-43%
  • Description

Description

The ultimate 1000 W charging station for the professional model maker. Two 500 watt outputs each with up to 20 A charging current in one housing. The Mega-Power charger that recharges your LiPo drive batteries in the shortest time. The two charging branches work completely separately from each other and are individually adjustable. For the charging process, the display is split and thus the most important data of both outputs are displayed simultaneously. The display is a blue, backlit 128 x 64 pixel LC display. The menu navigation can be switched to the languages German, English or French. The integrated equalizer automatically brings the individual lithium cells to the same voltage level during the charging process. The equalizer current is approx. 250 mA and is also sufficient for batteries with a capacity greater than 5Ah. By connecting to the robbe PLC switching power supply 240V/40 A No. 8539, the charging station can also be operated stationary at home on the mains. Safe and simple operation and automatic storage of the most important battery data in the robbe BID system (Battery IDentification System).

The special advantages of the BID system:
  • Simply plug the BID key into the charger and the charging process starts.
  • No annoying setting of charging parameters in the menu
  • Maximum protection against operating errors
  • Storage of the most important battery data in the BID chip/key
  • Of course the Power Peak® Twin Charger can also charge batteries without BID system
  • 2 BID chips are included with the charger.


Functions:
  • 11...28V DC input
  • 2 x 0.1...20A charging current (max. 500W per output at 24 V operation, 250W at 12V operation)
  • 2 x 0.1...10A discharge current (max. 50W per output)
  • 2 x temperature sensor input (10-60°C)
  • 2 x 20 internal battery data memory locations
  • 128 x 64 pixels blue illuminated LCD display
  • 10 melodies (selectable for each channel)
  • USB port for firmware upgrades


NC/NiMH batteries:
  • 2 x 1...18 NC/NiMH cells - charging, discharging and cycle charging 1-10 x
  • Charging Methods, Automatic, Normal, Linear and Reflex Charging
  • Adjustable trickle charge
  • Adjustable peak sensitivity


Lithium batteries, LiIo (3.6V), LiPo (3.7V) or LiFe (3.3V):
  • 2 x 1...7 Lithium cells - Charging and discharging
  • Charging power up to 5C selectable
  • TCS (Terminal Capacity Selection) switch-off point in the CV charging range (10-100%)
  • maximum cell voltage adjustable
  • Safety timer switch-off (10...120%)
  • Maximum capacity shutdown (10- 150%)
  • Storage mode (60%)


Lead-acid batteries:
  • 2 x 2...24V Pb lead-acid batteries - Charging and discharging


Technical data

Input Voltage 11-28V/DC
Rechargeable batterie-types NiMH/NiCd/LiPo/LiFe/Pb
Rechargeable cell count 1-7 Lixx, 1-18 Nixx, 1-12 Pb (2x)
Charge current (max) 20 A (2x)
Discharge current 2 x 0,1...10 A
Cut-off CC-CV Automatikabschaltung
Power [W] 1000 W

Box Contents

  • je 2x 7 Zellen Balancer Adapter XH / FP-TP / PQ
  • Temperatursensor
  • 2 x BID CHIP mit Kabel


Comments

Often bought together

Notification for this product