• Description

Description

Simple plug-in system for wing cabling for up to 4 servos.

The PWC4 surface connector is screwed into the root rib. The servo cables are simply plugged onto the pin strip of the connector in the surface and secured with the supplied heat-shrink tubing.
The patch cables to the receiver are connected to the pin strip of the PWC4 fuselage connector. These connectors are also secured with the shrink tube supplied.

The advantages of the PWC PowerWingConnector System:
- Reverse polarity protected
- Protected against e.g. vibrations by locking
- Simple assembly due to pre-assembly
- No soldering necessary
- Up to 11A continuous current


PWC (Power Wing Connector) the simple plug-in system for wing cabling for up to 6 servos. The PWC panel connector is screwed into the root rib. The servo cables are simply plugged into the connector pin strip on the surface. The PWC hull cable is laid in the hull. The PWC patch cables are connected to the pin strip at the end of the cable and routed to the receiver.

Features:
- Reverse polarity protected
- Protected against e.g. vibrations by locking
- Simple assembly due to pre-assembly
- No soldering necessary
- up to 11A continuous current and 3 servos (PWC3) or 22A and 6 servos (PWC6)


Box Contents

- PWC4 Panel connector
- PWC4 fuselage bushing and 2 shrink tubes


Security finally has a name - Emcotec! Quality Made in Germany since 1988. Emcotec develops products, from their own production, for the RC market in the highest quality. Top pilots from all over the world trust Emcotech with their power supplies and electronic switches.

Comments

Often bought together

Notification for this product