• Description

Description

"Dune Bashing" if you want to experience sporty outdoor pleasures, you should experience them with the Hot Shot ASB1. If your lawn is just a desert and the stream in front of your door is like a stretch of mud, make the most of it - let the ASB1 out!Following the example of the big sand buggies, which are the latest fashion in Dubai for example, the ASB1 comes with an open cage and lots of driving fun. Jump, race, let the dust fly - do what you want, your ASB1 knows no limits. This is ensured by the best plastic and a completely covered chassis. You also get your charger and the right battery on top. Enjoy the fun of the sheikhs and start your "Dune Bashing".

Features:
  • Fully encapsulated main drive - prevents the penetration of stones or other foreign bodies
  • aluminium shaft drive with steel receptacles
  • The vehicle is completely ball bearing mounted and therefore very smooth and durable
  • Two built-in cone differentials transmit the torque optimally and compensate for speed differences, e.g. during cornering.
  • Differential outputs made of steel
  • The oil pressure shock absorbers can be perfectly adjusted to any slope using a knurled screw
  • Aluminium engine mount
  • steel CVD shafts on the front axle
  • Track rods adjustable via right/left-hand threads
  • chassis stiffeners through a dirt cover over the electronics ( controller, receiver and battery)
  • 3mm aluminium shock towers V/H
  • Prepared for brushless and LiPo operation
  • Extremely robust body completely designed
  • The reinforced plastic parts are on the one hand very resistant and on the other hand provide the necessary degree of deformation to survive many "accidents" without damage.


Technical Data:
Dimensions ( L/W/H) Dimensions ( L/W/H) 430x285x155 mm
Weight 2170 g
wheelbase 293 mm
ground clearance 40 mm
front track 230 mm
track rear 230 mm
Tyres: Ø ± 105 mm / width 50 mm front - 50 mm rear
ASB1 chassis
Viscosity damper Oil : 400 v/h
Spring force damper : medium
Shock absorber installation length: front 85mm / rear 85mm
Viscosity differential oil: front 1,000 / rear 3,000
Internal gear ratio : bevel pinion 13T / ring gear 43T
Motor ratio : Main gear 55T / Motor pinion 20T (module 0.8)

Technical Data Speed Controller AB1:
  • Waterproof 40 A brushed regulator
  • NiMH / LiPo operation
  • Short-term load. 180 A forward / 90 A reverse
  • Forward / Brake / Reverse Function
  • BEC 5 V / 2 A
  • Operating voltage 7.2 - 7.4 V
  • motor limit > 12 T at 7.4 V < 30,000 rpm at 7.2 V
  • Connector System : Tamiya
  • Dimensions: (L/W/H) 46.5 x 34 x 28.5 mm
  • Weight 70 g
  • Plug & Drive System
  • On/Off switch


Technical Data Motor Thrust eco:
  • 15 turns
  • 30,000 rpm
  • 16 A
  • 7.2 volts
  • Size 550
  • shaft length 9.6 mm Ø 3.17 mm
  • Motor Dimensions: Length 57 mm Ø 36.7 mm


Technical Data Servo S40PH:
  • Size - Car Standard
  • actuating force 4,0 Kg @ 4,8V
  • operating time 0.16 Sec / 60° @ 4.8V
  • Gearbox - Nylon
  • sprocket - 25 teeth
  • Plug-in system - JR
  • dimensions (LxWxH) 40.2 mm x 20.4 mm x 39.8 mm
  • hole spacing - 49,7 mm
  • voltage - 4.8 - 6.6V
  • Weight - 43 g
  • 1 ball bearing


Technical Data Remote Control:
  • 2 channel transmitter
  • 3 channel mini receiver
  • Reverse function
  • Dual rate and trim adjustable
  • Battery compartment for 4 Mignon AA cells (not included)

Required accessories:
4 Mignon cells AA for remote control ( not included)


Technical data

Engine Type : Electric
Drivetrain : 4WD
Scale : 01:10
Chassis : ASB1
Use : OFFROAD
Length : 430 mm
Width : 285 mm
Rec. Engine : Thrust eco 15T
Version : RTR - READY TO RUN
Brand of car
Drive / Build : 11.jpg

Box Contents

- Fully assembled Sand Buggy ASB1
- 2.4 GHz remote control CR2SV2
- Waterproof and LiPo compatible 40A brushed controller with Tamiya connector
- Water-resistant and powerful steering servo with 4 kg actuating force
- 15 Turn Brushed motor size 550 with heat sink
- NiMH Racing Pack
- charger
- Instruction



The company ABSIMA was founded in September 2011 in Nürnberg, Germany. As exclusive dealer for Team C Racing in Europe, Absima is one of the leaders in the RC Car industry worldwide. Absima offers a large selection of Cars in 1:10 and 1:8 scale, as well as thousands of quality spare and tuning parts, RC transmitters, servos, speed controllers, electric and glow motors, battery packs, and RC boats. From Ready to Run beginner kits to competition RC models, Absima has you covered!

Comments

Often bought together

Notification for this product