FUTABA GY440 AVCS HELI SPINNER

Downloads

Manual – English

Description

FEATURES:
- Basic settings via switch and setting controller on the device
- No PC and setup software required
- Switchable AVCS / Normal Mode
- Adjustable travel (limit)
- With connection for S.BUS / S.BUS2
- neutral pulse 760 or 1520µs
TECHNICAL DATA
- Operating voltage: 4.0...8.4V
- Current: 30 mA (without servo)
- Weight: 3,7 g
- Dimensions: 20.5 x 20.5 x 11 mm
- Temperature range: -10...+45°C

DESCRIPTION:
The latest gyro generation GY440 weighs only 3.7g and is the further development of the proven GY430!
By using the latest MEMS sensor technology (MEMS = Micro-Electro-Mechanical Systems) the small size of only 20.5 x 20.5 x 11 mm is finally achieved.
Another advantage of the MEMS sensors is their speed, especially for the fast figures of 3D acrobats, the GY440 offers fast control behavior and hard "snapping in".

Suitable for all types of helicopters (electric and combustion) as well as rotor diameters. Also for small helicopters, because the low weight of the small Power E helicopters requires high control speeds.
All necessary settings can be made via switch or controller on the gyro itself, no PC and setting software required.
Both connection sides are pluggable and can be easily adapted to model conditions by means of different patch cables (plug/plug) of different lengths.

Note: Only for Digital Servos!

Comments