• Description

Description

Description

Features:
- double regulated output voltage
- Output voltage optionally adjustable to 5.9V or 7.4V via software with the sensor switch
- Informative graphic OLED display with a resolution of 128x64 pixels
- Connection option for return channel bus systems MPX and Spektrum, HoTT and JETI EX
- Transmission of the battery voltages and capacities of both batteries directly to the transmitter
- Voltage display for each battery
- Remaining capacity display for both batteries
- Minimum value memory for both batteries
- Large cooling surfaces ensure high controller performance
- Support of all common battery types: LiPo, NiMh/NiCd, LiFePo
- Suppression of any servo reverse currents that may occur
- by using different patch cables MPX/JR/Futaba, MPX/MPX universally applicable for all receiver types
- Operating voltage: 4.0 Volt to 9.0 Volt
- Power supply:
- 2 x 2 cell LiPO battery 7.4 Volt
- 2 x NiCd or NiMH batteries with 5 cells,
- 2 x 2 cell LiFePo battery (A123)
- Power consumption:
- switched on state approx. 85 mA
- switched off state approx. 10 µA
- Dropout voltage: approx. 0.25 V
- Max. Receiver and 2 x 10 A (stabilized) depending on cooling
- Servo and receiver current: peak 2 x 20 A
- OLED display resolution: 128x64 pixels
- Bus Systems: Spectrum, Multiplex, HoTT, JETI EX
- Temperature range: -30 °C to +75 °C
- Dimensions: 93 x 67 x 19 mm (incl. base plate)
- Weight: 88 g
- SensorSwitch: 15 g
- Power 2x20 A
- EMC test: EN 55014-1:2006
- CE approval: 2004/108/EG
- Utility model protected: EN 203 13 420.6

Comments

Often bought together

Notification for this product