• Description



Manual – English


Compact and lightweight 10 channel receiver R3008SB 2.4 GHz, T-FHSS®, with integrated telemetry transmitter.

Despite its small dimensions of 47.3 x 24.9 x 14.3 mm and a weight of only 11 g, the R3008SB receiver is a multi-talent. It has an integrated telemetry transmitter and can transmit up to 32 telemetry data sets with a range of up to 1000 m to the ground.
Of course the receiver has 8 PWM outputs for normal servos. Channel 8 can be switched to S.BUS(1) mode, so that up to 10 S.BUS(1) servos or devices can be connected to this output.

Switching channels 9 and 10 are only accessible via the S.BUS 1 or 2 output and require corresponding S-BUS compatible devices / servos. Via the separate, bidirectional S.BUS2 connection, both S-BUS2 servos and sensors can be connected and up to 32 telemetry channels can be transmitted. The integrated transmitter transmits the telemetry data at the S.BUS2 connection to the T-FHSS® transmitter, where they are shown on the display or output acoustically (voice, vibration alarm, sound or beeper).

When the receiver is connected, data such as receiver battery voltage, external voltage (up to 70V DC) and antenna signal strength, i.e. the most important telemetry data, are automatically transmitted to the ground.

This receiver works "only" with the new telemetry-capable T-FHSS® transmitters. It is not compatible with FASST or FASSTest® or S-FHSS transmitters or these modulation modes
Recommended accessories: F1001100 Connection cable "Extra Voltage" with fuse.

Technical data

Channels: 10
L/W/H (mm): 47/25/14,3
Weight (g): 11


Often bought together

Notification for this product