-9%
  • Description

Description

Description

The lively Projeti2 inspires both by its arrow-fast flight (measured speed of over 200 km/h) and by its good-natured slow flight characteristics (lands at walking pace). The low weight in flight, the sophisticated aerodynamics and the high efficiency of the propeller drive give the Projeti a very high performance potential, which has characterized the Projeti for years.
We have adapted the Projeti to the new wishes and requirements and foam the model in the new EPO show. We have reinforced the model even further by foaming around a carbon fibre reinforcement tube right from the production stage. This ensures that the Projeti can safely withstand extreme flight manoeuvres even when the engine is hot.

A 6 mm carbon tube over 300 mm long is directly foamed into the wing and gives the Projeti enormous strength. This makes it almost unbreakable in flight!

A laser-cut aluminium motor mount with two motor length stops gives the Projeti high strength at the rear fuselage and allows the assembly of BL internal rotors with 28 mm diameter up to a maximum length of 45 mm. The engine mount additionally dissipates heat from the engine and is bonded to the foam as standard. The servo shafts have been enlarged to 29 x 28 x 15 mm for the installation of larger and stronger servos.

The newly designed, clearly visible Projeti 2 decorative set differs well from the top and bottom and contributes to good flight attitude recognition. The nose and back of the fuselage are painted inline to match the decorative set and are milled ready for installation.(To illustrate the part photos of the predecessor model)

scope of supply
  • One-piece fuselage/wings made of EPO* foam in white foam.
  • A 6 mm carbon tube over 300 mm long is directly foamed into the wing and gives the Projeti enormous strength. This makes it almost "unbreakable in flight!
  • A laser-cut aluminium motor mount with two motor length stops gives the Projeti2 high strength at the rear fuselage and allows the installation of BL internal rotors with 28 mm diameter up to a maximum length of 45 mm.
  • The engine mount additionally dissipates heat from the engine and is bonded to the foam as standard.
  • The servo shafts have been enlarged to 29 x 28 x 15 mm for the installation of larger and stronger servos.
  • NEW coloured decor printed on special foil.
  • Tail fins made of contoured balsa wood.
  • Fuselage back, canopy and nose made of impact-resistant PEG plastic, painted inline and contour milled ready for installation.
  • Complete rudder linkage, rudder horns made of GRP.
  • Extensive illustrated building instructions.



Technical data

Wing-span (mm): 820
Flight weight approx. (g): 650g
Empty weight approx. (g):
Control: H,Q,M
Manufacturer: IDEECON
Fuselage: EPO
Wings: EPO
Version: ARF - ALMOST READY TO FLY
Rec. Battery: 3S-4S LiPo 1800-2200mAh
Length (mm):
empf.Motor: BL Outrunner
Airfoil:
Flight Skill: Advanced
Building Skill: Advanced
Drive Type: Electro

Box Contents

- made of stable EPO* foam
- Carbon fibre reinforcement tube already foamed in
- Attractive decor set contributes to good flight attitude recognition
- Laser-cut aluminium engine mount, fully assembled


Videos

Das Produkt PROJETI RED EDITION BAUSATZ von IDEECON in der Kategorie Electric Jets hat eine Spannweite von 820 sowie ein Gewicht von 650g. Die Steuerung des Modells erfolgt über die Funktionen H,Q,M. Das Modell ist als ARF - ALMOST READY TO FLY ausgeführt . Wir empfehlen einen 3S-4S LiPo 1800-2200mAh Akku für dieses Elektroflugmodell.

* Erklärung Steuerfunktionen:
  • H ... Höhenruder
  • S ... Seitenruder
  • Q ... Querruder
  • M ... Motorsteuerung
  • V ... Vektorsteuerung
  • LK ... Landeklappen
  • SK ... Störklappen
  • WK ... Wölbklappen
  • EZFW ... Einziehfahrwerk
  • SKU ... Schleppkupplung
  • ( ) ... optional - in Klammer geschriebene Steuerfunktionen sind bei dem beschriebenen Modell optional verfügbar

Comments

Often bought together

Notification for this product