RC4WD Warn 1/10 Wireless Remote/Receiver Winch Controller Set
This is the all new Licensed Warn Wireless Winch Controller Set. These have been Officially Licensed by the Warn Industries and are only available from RC4WD and our Dealers.
Over 50ft Range
Total Length: 2in / 50.5mm
Total Width: 1in / 25mm
Height: 0.53in / 13.5mm
Weight: 0.38oz / 11g
Small Compact Size
Operating Voltage 6V to 11.1V
Easy Plug and Play
Length: 1.6in / 40.4mm
Width: 1.2in / 30.2mm
Height: 0.37in / 9.4mm
Weight: 0.5oz / 14g
Length: 6in / 150mm
Wires Weight: 0.14oz / 4g
30 Day Warranty
Manufactured by RC4WD
Shown with RC4WD Carabiner with Web Strap & Keyring (Z-L0060) for example (Not Included)
1x WARN 1/10 Wireless Remote
1x Wireless Receiver Unit
1x 6" Battery/Receiver Power Wire
1x 6" Receiver/Winch Control Wire
1x Warn Decal Sheet
1/10 Warn 9.5cti Winch (Z-S1079)
For Shorter Wires 3" Wiring Pack (Z-S1001)
For Longer Wires 9" Wiring Pack (Z-S0999)
RC4WD Carabiner with Web Strap & Keyring (Z-L0060)
RC4WD Y Harness with Tamiya Leads (Z-S1577)
Replacement Battery for Warn Wireless Controller (Z-E0053)
Replacement Case for Wireless Receiver (Z-S1094)
RC4WD Replacement Case for 1/10 WARN Wireless Transmitter (Z-S0966)
This product is not waterproof. You may be able to waterproof on your own, but this will void the manufactures warranty.
For Warnings, Precautions, Safety and Damage Limits: Click Here
If for any reason you cut the wires on the control box, this will void the warranty.
Binding process can take 3-5 seconds.
Some Lipo battery voltage can be higher than 11.1 volts. Please be careful and check voltage before using your battery. Use a BEC if needing to use a 3 cell lipo.