TAMIYA KING YELLOW 1/18 6WD EP KIT WITH PAINTED BODY

The King Yellow is TAMIYA´s second 6-wheel powered RC model!

It is based on the GF-01 chassis and was extended by one axle. In the kit the model is delivered with a steerable front axle. It can optionally be equipped with a steerable rear axle. For this an additional servo is needed.
The 540 electric motor is located behind the front axle, which gives the model a lot of grip (up to 40 degrees incline!), especially when driving uphill. The 3 differentials make the model despite its length agile and agile.
The bodywork is based on an American school bus and makes the model a real fun vehicle!

Technical Details:
- Kit model in scale 1:18
- LACKED CAROSSERY - LIMITED!
- Length 478 mm, width 270 mm, height 239 mm,
- Wheelbase 173mm+126mm
- encapsulated 6-wheel all-wheel drive
- 3 Differentials
- small turning circle
- Polycarbonate body - replica of an American school bus
- the model is delivered with a front wheel steering.
- The rear axle can also be built steerable (servo required).
- chromed rims with 113 mm tyres
- Independent wheel suspension front and rear
- powerful 540 electric motor

WARNING:
Before you begin assembly, you should read and understand all instructions. If a child is assembling the model, a supervising adult should also have read the assembly instructions.
Tools, including knives, are used when assembling the kit. Special care should be taken to avoid injury.
If difficulties arise during assembly, ask an adult to supervise the work or a model builder with RC experience or a specialist dealer.
Only use tools for their intended purpose. Incorrect use may result in injury.
If you use paint and/or glue (not included in the kit), follow the instructions provided with the kit. Keep the kit away from small children. Do not allow children to put any components in their mouths or pull plastic bags over their heads.

Comments