• Description


These CNC manufactured Aluminium servo levers are not only connected to the servo from above with the mounting screw, but also with two hexagon socket screws on the side. With these two screws the servo arm is clamped to the output shaft and still ensures maximum hold even if a screw is lost. A further advantage is that it is now 100% backlash-free connected to the servo, which results in a more direct linkage and also relieves the gearbox.

This double servo arm has a height difference between the two sides, making it ideally suited to control the gas & brake linkage of off-road vehicles. The double brake linkage at the centre differential inevitably results in a difference that can be perfectly absorbed with this servo horn.

- Total length of servo arm: 56mm
- Thickness of the arm: 3mm
- Total height: 7mm
- Offset for servo gears: 3mm
- Difference in height of the two levels: 2mm
- Mounting holes: M3 (2 pcs.)
- Hole spacing mounting holes to the middle: 20mm (hole 1) / 24mm (hole 2)

Suitable for:
Servos with 25 teeth gear rim / output shaft
e.g.: Futaba / ThunderTiger / Savöx / Hitec

Technical data

Suitable for :
Material Aluminium
Hole spacing 20/24 mm
For servo Futaba/Thunder Tiger/Savöx/Hitec
Color red

Box Contents

- 1 pcs. Anodized double arm servo lever 25. teeth
- 2 pcs. hexagon socket screws


Often bought together

Notification for this product