• Description

Description

Hints!

Please be aware that this product can only be shipped to the following countries: Austria, Germany, Switzerland, France, Italy, Belgium, Bulgaria, Denmark, Great Britain, Croatia, Luxembourg, Netherlands, Poland, Romania, Sweden, Slovakia, Slovenia, Czech Republic, HungaryPlease note that shipping this item to Finland is not possible!

QUALITY AND PROPERTIES:


  • High-quality synthetic resin quality
  • Fast drying
  • Suitable for painting and repairing objects indoors and outdoors
  • Good covering and filling power
  • Colour and gloss resistant
  • Weatherproof, lightfast, UV-resistant
  • Excellent colour gradient for even surfaces
  • Excellent adhesion on almost all materials
  • Scratch, impact and shock resistant


PHYSICAL AND CHEMICAL DATA:


  • binder basis: alkyd resin
  • Color: color tone specific
  • Smell: of solvents
  • Temperature resistance: up to 80°C
  • gloss level: at 60° measuring angle according to DIN 67530
  • glossy: 85-90 GE
  • semi-matt: 30-35 GE
  • matt: 10-15 GE


yield:
Depending on the nature and colour of the substrate, the following are sufficient
  • 150 ml for approx. 0.3 - 0.45 m²
  • 400 ml for approx. 0.8 - 1.2 m²
  • 600 ml for approx. 1.2 - 1.8 m²
  • drying (at 20°C, 50% relative humidity):
  • Dust dry: after 30 minutes
  • Non-sticky: after 4 hours
  • Fully dried: after approx. 24 hours
  • Overpaintable: within 2 hours or after approx. 24 hours
  • The drying time depends on the ambient temperature, the humidity and the applied layer thickness.
  • Shelf life/storage:
  • 10 years with proper storage (=10°-25°C, relative humidity of max. 60%)
  • container/content:
  • Aerosol cans, maximum nominal volume 150, 400 or 600 ml



USER'S INSTRUCTIONS:


With many MODEL-COLOR spray paints, spray protection and an anti-burglar cap prevent unauthorised use. Follow the instructions on the cap or label.
Always read and observe the cautionary texts carefully before use!

Application


Substrate pretreatment:
  • The substrate must be clean, dry and free of grease.
  • Remove loose old coatings and rust, then sand and prime.
  • Pre-treat plastic parts with MODEL-COLOR Plastic Primer.
  • Allow to dry for 1 - 2 hours.


Painting:
  • Tape off areas not to be painted.
  • Shake can for 3 minutes before use.
  • Test the test spray and paint compatibility in an inconspicuous place.
  • Spray distance: approx 25 cm
  • Spray on several thin layers at intervals of approx. 2 minutes.
  • Overpaintable within 2 hours or after 24 hours.
  • Do not spray over with acrylic paint even after drying!


TIPS FOR SPRAY PAINTING:


Protect the object and the environment from spray mist.
Temperatures should be between +10°C and +25°C, max. humidity 60 %.

Store in a dry place. Protect from sunlight or other sources of heat. Spray only in dry weather and in areas protected from the wind and in well-ventilated rooms. Observe further information on the label!


environment and label:


Environmentally friendly: The products are 100% free of harmful heavy metals. The caps and packaging are made of recyclable materials.

Disposal: Only recycle completely emptied containers. Take containers with remnants to the problematic waste site.

Labelling:
All MOTIP DUPLI products comply with the current labelling regulations. The classification, classification and labelling is carried out according to GHS or CLP 1272/2008/EC in the current valid form. The safety data sheets comply with REACH 1907/2006/EC, Article 31 and Annex II, in the currently valid form.

Technical data

Content 400 ml
Color white

Comments

Often bought together

Notification for this product