Description Compact and lightweight R7008SB receiver 2.4 GHz, FASSTest®, with integrated telemetry transmitter. Despite its small dimensions of only 47.3 x 24.9 x 14.3 mm and a weight of only 13 g, the R7008SB receiver is a multi-talented all-rounder. It has an integrated telemetry transmitter and can transmit up to 32 telemetry data sets with a range of > 1000 m to the ground. Of course, the receiver has 8 PWM outputs for normal servos. The PWM outputs can be switched over, so that the PWM channels 1... 8 or 9... 16 are available. For 16 PWM channels, 2 receivers must be operated in parallel.
Channel 8 can be switched to S. BUS operation, so that up to 18 S. BUS servos or devices can be connected to this output.
S. BUS2 devices or sensors can be connected via the S. BUS2 connection and up to 32 telemetry data sets can be transmitted. When two receivers are used, the number of telemetry channels increases to 64.
The transmitter integrated in the receiver transmits the telemetry data on the S. BUS2 connector to the FASSTest® transmitter, where it is shown on the display or acoustically output. Via a separate Wi-Fi Rx-Box (No. F1667) the telemetry data can be additionally transmitted to smart phones (Android, Apple), netbooks, laptops, etc., and connected monitors.
When the receiver is connected, data such as receiver battery voltage, external voltage (up to 70V-DC) and antenna signal strength, i. e. the most important telemetry data, are automatically transmitted to the ground.
This receiver works "only" with the new telemetry-capable FASSTest® transmitters. If the receiver is to be operated with FASST or RASST transmitters, use No. F1002, R6308SBT 2.4 GHz FASST.
Recommended accessories: F1001100 "Extra Voltage" connecting cable with fuse.
Frequency channels: 36
Dimensions: 47 x 25 x 14,3 mm
Antenna length: 14 cm
Frequency range: 2.4-2.4835 GHz
Number of channels: 18
Transmission system: FASSTest
Weight approx.: 13 g
Channel spacing: 2048 kHz
Current: 50 mA
Voltage: 3.7... 7.4 Volt (4-5Nx, 2 LiFe, 1-2 LiPo)