingly compact dimensions with a uniquely slim design.

The luminaire is ready-made for operation with 2S Lipo (approx. 8V). When operating with 3S (12V), the enclosed resistor must be used. Please note that high-power LEDs can become very warm, up to 70°C is quite normal. These luminaires with heat sink housings are suitable for model flight operation if an air flow (in flight) is possible. If this is not the case, then switch-on times of 5-10 should not be exceeded. Check the operating temperatures after installation.

Technical Data:
  • Electric: 2Wx2 GREEN and 8Wx2 WHITE
  • Luminous intensity: ~140 lumens GREEN
  • Luminous intensity: ~450 Lumen WHITE
  • dimension: 38x5x4mm
  • Cooling surface dimension: 30x15x4 (use at least 2 heat sinks)


Technical data

Referenzleistung 2Wx2 GRÜN/8Wx2 WEISS
Spannung 8(12)V
Stromstärke -
Abstrahlwinkel >150°
Lichtstärke ca.140-450 Lumen
Abmessungen 38x5x4 mm
Gewicht 3g (ohne Kabel)

Box Contents

  • with 2x0.5m Teflon cable and ready-made series resistor for 2S, resistor for 3S included


Comments

Often bought together

Notification for this product