• Description



Please be aware that this product can only be shipped to the following countries: Austria, Germany, Switzerland, France, Italy, Belgium, Bulgaria, Denmark, Great Britain, Croatia, Luxembourg, Netherlands, Poland, Romania, Sweden, Slovakia, Slovenia, Czech Republic, HungaryPlease note that shipping this item to Finland is not possible!

You're someone who likes to have it easy to fix? Someone who gets nervous when he's got to work forever? Then you are in good hands with mibenco® liquid rubber SPRAY! You don't have to mix and mix or even calculate the dilution. With mibenco® liquid rubber SPRAY you can start right away!

You want to protect a wooden table from rot? Give me the SPRAY!
You want to dive your bathroom door in sea blue? Simply spray off!

The liquid rubber from mibenco® SPRAY can do all this and much more: strongly covering, water-repellent, resistant to strong sunlight. Egal, whether outside temperatures of minus 40 degrees or 120 degrees are positive. The rubber coating withstands the greatest strains. Water, sun, salts. The material is unimpressed by this without becoming brittle or fragile. You spray, the rest is done by the elastic material. Quality "Made in Germany"!

mibenco® liquid rubber SPRAY is also very flexible in its use. Car, garden, house. Everywhere. The SPRAY adheres to (almost) all materials: wood, metal, stone, glass, plastic and many more. mibenco® liquid rubber SPRAY is particularly suitable for restoring the gloss of outdated surfaces and protecting valuable surfaces from damage.

The rubber coating beautifies and protects. For years. Even textiles can be treated with it. Since the complete rubber coating is available as SPRAY, repairing, repairing and embellishing is quick and easy: shake, spray, ready!

If you want to change the color, simply peel off the old color. This is as easy as spraying before. You can choose from more than 40 colours - whether matt or glossy.

1. find a suitable environment
Depending on the size of the object to be coated, the application area should also offer sufficient space and good ventilation so that no dust particles or insects are trapped in your coating. Avoid direct sunlight.

2. have the necessary accessories ready
This includes e. g. adhesive tape, paint mask (so that you do not inhale solvents), disposable gloves, old newspapers for masking uncoated surfaces.

3. pretreat the surface to be coated.
The surface must be made free of dust and grease before coating. Any dirt between the surface and the liquid rubber coating can lead to an uneven result. Here we recommend our mibenco® PRE-CLEANER.

4. the surface must be dry
Dry the surface well after cleaning. We recommend our mibenco® MICROFIBER CLOTH. Avoid textiles with logos and motifs or paper towels as they can scratch the surface.

5. glue surfaces not to be coated from.
Although mibenco® liquid rubber is easy to remove, you should ease your work by masking off surfaces that are not to be coated. For example, glue windows, logos or similar items that you do not want to coat with newspaper and adhesive tape.

6. prepare liquid rubber
If you use our spray can for the coating, it must be shaken vigorously for a few minutes so that the pigments can adhere to the liquid rubber. Use the PURE or SPRÜHFERTIGE material, stir it carefully with a clean stirring rod for several minutes (avoid air inclusions).

7. spray in several shifts
We recommend that you start with the edges and continue working in the cloister. Each layer takes about 10-15 minutes to dry. Important note! To prevent craters and unevenness, do not touch the freshly coated surface. Allow them to dry thoroughly first. After drying out, you can touch them without hesitation. It is recommended to wear a paint mask and eye protection during the coating process.

8. spray the first layer only very thin
It is important that the first layer of spray film is only sprayed very thinly. Optimal is a transparency between 40 - 50 % between the surface and the first layer of spray foil. The first layer of spray film serves as a bonding layer between the surface and the mibenco® liquid rubber material. This results in a better and more durable adhesion of the further layers. Spray mibenco® liquid rubber in the cloister and make sure to keep a distance of approx. 15 to 20 cm from the surface. Depending on the ambient temperature, each layer of spray film takes approx. 10 - 15 minutes to dry until the next layer can be applied.

9. spray further layers
Spray additional layers of liquid rubber (spray film). Depending on the colour of the liquid rubber, the spray foil covers 2-3 layers. Each additional layer applied after the third layer is used for the durability of the liquid rubber coating and, above all, for easy peelability. We recommend a minimum of 5 coats, as this ensures easy removal. If the liquid rubber coatings are too thin, you can only remove the coating in small pieces and we recommend the use of our mibenco® REMOVER.

remove 10th tape and newspaper
Remove adhesive tape and newspaper immediately after the last application (last layer) which you have applied as a cover. This must be done before the last layer is dry, otherwise you have to remove the liquid rubber again.

note 11. drying time
From this point on, the mibenco® spray foil takes about 6-7 hours to cure completely. Avoid any contact with the coated surface during this time. You can drive through the (textile) washing plant after one week.

Good luck and enjoyment with your mibenco® products!
You didn't find your desired colour in our shop? All our colours can be mixed with each other (as in the ink fountain!

You can coat approx. half a square meter with a can. It is always important that at least 5 layers of our material are applied, so that it can be easily removed later on.

Technical data

Content 400 ml
Color black matt

Box Contents

400 ml



Often bought together

Notification for this product