• Description

Description

Description

Caution danger of addiction!

Model is brought to height in a discus throwing technique. Without motor - only pure muscle power. Therefore there is no noise during flying which could disturb neighbours. A smaller flat meadow is suitable as a flying field.

Due to the special rudder unit the model climbs to considerable heights without swinging.
With a little practice you can quickly reach a casting height of about 40m. Experienced pilots can reach 60m, competition pilots 80m. The record is about 102m.
This is made possible by the innovative profile, the low surface depth and the torsionally stiff wing.
The good flight characteristics are given by the 7 degree wings V shape.
The flight picture while circling comes close to the eagle. But if the thermal is centered and the thermal flaps are set, the eagle will not follow.
In spite of the low weight, it is possible to fly in winds up to 15km/h without a payload. With the load test it is possible to fly in winds up to 40km/h.
Of course also on slopes!

Features:
- Robust and very good-natured gliding model
- Immediately available high-performance competition model (sink rate approx. 0.3m/sec)
- Flight weight RTF CW40 ca.215g , Textrem60 ca. 230g
- flies depending on thermal experience and weather between 3 and 15min in level flight environment.
- 1s Lipo with ca.600mah is enough for about 1 hour flying fun
- No motor drive necessary
- All parts prefabricated to fit exactly - easy to finish
- Full carbon fiber version
- Suitable as a thermal sniffer on the slope.
- No resin needed for finishing


Technical data

Wing-span (mm): 1490
Flight weight approx. (g): approx. 232g (Flight)
Empty weight approx. (g):
Control: H,S,Q
Manufacturer: OA-COMPOSITES
Fuselage: Carbon
Wings: Carbon
Version : ARF - ALMOST READY TO FLY
Receiver battery:
Lenght (mm):
empf.Motor:
Airfoil :
Flight Skill : Advanced
Building Skill : Advanced
Drive type:

Box Contents

- Wing, Leiwertke and fuselage in full carbon fiber
- Servo holder for KST X08 Servo
- various small parts for linkage, screws etc.
- Assembly instruction in english language

Videos

The product NRJ F3K ROT # 2 TEXTREME 60 from OA-COMPOSITES in the category Glider Models has a wingspan of 1490 and a weight of . The model is controlled via the functions H,S,Q*. The Model is Carbon .

* Explanation of control functions:
  • H ... Elevator
  • S ... Rudder
  • Q ... Ailerons
  • M ... Motor controlled
  • V ... Vector controlled
  • SK ... Airbrakes
  • WK ... Flaps
  • WZFW ... Retractable Landing Gear
  • SKU ... Glider Tow
  • ( ) ... optional - control functions written in brackets are optionally available for the described model

Comments

Notification for this product